%% BEGIN pst-fill.tex
%%
%% Filling and tiling with PSTricks 97.
%%
\def\fileversion{97 patch 2}
\def\filedate{1997/12/12}
%%
%% COPYRIGHT 1994, by Timothy Van Zandt, tvz@Princeton.EDU
%% See pstricks.tex for copying restrictions.
%%
%% Note (D.G. - April 8, 97 and November / December 97):
%% * With a \PstTiling macro defined (or "tiling" optional parameter
%%   on \usepackage[tiling]{pst-fill}), this file run exactly as
%%   the original boxfill.tex file from Timothy, version 0.94,
%%   except a correction in \pst@ManualFillCycle to avoid a division by 0.
%%   It's the default.
%% * With a \PstTiling macro defined (or "tiling" optional parameter
%%   on \usepackage[tiling]{pst-fill}) there are several add-ons
%%   and changes to do `tiling' rather than `filling' in "automatic" mode :
%%     - we fix the position of the beginning of tiling,
%%     - we allow normally the framing of the area as expected, using
%%       the line.... parameters
%%     - we define move parameters fillmovex, fillmovey and fillmove,
%%     - we define fillcyclex as previous fillcycle parameter, and add the
%%       fillcycley and fillcycle (both fillcyclex and fillcycley) ones
%%     - we can extend the tiling area using fillloopaddx, fillloopaddy and
%%       fillloopadd parameters,
%%     - we can debug and see the whole tiling area without clipping using
%%       PstDebug parameter,
%%     - for names consistancy, we can use fillangle in place of boxfillangle
%%       and fillsize in place of boxfillsize,
%%     - default value for fillsep is 0 and for fillsize is auto.

% Preliminaries:

\message{ v\fileversion, \filedate}

\csname PSTboxfillLoaded\endcsname
\let\PSTboxfillLoaded\endinput

\ifx\PSTricksLoaded\endinput\else
  \def\next{\input pstricks.tex}
  \expandafter\next
\fi

\edef\TheAtCode{\the\catcode`\@}
\catcode`\@=11

% The box:

\newbox\pst@fillbox
\def\psboxfill{\pst@killglue\pst@makebox\psboxfill@i}
\def\psboxfill@i{\setbox\pst@fillbox\box\pst@hbox\ignorespaces}

% Parameters:

\def\psset@boxfillsize#1{%
  \def\pst@tempg{#1}\def\pst@temph{auto}%
  \ifx\pst@tempg\pst@temph
    \let\psk@boxfillsize\relax
  \else
    \psset@@boxfillsize#1(\z@,\z@)\@empty(\z@,\z@)(\@nil
  \fi}
\def\psset@@boxfillsize#1(#2,#3)#4(#5,#6)#7(#8\@nil{%
  \begingroup
    \ifx\@empty#7\relax
      \pst@dima\z@
      \pst@dimb\z@
      \pssetxlength\pst@dimc{#2}%
      \pssetylength\pst@dimd{#3}%
    \else
      \pssetxlength\pst@dima{#2}%
      \pssetylength\pst@dimb{#3}%
      \pssetxlength\pst@dimc{#5}%
      \pssetylength\pst@dimd{#6}%
    \fi
    \xdef\pst@tempg{%
      \pst@dima=\number\pst@dima sp
      \pst@dimb=\number\pst@dimb sp
      \pst@dimc=\number\pst@dimc sp
      \pst@dimd=\number\pst@dimd sp }%
  \endgroup
  \let\psk@boxfillsize\pst@tempg}

\psset{boxfillsize={(-15cm,-15cm)(15cm,15cm)}}

\def\psset@boxfillcolor#1{\pst@getcolor{#1}\psboxfillcolor}
\psset@boxfillcolor{black}

\def\psset@boxfillangle#1{\pst@getangle{#1}\psk@boxfillangle}
\psset@boxfillangle{0}

\def\psset@fillsepx#1{\pst@getlength{#1}\psk@fillsepx}
\def\psset@fillsepy#1{\pst@getlength{#1}\psk@fillsepy}
\def\psset@fillsep#1{\psset@fillsepx{#1}\let\psk@fillsepy\psk@fillsepx}
\psset@fillsep{2pt}

% DG addition begin - Apr. 8, 1997 and Nov. 1997 - Patch 2
\ifx\PstTiling\@undefined
\def\psset@fillcycle#1{\pst@getint{#1}\psk@fillcycle}
\psset@fillcycle{0}
\else
% For consistancy, use "fill" as prefix for angle and size
\def\psset@fillangle#1{\psset@boxfillangle{#1}}
\def\psset@fillsize#1{\psset{boxfillsize={#1}}}
% Change some default values with better ones for tilings
\psset@fillsep{0}
\psset{fillsize=auto}
% Define fillcyclex (previously fillcycle), fillcycley and fillcycle for both
\def\psset@fillcyclex#1{\pst@getint{#1}\psk@fillcyclex}
\def\psset@fillcycley#1{\pst@getint{#1}\psk@fillcycley}
\def\psset@fillcycle#1{%
\psset@fillcyclex{#1}\let\psk@fillcycley\psk@fillcyclex}
\psset@fillcycle{0}
% Define fillmove, fillmovex and fillmovey parameters
\def\psset@fillmovex#1{\pst@getlength{#1}\psk@fillmovex}
\def\psset@fillmovey#1{\pst@getlength{#1}\psk@fillmovey}
\def\psset@fillmove#1{\psset@fillmovex{#1}\psset@fillmovey{#1}}
\psset@fillmove{0pt}
% Define fillloopaddx, fillloopaddy and fillloopadd parameters
% if tiling is not complete
\def\psset@fillloopaddx#1{\pst@getint{#1}\psk@fillloopaddx}
\def\psset@fillloopaddy#1{\pst@getint{#1}\psk@fillloopaddy}
\def\psset@fillloopadd#1{%
\psset@fillloopaddx{#1}\let\psk@fillloopaddy\psk@fillloopaddx}
\psset@fillloopadd{0}
% For debugging (to debug, set PstDebug=1)
\def\psset@PstDebug#1{\pst@getint{#1}\psk@PstDebug}
\psset@PstDebug{0}
\fi
% DG addition end

% Main macro:

\def\psfs@boxfill{%
  \ifvoid\pst@fillbox
    \@pstrickserr{Fill box is empty. Use \string\psboxfill\space first.}\@ehpa
  \else
    \ifx\psk@boxfillsize\relax
      \pst@AutoBoxFill
    \else
      \pst@ManualBoxFill
    \fi
  \fi}

% Manual box fill:

\def\pst@ManualBoxFill{%
  \leavevmode
  \begingroup
    \pst@FlushCode
    \begin@psclip
    \pstVerb{clip}%
    \expandafter\pst@AddFillBox\psk@boxfillsize
    \end@psclip
  \endgroup}

\def\pst@FlushCode{%
  \pst@Verb{%
    /mtrxc CM def
    CP CP T
    \tx@STV
    \psk@origin
    \psk@swapaxes
    \pst@newpath
    \pst@code
    mtrxc setmatrix
    moveto
    0 setgray}%
  \gdef\pst@code{}}

\def\pst@AddFillBox#1 #2 #3 #4 {%
  \begingroup
    \setbox\pst@fillbox=\vbox{%
      \hbox{\unhcopy\pst@fillbox\kern\psk@fillsepx\p@}%
      \vskip\psk@fillsepy\p@}%
    \psk@boxfillsize
    \pst@cnta=\pst@dimc
    \advance\pst@cnta-\pst@dima
    \divide\pst@cnta\wd\pst@fillbox
    \pst@cntb=\pst@dimd
    \advance\pst@cntb-\pst@dimb
    \pst@dimd=\ht\pst@fillbox
    \divide\pst@cntb\pst@dimd
    \def\pst@tempa{%
      \pst@tempg
      \copy\pst@fillbox
      \advance\pst@cntc\@ne
      \ifnum\pst@cntc<\pst@cntd\expandafter\pst@tempa\fi}%
    \let\pst@tempg\relax
    \pst@cntc-\tw@
    \pst@cntd\pst@cnta
    \setbox\pst@fillbox=\hbox to \z@{%
      \kern\pst@dima
      \kern-\wd\pst@fillbox
      \pst@tempa
      \hss}%
    \pst@cntd\pst@cntb
% DG modification begin - Dec. 11, 1997 - Patch 2
    \ifx\PstTiling\@undefined
      \ifnum\psk@fillcycle=\z@\pst@ManualFillCycle\fi
    \else
      \ifnum\psk@fillcyclex=\z@\pst@ManualFillCycle\fi
    \fi
% DG modification end
    \global\setbox\pst@boxg=\vbox to\z@{%
      \offinterlineskip
      \vss
      \pst@tempa
      \vskip\pst@dimb}%
  \endgroup
  \setbox\pst@fillbox\box\pst@boxg
  \pst@rotate\psk@boxfillangle\pst@fillbox
  \box\pst@fillbox}

\def\pst@ManualFillCycle{%
% DG modification begin - Dec. 11, 1997 - Patch 2
  \ifx\PstTiling\@undefined
    \pst@cntg=\psk@fillcycle
  \else
    \pst@cntg=\psk@fillcyclex
  \fi
% DG modification end
  \pst@dimg=\wd\pst@fillbox
% DG modification begin - Mar. 20, 1997 - Patch 1 (to avoid division by 0)
%  \divide\pst@dimg\pst@cntg
  \ifnum\pst@cntg=\z@
  \else
  \divide\pst@dimg\pst@cntg
  \fi
% DG modification end
  \ifnum\pst@cntg<\z@\pst@cntg=-\pst@cntg\fi
  \advance\pst@cntg\m@ne
  \pst@cnth=\pst@cntg
  \def\pst@tempg{%
    \ifnum\pst@cnth<\pst@cntg\advance\pst@cnth\@ne\else\pst@cnth\z@\fi
    \moveright\pst@cnth\pst@dimg}}

% Auto box fill:        !! Fix dictionary

% DG addition begin - Apr. 8, 1997 and Dec. 1997 - Patch 2
\ifx\PstTiling\@undefined
% DG addition end
% Original version
\pst@def{AutoFillCycle}<%
  /c ED
  /n 0 def
  /s {
    /x x w c div n mul add def
    /n n c abs 1 sub lt { n 1 add } { 0 } ifelse def
  } def>

\pst@def{BoxFill}<%
  gsave
    gsave \tx@STV CM grestore dtransform CM idtransform
    abs /h ED abs /w ED
    pathbbox
    h div round 2 add cvi /y2 ED
    w div round 2 add cvi /x2 ED
    h div round 2 sub cvi /y1 ED
    w div round 2 sub cvi /x1 ED
    /y2 y2 y1 sub def
    /x2 x2 x1 sub def
    CP
    y1 h mul sub neg /y1 ED
    x1 w mul sub neg /x1 ED
    clip
    y2 {
      /x x1 def
      s
      x2 {
        save CP x y1 T moveto Box restore
        /x x w add def
      } repeat
      /y1 y1 h add def
    } repeat
    % Next line not useful... To see that, suppress clipping (DG)
    CP x y1 T moveto Box
  currentpoint currentfont grestore setfont moveto>
\else
% DG modification begin - Apr. 8, 1997 and Nov. / Dec. 1997 - Patch 2
\pst@def{AutoFillCycleX}<%
  /cX ED
  /nX 0 def
  /CycleX {
    /x x w cX div nX mul add def
    /nX nX cX abs 1 sub lt { nX 1 add } { 0 } ifelse def
  } def>
\pst@def{AutoFillCycleY}<%
  /cY ED
  /mY 0 def
  /nY 0 def
  /CycleY {
    /y1 y1 h cY div mY mul sub def
    nY cY abs 1 sub lt { /nY nY 1 add def /mY 1 def }
                       { /nY 0 def        /mY cY abs 1 sub neg def } ifelse
  } def>

\pst@def{BoxFill}<%
  gsave
    gsave \tx@STV CM grestore dtransform CM idtransform
    abs /h ED abs /w ED
    pathbbox
    h div round 2 add cvi /y2 ED
    w div round 2 add cvi /x2 ED
    h div round 2 sub cvi /y1 ED
    w div round 2 sub cvi /x1 ED
% We must enlarge the area if fillangle, fillcycle, fillmove or fillsep are used
    /CoefLoopX 0 def
    /CoefLoopY 0 def
    /CoefMoveX 0 def
    /CoefMoveY 0 def
    \psk@boxfillangle 0 ne {/CoefLoopX 8 def /CoefLoopY 8 def} if
    \psk@fillcyclex 0 ne {/CoefLoopX CoefLoopX 1 add def} if
    \psk@fillcycley 0 ne {/CoefLoopY CoefLoopY 1 add def} if
    \psk@fillmovex 0 ne
      {/CoefLoopX CoefLoopX 2 add def
       \psk@fillmovex 0 gt {/CoefMoveX CoefLoopX def}
                           {/CoefMoveX CoefLoopX neg def} ifelse} if
    \psk@fillmovey 0 ne
      {/CoefLoopY CoefLoopY 2 add def
       \psk@fillmovey 0 gt {/CoefMoveY CoefLoopY def}
                           {/CoefMoveY CoefLoopY neg def} ifelse} if
    \psk@fillsepx 0 ne {/CoefLoopX CoefLoopX 1 add def} if
    \psk@fillsepy 0 ne {/CoefLoopY CoefLoopY 1 add def} if
    /CoefLoopX CoefLoopX \psk@fillloopaddx add def
    /CoefLoopY CoefLoopY \psk@fillloopaddy add def
%
    /x2 x2 x1 sub 4 sub CoefLoopX 2 mul add def
    /y2 y2 y1 sub 4 sub CoefLoopY 2 mul add def
% We must fix the origin of tiling, as it must not vary according other stuff
% in the page!
    w x1 CoefLoopX add CoefMoveX add mul
      h y1 y2 add 1 sub CoefLoopY sub CoefMoveY sub mul moveto
%
    CP
    y1 h mul sub neg /y1 ED
    x1 w mul sub neg /x1 ED
    \psk@PstDebug 0 eq {clip} if
    \psk@fillmovex \psk@fillmovey
    gsave \tx@STV CM grestore dtransform CM idtransform
    /hmove ED /wmove ED
%
    /row 0 def
   y2 {
       /row row 1 add def
       /column 0 def
       /x x1 def
       CycleX
       save
       x2 {
          /column column 1 add def
          CycleY
          save CP x y1 T moveto Box restore
          /x x w add def
          0 hmove translate
          } repeat
       restore
       /y1 y1 h add def
       wmove 0 translate
       } repeat
  currentpoint currentfont grestore setfont moveto>
\fi
% DG modification end

\def\pst@AutoBoxFill{%
  \leavevmode
  \begingroup
% DG addition begin - Dec. 2, 1997 - Patch 2
    \pst@stroke
% DG addition end
    \pst@FlushCode
    \pst@Verb{\psk@boxfillangle \tx@RotBegin}%
    \pstVerb{\pst@dict /Box \pslbrace end}%
% DG addition begin - Apr. 8, 1997 and Nov. 5, 1997 - Patch 2
% Useful when the starting point is not (0,0)
    \ifx\PstTiling\@undefined
    \else
      \ifx\pst@tempa\@undefined % Undefined for instance for \pscharpath
      \else
        \def\pst@temph{0}%
        \ifx\pst@tempa\pst@temph
        \else
          \pstVerb{/TR{pop pop currentpoint translate \pst@tempa translate}def}%
        \fi
      \fi
    \fi
% DG addition end
    \hbox to \z@{\vbox to\z@{\vss\copy\pst@fillbox\vskip-\dp\pst@fillbox}\hss}%
% DG addition begin - Dec. 8, 1997 - Patch 2
    \ifx\PstTiling\@undefined
% DG addition end
      \pstVerb{%
        tx@Dict begin \psrbrace def
        \ifnum\psk@fillcycle=\z@
          /s {} def
        \else
          \psk@fillcycle \tx@AutoFillCycle
        \fi
        \pst@number{\wd\pst@fillbox}%
        \psk@fillsepx add
        \pst@number{\ht\pst@fillbox}%
        \pst@number{\dp\pst@fillbox}%
        \psk@fillsepy add add
        \tx@BoxFill
        end}%
% DG modification begin - Dec. 8, 1997 - Patch 2
      \else
      \pstVerb{%
        tx@Dict begin \psrbrace def
        \ifnum\psk@fillcyclex=\z@
          /CycleX {} def
        \else
          \psk@fillcyclex \tx@AutoFillCycleX
        \fi
        \ifnum\psk@fillcycley=\z@
          /CycleY {} def
        \else
          \psk@fillcycley \tx@AutoFillCycleY
        \fi
        \pst@number{\wd\pst@fillbox}%
        \psk@fillsepx add
        \pst@number{\ht\pst@fillbox}%
        \pst@number{\dp\pst@fillbox}%
        \psk@fillsepy add add
        \tx@BoxFill
        end}%
      \fi
% DG modification end
    \pst@Verb{\tx@RotEnd}%
  \endgroup}

\catcode`\@=\TheAtCode\relax

\endinput
%%
%% END pst-fill.tex
