% \iffalse meta-comment
%
% Copyright (C) 1994-2024 by Pieter van Oostrum <pieter@vanoostrum.org>
% -------------------------------------------------------
%
% This file may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either version 1.3
% of this license or (at your option) any later version.
% The latest version of this license is in:
%
%    http://www.latex-project.org/lppl.txt
%
% and version 1.3 or later is part of all distributions of LaTeX
% version 2005/12/01 or later.
%
% \fi
%
% \iffalse
%<*driver>
\ProvidesFile{\jobname.dtx}
%</driver>
%
%    \begin{macrocode}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\NeedsTeXFormat{LaTeX2e}
%<fancyhdr>\ProvidesPackage{fancyhdr}%
%<fancyheadings>\ProvidesPackage{fancyheadings}
%<extramarks>\ProvidesPackage{extramarks}
%<fancyhdr|extramarks>           [2024/12/09 v4.5
%<fancyhdr>                  Extensive control of page headers and footers]%
%<fancyheadings>           [2022/11/09 v4.1
%<fancyheadings>                  Legacy package to call fancyhdr]
%<extramarks>                  Extra marks for LaTeX]
%<fancyhdr|extramarks>% Copyright (C) 1994-2024 by Pieter van Oostrum <pieter@vanoostrum.org>
%<fancyheadings>% Public domain
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%    \end{macrocode}
%
%<*driver>
\documentclass[a4paper]{ltxdoc}
\usepackage{multicol}
\usepackage{float}
\usepackage{makeidx}
\usepackage{layout}
\usepackage{array}
\usepackage{booktabs}
\usepackage{boxedminipage}
\usepackage{fourier-orns}
\usepackage[T1]{fontenc}
\usepackage[fit]{truncate}
\usepackage[hyphens]{url}
\usepackage[colorlinks,linktocpage]{hyperref}
\usepackage{ifthen}
\usepackage{fancyhdr}
\GetFileInfo{fancyhdr.sty}
\def\latex/{\protect\LaTeX{}}
\def\tex/{\TeX}
\def\ams/{\protect\pAmS}
\def\pAmS{{\the\textfont2
        A\kern-.1667em\lower.5ex\hbox{M}\kern-.125emS}}
\def\amslatex/{\ams/-\latex/}
\newcommand{\bs}{\symbol{'134}}
\newcommand{\env}[1]{\texttt{#1}}
\newcommand{\Package}[1]{\textsf{#1}}
\renewcommand{\partname}{Part}
\DisableCrossrefs
\CodelineIndex
\RecordChanges
\newcommand\bsbs{\cs{\char`\\}}
\newcommand{\Cmd}[1]{\texttt{\def\{{\char`\{}\def\}{\char`\}}\bs#1}}
\newcommand{\CmdIndex}[1]{\index{#1=\string\texttt{\bs#1}}}
\newcommand{\TTindex}[1]{\index{#1=\string\texttt{#1}}}
\newcommand{\PSindex}[1]{\index{page style>#1=\string\texttt{#1}}}
\newcommand{\OPTindex}[1]{\index{option>#1=\string\texttt{#1}}}
\renewcommand{\topfraction}{0.9}
\renewcommand{\bottomfraction}{0.9}
\renewcommand{\textfraction}{0.05}
\setlength{\emergencystretch}{4em}
\addtolength{\textheight}{-0.5in} % make it print better on US letter paper
\setlength\IndexMin{4cm}
\makeatletter
\renewcommand\l@section      {\@dottedtocline{1}{1.5em}{2.3em}}
\makeatother
\newenvironment{block}{\vspace{8pt}\noindent\begin{minipage}{\textwidth}}{\end{minipage}\vspace{8pt}}
\newenvironment{fblock}{\vspace{8pt}\noindent\begin{boxedminipage}{\textwidth}}{\end{boxedminipage}\vspace{8pt}}
\newcommand{\showrule}{\\[-1.5ex]\noindent\makebox[\textwidth]{\hrulefill}\\[\baselineskip]}
\newenvironment{xvspace}{\vspace{1ex}}{{\vspace{1ex}}}
\setcounter{tocdepth}{1}

% Compare section numbers in references
\usepackage{refcount}
\newcounter{secnum}
% #1=current section label #2=ref section label
\newcommand{\smartref}[2]{%
  \setcounterref{secnum}{#1}%
  \addtocounter{secnum}{-1}%
  \ifnum\value{secnum}=\getrefnumber{#2}
    the previous section%
  \else
    \addtocounter{secnum}{2}%
    \ifnum\value{secnum}=\getrefnumber{#2}
      the next section%
    \else
      section~\ref{#2}%
    \fi
  \fi
}

% Our own page style:
\pagestyle{fancy}
\addtolength{\headwidth}{\marginparsep}
\addtolength{\headwidth}{0.5\marginparwidth}
\fancyhf{}
\fancyhead[L]{\rightmark}
\fancyhead[R]{\textbf{\thepage}}
\renewcommand{\sectionmark}[1]{\markright{\thesection\quad#1}}

% Page style for demonstrating struts, \headruleskip and \footruleskip.

\newcommand{\strutheader}{%
  \texttt{\textbackslash strut}:
  \rule[-0.3\normalbaselineskip]{10pt}{0.3\normalbaselineskip}%
  \rule{10pt}{0.7\normalbaselineskip}
  \texttt{\textbackslash headruleskip}$\searrow$
  \raisebox{-0.3\normalbaselineskip}[0pt][0pt]%
    {\ifdim \headruleskip>0pt
      \rule[-\headruleskip]{10pt}{\headruleskip}
      \else
      \rule{10pt}{-\headruleskip}
     \fi}
}
\newcommand{\strutfooter}{%
  \raisebox{0pt}[0pt][0pt]{%
    \texttt{\textbackslash strut}:
    \rule[-0.3\normalbaselineskip]{10pt}{0.3\normalbaselineskip}%
    \rule{10pt}{0.7\normalbaselineskip}
    \texttt{\textbackslash footruleskip} $\nearrow$
    \rule[0.7\normalbaselineskip]{10pt}{\footruleskip}}%
}
\fancypagestyle{showstruts}{%
  \fancyhead[L]{%
    \ifthenelse{\value{page}=\getpagerefnumber{showstruts}}%
      {\strutheader}%
      {\rightmark}%
  }
  \fancyfoot[L]{%
    \ifthenelse{\value{page}=\getpagerefnumber{showstruts}}%
      {\strutfooter}%
      {}%
  }
  \fancyheadinit{%
    \ifthenelse{\value{page}=\getpagerefnumber{showstruts}}%
      {\renewcommand{\headruleskip}{4pt}}%
      {\renewcommand{\headruleskip}{0pt}}%
  }
  \fancyfootinit{%
    \ifthenelse{\value{page}=\getpagerefnumber{showstruts}}%
      {\renewcommand{\footrulewidth}{0.4pt}}%
      {\renewcommand{\footrulewidth}{0pt}}%
  }
}
% Change \MacroFont to have verbatim in normal size
\renewcommand{\MacroFont}%
  {\fontencoding\encodingdefault
    \fontfamily\ttdefault
    \fontseries\mddefault
    \fontshape\shapedefault
    \normalsize}

\newcounter{example}
\newcommand{\Example}{%
  \refstepcounter{example}%
  \marginpar{\vspace{\baselineskip}\hfill Example \theexample\quad\quad}%
}
\newcommand{\FExample}{%
  \refstepcounter{example}%
  \makebox[0pt][r]{{Example \theexample}\quad\quad}%
}

\begin{document}
  \DeleteShortVerb{\|}
  \DocInput{\jobname.dtx}
\end{document}
%</driver>
% \fi
%
% \CheckSum{0}
%
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
% \DoNotIndex{\#,\$,\%,\&,\@,\\,\{,\},\^,\_,\~,\ }
% \DoNotIndex{\@ne}
% \DoNotIndex{\advance,\begingroup,\catcode,\closein}
% \DoNotIndex{\closeout,\day,\def,\edef,\else,\empty,\@empty,\endgroup}
% \ProvideDocElement[printtype=\textit{hook},idxtype=hook,idxgroup=Hooks]{Hook}{hookdecl}%
% \newcommand\makedate{}
% \def\makedate#1/#2/#3/{%
%   \date{%
%     \ifcase #2\or
%     Jan\or Feb\or March\or Apr\or May\or June\or
%     July\or Aug\or Sept\or Oct\or Nov\or Dec\fi~\number #3,
%     #1}%
% }
% \expandafter\makedate\filedate/
%
% \title{The \Package{fancyhdr} and \Package{extramarks}
% packages\\{\normalsize version \fileversion.}}
% \author{Pieter van Oostrum\thanks{A considerable part of this documentation was
%     written by  George
%     Gr\"atzer (University of Manitoba) in \emph{Notices Amer. Math. Soc.}
%     Thanks, George!}\\
%     Dept.\ of Computer Science\thanks{This was my employer at the time I developed this package.
% I am now retired.}\\
%   Utrecht University}
%
% \maketitle
% \begin{abstract}
%   This document describes how to customize the page layout of your LaTeX
%   documents, i.e how to change page margings and sizes,
%   headers and footers, and the
%   proper placement of figures and tables (collectively called floats) on
%   the page.
%
%   This documentation describes version 4.0 or later of the
% \Package{fancyhdr} and \Package{extramarks} packages. The user
% documentation is valid for the versions 4.0 or later of the
% \Package{fancyhdr} package (except for the changes mentioned in
% section~\ref{sec:version-4}), and version 2.1 or later of the
% \Package{extramarks} package.
%
% \end{abstract}
%
% \tableofcontents
% \markright{Contents}
%
%\part{Introduction}
%
% This document contains four parts:
%
% Part I is a short documentation on
% the user commands of the \Package{fancyhdr} and \Package{extramarks} packages.
%
% Part II contains elaborate documentation on page layout in \latex/.
% This used to be the complete documentation of \Package{fancyhdr} and
% \Package{extramarks} for several years.
%
% Part III contains Questions and Answers.
%
% Part IV contains the annotated implementation.
%
% This document describes version 4 of \Package{fancyhdr}, which is described in
% the \emph{The \LaTeX{} Companion, Third Edition}.
% The differences between this version and previous versions
% are summarized in section~\ref{sec:version-4} on
% page~\pageref{sec:version-4}.
% Throughout this documentation it is mentioned when a specific feature
% is only available in version 4, or when there are differences between
% version 3 and 4.
%
% \section{Installation}
% \label{sec:installation}
%
% The preferred way to install this package is with a package installer.
% If you want to install it by hand, then first run the command
% \verb+tex fancyhdr.ins+ and then move the files \texttt{fancyhdr.sty},
% \texttt{extramarks.sty} and \texttt{fancyheadings.sty} to a place
% where \latex/ can find it, preferably in a directory similar to
% \texttt{.../texmf/tex/latex/fancyhdr/} in your \tex/ directory tree.
%
% \section{Using \Package{fancyhdr}}
%
% The package \Package{fancyhdr} gives you several commands to define
% headers and footers of the pages in a \latex/ document.
% You load the package with the following command in the preamble:
% \begin{quote}
% \verb|\usepackage|\oarg{options}\verb|{fancyhdr}|
% \end{quote}
% (Options are available since version~4.0)
% The following options are supported:
% \begin{center}
% \begin{tabular}{ l l }
% \toprule
% Option & Meaning \\
% \midrule
% \texttt{nocheck} & do not check the heights of the header and footer \\
%                  & (see section~\ref{sec:warning} on page~\pageref{page:warning})\\
% \texttt{compatV3} & keep some behaviour (now considered undesirable) as in version~3 \\
%          & (see section~\ref{sec:options} and section~\ref{sec:warning} on
%                                              page~\pageref{page:warning}) \\
% \texttt{twoside} & use two-sided headers and footers even in one-sided documents \\
%          & for \Package{fancyhdr}-based pagestyles (version 4.1 or later) \\
% \texttt{headings} & redefine the \texttt{headings} page style to be fancy-based \\
% \texttt{myheadings} & redefine the \texttt{myheadings} page style to be fancy-based \\
% \bottomrule
% \end{tabular}
% \end{center}
% \OPTindex{nocheck}
% \OPTindex{compatV3}
% \OPTindex{twoside}
% \OPTindex{headings}
% \OPTindex{myheadings}
%
% \begin{flushleft}
%   \DescribeMacro{\fancyhead}\cmd{\fancyhead}\oarg{places}\marg{field} \\
%   \DescribeMacro{\fancyfoot}\cmd{\fancyfoot}\oarg{places}\marg{field} \\
%   \DescribeMacro{\fancyhf}\cmd{\fancyhf}\oarg{places}\marg{field}
% \end{flushleft}
% Here \meta{places} is a comma-separated list of places where
% \meta{field} will be placed. There are 12 places defined: Left,
% Center and Right Headers and Footers, and both can be on Even or Odd
% pages. Each place therefore has 3 coordinates which are the inital
% letters of the above description: (1) \texttt{E} or \texttt{O}, (2) \texttt{L}, \texttt{C} or
% \texttt{R}, (3) \texttt{H} or \texttt{F}. So a place is given with 3
% letters, like \texttt{EOH}. A missing coordinate means: all
% possibilities, except for \cs{fancyhead} where \texttt{H} is implied
% and \cs{fancyfoot} where \texttt{F} is implied.
%
% \begin{flushleft}
%   \DescribeMacro{\fancyheadoffset}\cmd{\fancyheadoffset}\oarg{places}\marg{length} \\
%   \DescribeMacro{\fancyfootoffset}\cmd{\fancyfootoffset}\oarg{places}\marg{length} \\
%   \DescribeMacro{\fancyhfoffset}\cmd{\fancyhfoffset}\oarg{places}\marg{length}
% \end{flushleft}
% These define offsets to let the headers stick into the margin (or to
% the inside if negative). Places cannot contain the \texttt{C}
% specifier. See section~\ref{sec:book-examples} for more details.
%
% \DescribeMacro{\headrulewidth}
% \DescribeMacro{\footrulewidth}
% \DescribeMacro{\headruleskip}
% \DescribeMacro{\footruleskip}
% \DescribeMacro{\headrule}
% \DescribeMacro{\footrule}
% \DescribeMacro{\headwidth}
% \cs{headrulewidth} and \cs{footrulewidth} are macros to define the
% thickness of a line under the header and above the footer.
% \cs{headruleskip} and \cs{footruleskip} are macros that define the
% distance between the lines and the header and footer text,
% respectively. (But \cs{headruleskip} is only available since version~4.0.)
% \cs{headrule} and \cs{footrule} are macros to completely redefine
% these lines. And \cs{headwidth} is a length parameter that defines the
% total width of the headers and footers. See section~\ref{sec:book-examples} for more details.
%
% \DescribeMacro{\fancyheadinit}
% \DescribeMacro{\fancyfootinit}
% \DescribeMacro{\fancyhfinit}
% \cs{fancyheadinit} and \cs{fancyfootinit} can be used to define
% initialisation code for the header and footer, respectively, and
% \cs{fancyhfinit} defines both of these. These commands are only
% available in \Package{fancyhdr} version~4.0 and later. See section~\ref{sec:change}.
%
% \DescribeMacro{\fancycenter}
% (Only in version~4.0 and later.) The command \cs{fancycenter} packs 3
% header fields into a full-width header. See section~\ref{sec:fancycenter}.
%
% \DescribeMacro{\iftopfloat}
% \DescribeMacro{\ifbotfloat}
% \DescribeMacro{\iffloatpage}
% \DescribeMacro{\iffootnote}
% The macros \cs{iftopfloat}, \cs{ifbotfloat}, \cs{iffloatpage} and
% \cs{iffootnote} are used to detect if there is a float on the top or
% the bottom of the page, or the page is a float page, or if there is
% a footnote at the bottom of the page. These can be used to choose
% different headers and/or footers if these conditions are met. See
% section~\ref{sec:float} for more details.
%
% \begin{flushleft}
%   \DescribeMacro{\fancypagestyle}
%   \cmd{\fancypagestyle}\marg{style-name}\oarg{base-style}\marg{definitions}
% \end{flushleft}
% This command lets you (re)define page styles for use in special
% situations. See section~\ref{sec:fancypagestyle} for more details.
%
% \section{Using \Package{extramarks}}
% \label{sec:using-extramarks}
%
% The \Package{extramarks} gives you some extra marks in \latex/,
% besides the normal \cs{leftmark} and \cs{rightmark}, that are defined
% by the \cs{markboth} and \cs{markright} commands.
%
% \DescribeMacro{\firstleftmark}
% \DescribeMacro{\lastrightmark}
% \DescribeMacro{\firstrightmark}
% \DescribeMacro{\lastleftmark}
% Standard \latex/ has two marks: a left and a right one. The standard
% command \cs{leftmark} gives you the last left mark on a page, and
% \cs{rightmark} gives you the first right one. These macros give you
% also the other combinations, where \cs{firstrightmark} =
% \cs{rightmark} and \cs{lastleftmark} = \cs{leftmark}. As with the
% standard marks, these are meant to be used in headers and footers. In
% other places they will not work properly.
% \begin{verbatim}
% \extramarks{aa}{bb}
% \firstleftxmark
% \firstrightxmark
% \topleftxmark
% \toprightxmark
% \lastleftxmark
% \lastrightxmark
% \firstxmark
% \lastxmark
% \topxmark
% \end{verbatim}
% The command \Cmd{extramarks\{aa\}\{bb\}} defines two extra marks,
% similar to the standard ones by \latex/, where \texttt{aa} is the left
% one and \texttt{bb} is the right one. The other commands are to
% extract these in the headers and footers, similar to the ones without
% the \texttt{x}. See sections~\ref{sec:scoop} and \ref{sec:xmarks} for more details.
%
% \newpage
% \part{Page Layout in \LaTeX}
%
% \section{Introduction}
% \label{sec:intro}
%
% A page in a \LaTeX{} document is built from various elements as shown in
% figure \ref{fig:layout}.
% \begin{figure}[htbp]
%   \begin{center}
%     \leavevmode
%     \layout
%     \vspace{1.5cm}
%     \caption{Page elements. The values shown are those in effect in the current document, not the defaults.}
%     \label{fig:layout}
%   \end{center}
% \end{figure}
% \thispagestyle{plain}
% The body contains the main text of the document
% together with the so called floats (tables and figures).
%
% The pages are constructed by \LaTeX's output routine, which is quite
% complicated and should therefore not be modified. Some of the packages
% described in this paper contains small modifications to the output routine
% to accomplish things that cannot be done in another way. You should use
% these packages to get the desired result rather than fiddling with the
% output routine yourself.
%
% There are a number of things that you must be aware of:
% \begin{enumerate}
% \item The margins on the left are not called \cs{leftmargin}, but
%   \cs{evensidemargin} (on even-numbered pages) and \cs{oddsidemargin}
%   (on odd-numbered pages). In one-sided documents
%   \cs{oddsidemargin} is used for either.  \cs{leftmargin} is also a valid
%   \latex/ parameter but it has a different use (namely the indentation of
%   lists).
% \item Most of the parameters should not be changed in the middle of a
%   document. Some changes might work at a pagebreak. If you want to change
%   the height of a single page, you can use the \cs{enlargethispage}
%   command.
% \end{enumerate}
%
% The margin notes
% area contains small pieces of information created by the \cs{marginpar}
% command. On two-sided documents the margin notes appear on the left and right
% alternatively. The margin notes are not on fixed places with respect to the
% paper but at approximately the same height as the paragraph in which they
% appear. Due to the algorithm used to decide the placement of margin notes,
% in a two-sided document unfortunately
% they may appear on the wrong side if they are close
% to a page break.
% If you want to put information on fixed places in the margins you may use
% the technique described in sections \ref{sec:movie} and \ref{sec:thumb}.
%
% The first part of this paper describes how to change the header and footer
% areas. The last part describes how to get your floats at the desired place.
%
% \section{Page headers and footers}
%
% The page headers and footers in \LaTeX{} are defined by the
% \cs{pagestyle} and \cs{pagenumbering} commands. \cs{pagestyle}
% defines the general contents of the headers and footers (e.g.\ where the
% page number will be printed), while
% \cs{pagenumbering} defines the format of the page number.
% \LaTeX{} has four standard page styles:
%
% \begin{center}
% \noindent
%   \begin{tabular}{>{\tt}lp{9cm}}
%   \toprule
%     empty & no headers or footers \\
%     plain & no header, footer contains page number centered \\
%     headings & no footer, header contains name of chapter/section and/or
%     subsection and page number \\
%     myheadings & no footer, header contains page number and user
%     supplied information \\
%     \bottomrule
% \end{tabular}
% \end{center}
%
% Although these are useful styles, they are quite limited. Additional page
% styles can be defined by defining commands of the form \cs{ps@xxx}. This
% command is executed when a \Cmd{pagestyle\{xxx\}} is given in the document.
% The  \cs{ps@xxx} command should define the following
% commands for the contents of the headers and footers:
%
% \begin{center}
%   \noindent
%   \begin{tabular}{lp{9cm}}
%   \toprule
% \cs{@oddhead} & header on odd numbered pages in two-sided documents
% (on all pages in one-sided) \\
% \cs{@evenhead} & header on even numbered pages in two-sided documents \\
% \cs{@oddfoot} & footer on odd numbered pages in two-sided documents
% (on all pages in one-sided) \\
% \cs{@evenfoot} & footer on even numbered pages in two-sided documents \\
% \bottomrule
% \end{tabular}
% \end{center}
%
% These are not user commands, but rather ``variables'' that are used by
% \latex/'s output routine.
% As the command names contain the character `\texttt{@}', they should
% be defined in a package file, or otherwise be sandwiched between the commands
% \cs{makeatletter} and \cs{makeatother}.
%
% The \cs{pagenumbering} command defines the layout of the page number. It
% has a parameter from the following list:
%
% \begin{center}
%   \begin{tabular}{>{\tt}ll}
%   \toprule
% arabic & arabic numerals \\
% roman & lower case roman numerals \\
% Roman & upper case roman numerals \\
% alph & lower case letter \\
% Alph & upper case letter \\
% \bottomrule
% \end{tabular}
% \end{center}
%
% The  \Cmd{pagenumbering\{xxx\}} defines the command \cs{thepage} to be the
% expansion of the page number in the given notation \texttt{xxx}.
% The pagestyle command
% then would include \cs{thepage} in the appropriate place. Additionally
% the  \cs{pagenumbering} command resets the page number to~1.
% The  \cs{pagestyle} and  \cs{pagenumbering} apply to the page that is
% being constructed, so they should be used at a location where it is clear
% to what page they apply (see section \ref{sec:change}).
%
%
% \section{What is \Package{fancyhdr}}
%
% The \Package{fancyhdr} macro package allows you to customize
% in \latex/ your page headers and footers in an easy way.  You can
% define:
% \begin{itemize}
% \item three-part headers and footers
% \item decorative lines in headers and footers
% \item headers and footers wider than the width of the text
% \item multi-line headers and footers
% \item separate headers and footers for even and odd pages
% \item different headers and footers for chapter pages
% \item different headers and footer on pages with floats
% \end{itemize}
%
% Of course, you also have complete control over fonts, uppercase
% and lowercase displays, etc.
%
% \section{Simple use of \Package{fancyhdr}}  To use this package
% install it in a place where \latex/ can find it (see
% section~\ref{sec:installation})\footnote{In most modern \tex/
% installation the package is already included.}, and include in the preamble of your document
% the commands:
%
% \PSindex{fancy}
% \begin{verbatim}
% \usepackage{fancyhdr}
% \pagestyle{fancy}
% \end{verbatim}
%
% We can visualize the page layout we can create with \Package{fancyhdr}
% as follows:
%
% \begin{fblock}
% \noindent\makebox[\textwidth]{LeftHeader\hfill
% CenteredHeader\hfill RightHeader}\showrule
% \noindent\makebox[\textwidth]{\hfill page body\hfill}\\[\baselineskip]
% \noindent\makebox[\textwidth]{\hrulefill}
% \noindent\makebox[\textwidth]{LeftFooter\hfill
% CenteredFooter\hfill RightFooter}
% \end{fblock}
%
% The LeftHeader and LeftFooter are left justified; the
% CenteredHeader and CenteredFooter are centered; the
% RightHeader and RightFooter are right justified.
%
% We define each of the six ``fields'' and the two decorative lines
% separately.
%
% \begin{fblock}
%   \textbf{NOTE:} In \Package{fancyhdr} version 4.3 and later, paragraph
% hooks will not work inside \Package{fancyhdr} headers and footers to
% avoid unwanted interactions with the main text.
% \end{fblock}
%
% \section{A simple example}
% \label{sec:simple}
%
% K. Grant is writing a report to Dean
% A. Smith, on ``The performance of new graduates'' with the
% following page layout:
%
% \begin{fblock}
% \noindent\makebox[\textwidth]{\hfill\textbf{The performance of new
% graduates}}\showrule
% \noindent\makebox[\textwidth]{\hfill page body\hfill}\\[\baselineskip]
% \noindent\makebox[\textwidth]{\rule{\textwidth}{2pt}}
% \noindent\makebox[\textwidth]{From: K. Grant\phantom{3}\hfill
% To: Dean A. Smith\hfill \phantom{From: K. Grant}3}
% \end{fblock}
%
% \noindent where ``3'' is the page number.  The title: ``The
% performance of new graduates'' is bold. The rule above the footer is a
% bit thicker (2pt).
%
% This is accomplished by these commands following
% \Cmd{pagestyle\{fancy\}}\footnote{Note that version 1 of fancyheadings
% used the \cs{setlength} command to change the \texttt{\bs...rulewidth} parameters.}:
% \CmdIndex{fancyhead}
% \CmdIndex{fancyfoot}
% \CmdIndex{headrulewidth}
% \CmdIndex{footrulewidth}
% \begin{verbatim}
% \fancyhead[L,C]{}
% \fancyhead[R]{\textbf{The performance of new graduates}}
% \fancyfoot[L]{From: K. Grant}
% \fancyfoot[C]{To: Dean A. Smith}
% \fancyfoot[R]{\thepage}
% \renewcommand{\headrulewidth}{0.4pt}
% \renewcommand{\footrulewidth}{2pt}
% \end{verbatim}
% (The \cs{thepage} macro displays the current page number.
% \cs{textbf} puts its argument in bold face.)
%
% This is now fine, except that the first page does not need
% all these headers and footers.  To eliminate all but the
% centered page number, issue the command
%
% \CmdIndex{thispagestyle}
% \begin{verbatim}
% \thispagestyle{plain}
% \end{verbatim}
% after the
% \Cmd{begin\{document\}}
% and the
% \CmdIndex{maketitle}
% \cs{maketitle}
% commands.
%
% Alternatively, issue
% \begin{verbatim}
% \thispagestyle{empty}
% \end{verbatim}
% if you do not want any headers or footers.
%
% In fact the standard \latex/ classes have the command \cs{maketitle}
% defined in such a way that a \Cmd{thispagestyle\{plain\}} is automatically
% issued. So if you \emph{do} want the fancy layout on a page containing
% \cs{maketitle} you must issue a \Cmd{thispagestyle\{fancy\}} after the
% \cs{maketitle}.
%
% \section{Fancy Centering}
% \label{sec:fancycenter}
%
% \textbf{Note:} This section only applies to \Package{fancyhdr} version~4.0
% and later\footnote{This comes from the \Package{nccfancyhdr}
% package by Alexander I. Rozhenko.}.
%
% The fields in a fancy header and footer are prepared using \cs{parbox}
% command. So, you can use multiline fields. In the header, they are
% aligned to the bottom line, but, in the footer, they are aligned to
% the top line. The maximum width of every field is equal to the
% \cs{headwidth}. This can lead to overlapping of neighbouring fields.
%
% \CmdIndex{fancycenter}
% If you want to prepare headers/footers in more traditional way in a line
% not exceeding the \cs{headwidth}, you can use
% the following command in any header/footer command:
% \begin{quote}
% \cs{fancycenter}\oarg{distance}\oarg{stretch}\\
% \verb|            |\marg{left-field}\marg{center-field}\marg{right-field}
% \end{quote}
% \CmdIndex{fancycenter}
% This command works like
% \begin{center}
% \verb|\hbox to\linewidth{|\marg{left-field}\cs{hfil}\marg{center-field}\cs{hfil}\marg{right-field}\verb|}|
% \end{center}
% but does this more carefully trying to exactly center the central part of
% the text if possible. The solution for exact centering
% is applied if the width of \meta{center-field} is less than
% \begin{quote}
% \verb|\linewidth - 2*(|\meta{stretch}\verb|*|\meta{distance}\verb| +|\\
% \verb|                max(width(|\meta{left-field}\verb|), width(|\meta{right-field}\verb|)))|.
% \end{quote}
% Otherwise the \meta{center-field} will slightly migrate to a shorter item
% (\meta{left-field} or \meta{right-field}), but at least \meta{distance}
% space between all parts of line is provided.
% The default values of \meta{distance} and \meta{stretch}
% are 1em and 3.
%
% If the \meta{center-field} is empty, the \cs{fancycenter} is equivalent to
% the following command:
% \begin{center}
% \verb|\hbox to\linewidth {|\marg{left-field}\verb|\hfil |\marg{right-field}\verb|}|
% \end{center}
%
% You would use this in a header for example with
% \begin{quote}
% \verb|\fancyhead[C]{|\cs{fancycenter}\oarg{distance}\oarg{stretch}\\
% \verb|            |\marg{left-field}\marg{center-field}\marg{right-field}\verb|}|
% \end{quote}
% and leave the \texttt{[L,R]} parts empty.
%
% \textbf{Note 1}:
% When \cs{fancycenter} is used inside a header or
% \CmdIndex{linewidth}%
% \CmdIndex{headwidth}%
% footer, \cs{linewidth} usually is the same as \cs{headwidth}. Only
% when  \cs{fancycenter} is used inside a box with a different width,
% \cs{linewidth} will be the width of that box.
%
% \textbf{Note 2}:
% If the whole of the \cs{fancycenter} is wider than
% \cs{linewidth} it will stick out on the right. See
% section~\ref{sec:longtitles} for possible solutions.
%
% \textbf{Note 3}: The usage of the \cs{fancycenter} command is not limited to the
% argument of headers/footers. You can use it anywhere in your
% document. Then \cs{linewidth} will be the width of the box or text in
% which it is used.
%
% \section{An example of two-sided printing}\label{two-sided}
%
% \TTindex{twoside}
% Some document classes, such as \verb|book.cls|, print two-sided by default: the even
% pages and the odd pages have different layouts; other document classes
% use the \verb|twoside| option to print two-sided.
%
% Now let us print the report two-sided.  Let the above page
% layout be used for the odd (right-side) pages, and the
% following for the even (left-side) pages:
%
% \begin{fblock}
%
% \noindent\makebox[\textwidth]{\textbf{The performance of new
% graduates}\hfill}\showrule
% \noindent\makebox[\textwidth]{\hfill page body\hfill}\\[\baselineskip]
% \noindent\makebox[\textwidth]{\hrulefill}
% \noindent\makebox[\textwidth]{4\phantom{To: Dean A. Smith}\hfill
%  From: K. Grant\hfill \phantom{4}To: Dean A. Smith}
%
% \end{fblock}
% \noindent where ``4'' is the page number.
%
% Here are the commands:
%
% \begin{verbatim}
% \fancyhead{} % clear all header fields
% \fancyhead[RO,LE]{\textbf{The performance of new graduates}}
% \fancyfoot{} % clear all footer fields
% \fancyfoot[LE,RO]{\thepage}
% \fancyfoot[LO,CE]{From: K. Grant}
% \fancyfoot[CO,RE]{To: Dean A. Smith}
% \renewcommand{\headrulewidth}{0.4pt}
% \renewcommand{\footrulewidth}{0.4pt}
% \end{verbatim}
%
% \CmdIndex{fancyhead}
% \CmdIndex{fancyfoot}
% The commands \cs{fancyhead} and \cs{fancyfoot}
% have an additional parameter between square brackets that specifies
% for which pages and/or parts of the header/footer they apply. The first
% \cs{fancyhead} command above omits this parameter, and thus applies to all
% header fields. In general this is only useful to get rid of the defaults or
% a previous definition, as is done here. Similarly the \cs{fancyfoot} command
% without square brackets clears all footer fields. In this particular
% example it could be omitted as all footer fields have a value specified.
% The selectors that can be used
% between the square brackets are given in figure~\ref{fig:sel}. Selectors can be combined so
% \Cmd{fancyhead[LE,RO]\{text\}}
% will define the field for both the left header on even pages and the right
% header on odd pages. If you don't give an \texttt{E} or \texttt{O} the definition applies to
% both. Similar for \texttt{LRC}.
% The selectors may be given as uppercase or lowercase letters.
% \begin{figure}[htb]
%   \begin{center}
%     \leavevmode
%     \begin{tabular}{|l|l|}
%       \hline
%       E & Even page         \\
%       O & Odd page          \\
%       \hline
%       L & Left field        \\
%       C & Center field      \\
%       R & Right field       \\
%       \hline
%       H & Header            \\
%       F & Footer            \\
%       \hline
%     \end{tabular}
%   \end{center}
%   \caption{Selectors}
%   \label{fig:sel}
% \end{figure}
%
% \CmdIndex{fancyhf}
% There is also a more general command \cs{fancyhf} that you can use to
% combine the specifications for headers and footers. This allows additional
% selectors \texttt{H} (header) and \texttt{F} (footer). In fact  \cs{fancyhead} and
% \cs{fancyfoot} are just  \cs{fancyhf} with \texttt{H} and \texttt{F} pre-specified, respectively.
%
% Again, you may
% use  \Cmd{thispagestyle\{plain\}} for a simple page layout for
% page~1.
%
% \section{Redefining page style \texttt{plain}}
% \label{sec:pagestyle-plain}
%
% Some \latex/ commands, like \cs{chapter}, use the \cs{thispagestyle}
% command to automatically switch to the \texttt{plain} page style, thus
% ignoring the page style currently in effect.
%
% They do this by issuing a \verb+\thispagestyle{plain}+ command. The most
% well-known places where this could happen are:
% \begin{itemize}
% \item The first pages of chapters in the \texttt{book} and \texttt{report} class
% \item The first page of a document in the \texttt{article} class when \cs{maketitle} is used
% \item The first page of an index
% \end{itemize}
% but it could happen at other places depending on the class and the packages used.
%
% To customize even such pages you must redefine the \texttt{plain}
% page style. As we indicated before you could do this by defining the
% \cs{ps@plain} command, but \Package{fancyhdr} gives you an easier way
% with the \cs{fancypagestyle} command. This command can be used to
% redefine existing page styles (like \texttt{plain}) or to define new ones,
% e.g.\ if part of your document needs a different page style. This command
% has two mandatory parameters: the first one is the name of the page style to be defined, the
% second consists of commands that change the headers and/or footers, i.e.,
% \verb|\fancyhead| etc. Also allowed are changes to \cs{headrulewidth} and
% \cs{footrulewidth} or even \cs{headrule} and \cs{footrule}.
% The (re)defined page style uses the standard
% \texttt{fancy} definitions, amended by the definitions in the second
% parameter. In other words, those parts that are not redefined in the
% second parameter get their value from the \texttt{fancy} definition that
% is current. In particular, if the second parameter is empty, i.e., given
% as \verb+{}+, then the new page style is equal to page style
% \texttt{fancy}.
%
%  As an example, let us redefine the \texttt{plain} style so that it will
% be the same as page style \texttt{fancy}:
% \begin{verbatim}
% \fancypagestyle{plain}{}
% \end{verbatim}
% Now when these special pages use the \texttt{plain} page style, they use your redefined version.
%
% As another example, let us
% redefine the \texttt{plain} style for the report in Section~\ref{two-sided} by
% making the page number bold and enclosing it in en-dashes without any rules.
% \PSindex{plain}
%
% \begin{verbatim}
% \fancypagestyle{plain}{%
%   \fancyhf{}% clear all header and footer fields
%   \fancyfoot[C]{\textbf{--~\thepage~--}} % except the center
%   \renewcommand{\headrulewidth}{0pt}%
%   \renewcommand{\footrulewidth}{0pt}%
% }
% \end{verbatim}
%
%
% \section{Defining other page styles}
% \label{sec:fancypagestyle}
%
% Just like redefining the \texttt{plain} page style in the previous
% section, you can define or redefine other page styles based on page
% style \texttt{fancy}. This is also done with the \cs{fancypagestyle}
% command. The general form of this command is:
% \begin{quote}
% \CmdIndex{fancypagestyle}
% \verb|\fancypagestyle|\marg{style-name}\oarg{base-style}\marg{definitions}
% \end{quote}
% As you see, there is an optional argument between the two mandatory arguments.
%
% For example:
% \begin{verbatim}
% \fancypagestyle{toc}{%
%   \fancyhf{}%
%   \fancyhead[RO]{\thepage}%
%   \fancyhead[RO]{\textsl{TABLE OF CONTENTS}}%
%   \fancyfoot[C]{\thepage}
% }
% \end{verbatim}
% This defines a special page style \texttt{toc} for use in the table
% of contents with \Cmd{pagestyle\{toc\}}.
% Inside the definition you can define the headers and/or footers,
% change the header and footer rules, and redefine commands like
% \cs{chaptermark} (see section~\ref{sec:options} for an example). The
% headers and footers and marks that are not redefined inside the
% \cs{fancypagestyle} definition, are taken from the global page style
% \texttt{fancy} values.
%
% You can also give an optional base page style to the
% \cs{fancypagestyle} command. Then the new page style will be based on
% the base style. This base style must be a \texttt{fancyhdr}-defined
% style. Also you should take care not to
% create circular dependencies. In this case the order of picking up the
% definitions (headers, footers, marks) is:
% \begin{enumerate}
% \item The definitions from the base style are taken.
% \item The definitions given in the \cs{fancypagestyle} command
% override and/or augment these.
% \item Any definitions that are not given by the two above, are taken
% from the environment at the time the new page style is used.
% \end{enumerate}
% Only the first two parts are embedded in the page style.
% When no base style is given, part 1 is null.
%
% The optional base style argument is only available since version~4.0. In
% this version it is also possible to redefine page style \texttt{fancy}
% in this way. In version~3.x and earlier this was not possible.
%
% If you want to restore the original default definitions
% from page style \texttt{fancy}  as described in section~\ref{sec:default}, you can use
% \begin{verbatim}
% \fancypagestyle{myfancy}[fancydefault]{
%   . . . override some here
% }
% \end{verbatim}
% \PSindex{fancydefault}
% Page style \texttt{fancydefault} is the version of page style
% \texttt{fancy} that has all the initialisation embedded. Contrary to
% this, page style \texttt{fancy} as defined in the package uses the
% same defaults, but doesn't have them embedded. It picks them up from
% the environment. So if the environment changes, because you redefine
% headers, footers, mark commands, etc, the functioning of page style
% \texttt{fancy} changes with it. The page style \texttt{fancydefault}
% does not change, however. However, \texttt{fancydefault} is only available
% since fancyhdr version~4.0.
%
% \section{Package options}
% \label{sec:options}
%
% \textbf{NOTE:} This section applies to fancyhdr version~4.0 and later.
%
% You can supply options to the \cs{usepackage} command:
% \begin{quote}
% \verb|\usepackage|\oarg{options}\verb|{fancyhdr}|
% \end{quote}
% % The following options are supported:
% \begin{center}
% \OPTindex{nocheck}\OPTindex{compatV3}\OPTindex{twoside}\OPTindex{headings}\OPTindex{myheadings}
% \begin{tabular}{ l l }
% \toprule
% Option & Meaning \\
% \midrule
% \texttt{nocheck} & do not check the heights of the header and footer \\
% \texttt{compatV3} & keep some behaviour (now considered undesirable) as in version~3 \\
% \texttt{twoside} & use two-sided headers and footers even in one-sided documents \\
%          & for \Package{fancyhdr}-based pagestyles (version 4.1 or later) \\
% \texttt{headings} & redefine the \texttt{headings} page style to be fancy-based \\
% \texttt{myheadings} & redefine the \texttt{myheadings} page style to be fancy-based \\
% \bottomrule
% \end{tabular}
% \end{center}
%
% \begin{itemize}
% \item \OPTindex{nocheck}Option \texttt{nocheck} is described in section~\ref{sec:warning} on
%   page~\pageref{page:warning}.
%
% \item \OPTindex{compatV3}Option \texttt{compatV3} keeps two fancyhdr
%   version~3.x (or earlier) features that are now considered undesirable.
%   \begin{enumerate}
%   \item The automatic adjustment of \cs{headheight} or \cs{footskip}
%     when these are too small. This causes the page layout to become
%     inconsistent. See section~\ref{sec:warning} on
%     page~\pageref{page:warning}.
%   \item In these previous versions the changes to the
%     \Package{fancyhdr} headers and footers (including those by
%     \cs{fancyhead}, \cs{fancyheadoffset} and similar commands) are
%     made globally, except within a page style defined by
%     \cs{fancypagestyle}. That is, when these commands are given inside
%     a \LaTeX{} group, they affect the whole document, not only the
%     group. If your document depends on this behaviour, you can give
%     the \texttt{compatV3} package option. However, this is only
%     considered a short-time solution. You should change your document
%     as soon as possible to work around this problem. In version~4.0 and
%     later, without this option, the changes are always local.
%   \end{enumerate}
%   The option is scheduled to disappear in version~5 of
%   \Package{fancyhdr}.
%
% \item \OPTindex{twoside}Option \texttt{twoside} implements two-sided headers
% and footers in one-sided documents (version 4.1 or later). This applies only
% for \Package{fancyhdr}-based pagestyles. This option doesn't do anything
% special for two-sided documents (\texttt{twoside} documentclass option), as
% these already have that functionality. And with the \texttt{twoside}
% documentclass option that does apply to other pagestyles as well.
%
% \item \PSindex{headings}\PSindex{myheadings}\OPTindex{headings}\OPTindex{myheadings}
%   The options \texttt{headings} and \texttt{myheadings} redefine the
%   corresponding page style with fancyhdr commands (including a
%   decorative line under the header), so that you can later select this
%   page style as the page style for (part of) the
%   document\footnote{These options were copied from the
%   \texttt{nccfancyhdr} package, but contrary to that package, they are
%   not automatically selected.}.
% \end{itemize}
%
% \PSindex{headings}
% The page style \texttt{headings} is in some aspects similar to the default page
% style \texttt{fancy} settings. In the \texttt{fancy} page style, the
% page number is in the footer, but in the \texttt{headings}
% page style it is in the header. The header fields look similar, however.
%
% Please note that these page styles redefine the \cs{chaptermark} and/or
% \cs{[sub]sectionmark} commands (see section~\ref{sec:scoop}), as do the
% standard \latex/ page styles. The consequence is, that if you select
% e.g.\ \Cmd{pagestyle\{headings\}}, the definitions of
% \Cmd{pagestyle\{fancy\}} are overridden.
% Also when you change the headers and/or footers
% while such a page style is in effect, and you then switch back to this
% page style, for
% example with \verb|\pagestyle{headings}|, they revert to the built-in
% settings. Therefore it is not advisable to change the headers or
% footers in this way, but instead define your
% own page style, as explained in section~\ref{sec:fancypagestyle}.
%
% \section{The default layout}
% \label{sec:default}
% Let us use the \verb|book.cls| documentclass and the default settings for
% \Package{fancyhdr}; so we don't use any of the page style options in
% the \Cmd{usepackage\{fancyhdr\}} command, and we don't redefine any
% headers or footers. So just:
% \begin{verbatim}
% \usepackage{fancyhdr}
% \pagestyle{fancy}
% \end{verbatim}
% and let \Package{fancyhdr} take care of everything.  As mentioned
% before, we get a layout that is very similar to the page style \texttt{headings}.
%
% On the pages where new chapters start, we get a centered page number
% in the footer; there is nothing in the header, and there are no decorative lines.
%
% On an even page, we get the layout:
%
% \begin{fblock}
% \noindent\makebox[\textwidth]{\textsl{1.2  EVALUATION}\hfill
%  \textsl{CHAPTER 1. INTRODUCTION}}\showrule
% \noindent\makebox[\textwidth]{\hfill page body\hfill}\\[2\baselineskip]
% \noindent\makebox[\textwidth]{\hfill2\hfill}
% \end{fblock}
%
% On an odd page, we get the layout:
%
% \begin{fblock}
% \noindent\makebox[\textwidth]{\textsl{CHAPTER 1. INTRODUCTION}\hfill
%  \textsl{1.2  EVALUATION}}\showrule
% \noindent\makebox[\textwidth]{\hfill page body\hfill}\\[2\baselineskip]
% \noindent\makebox[\textwidth]{\hfill
% 3\hfill }
% \end{fblock}
%
% \noindent where the header text is slanted uppercase.
%
% This default layout is produced by the following commands:
% \CmdIndex{rightmark}
% \CmdIndex{leftmark}
% \begin{verbatim}
% \fancyhead[LE,RO]{\textsl{\rightmark}}
% \fancyhead[LO,RE]{\textsl{\leftmark}}
% \fancyfoot[C]{\thepage}
% \end{verbatim}
%
% The following settings are used for the decorative lines:
%
% \begin{tabbing}
% \CmdIndex{headrulewidth}
% \noindent \cs{headrulewidth}\qquad \qquad \qquad \=0.4\=pt\\
% \CmdIndex{footrulewidth}
% \Cmd{footrulewidth}\>0\>pt
% \end{tabbing}
%
% The header text is turned into all uppercase by the standard \LaTeX{}
% code in \verb|book.cls|.
%
% \section{The scoop on \latex/'s marks}
% \label{sec:scoop}
%
% Usually, for documents of class \verb|book| and \verb|report|, you may
% want to use chapter and section information in the headings (chapter only
% for one-sided printing), and for documents of class \verb|article|,
% section and subsection information (section only for one-sided
% printing).  \latex/ uses a marker mechanism to remember the chapter and
% section (section and subsection) information for a page; this is
% discussed in detail in \emph{The \LaTeX{} Companion, Third Edition},
% section 5.3.4 (Part I).
%
% There are two ways you can use and change the higher- and lower-level
% sectioning information available to you.  The macros:
% \CmdIndex{rightmark}
% \CmdIndex{leftmark}
% \cs{leftmark}
% (higher-level) and \cs{rightmark} (lower-level) contain the information
% processed by \latex/, and you can use them directly as shown in
% section~\ref{sec:default}.
%
% These marks are set by the commands
% \Cmd{markboth\{leftmark\}\{rightmark\}} and \Cmd{markright\{rightmark\}}.
% These commands are usually used inside commands like \cs{chaptermark}
% and \cs{sectionmark} but they can be also be given directly in your
% document, although this not very usual.
%
% The \cs{leftmark} contains the \textbf{L}eft argument of the \emph{\textbf{L}ast}
% \cs{markboth} on the page, the \cs{rightmark} contains the \textbf{R}ight
% argument of the \emph{fi\textbf{R}st} \cs{markboth} or the only argument of the
% \emph{fi\textbf{R}st} \cs{markright} on the page. If no marks are present on a
% page they are ``inherited'' from the previous page.
%
% You can influence how chapter, section, and subsection
% information (only two of them!) is displayed by redefining the
% \CmdIndex{chaptermark}
% \cs{chaptermark},
% \CmdIndex{sectionmark}
% \CmdIndex{subsectionmark}
% \cs{sectionmark}, and \cs{subsectionmark} commands\footnote{There are
%   similar commands for \texttt{paragraph} and \texttt{subparagraph} but
%   they are seldom used.}. You must put the redefinition
% after the first call of \Cmd{pagestyle\{fancy\}} as this
% sets up the defaults.
%
% Let us illustrate this with chapter info. It is made up of three parts:
% \begin{itemize}
% \CmdIndex{thechapter}
% \item  the number (say, 2), displayed by the macro \cs{thechapter}
% \item  the name (in English, Chapter), displayed by the macro
% \CmdIndex{chaptername}
%    \cs{chaptername}
% \item  the title, contained in the  argument of
%    \cs{chapter}.
% \end{itemize}
% We combine these below with \cs{markboth} in \cs{chaptermark}.
%
% For the lower-level sectioning information, we do the same with
% \cs{markright} in \cs{sectionmark}.
%
% So if ``2. Implementation'' is the current chapter
% and ``2.1.\ First steps'' is the current section, then
%
% ^^A \Example
% \begin{verbatim}
% \renewcommand{\chaptermark}[1]{%
%   \markboth{\chaptername\ \thechapter.\ #1}{}}
% \renewcommand{\sectionmark}[1]{\markright{\thesection.\ #1}}
% \end{verbatim}
% will give
%    ``Chapter 2. Implementation'' and ``2.1.\ First steps''
%
% Redefining the \cs{chaptermark} and \cs{sectionmark} commands may
% not eliminate all uppercaseness. E.g.\ the bibliography will have a title
% \CmdIndex{uppercase}
% \index{BIBLIOGRAPHY}
% of \textsc{bibliography} in the header, as the \cs{MakeUppercase} is
% explicitly given in the definition of \cs{thebibliography}. Similar for
% \index{INDEX}
% \textsc{index} etc.\ If you don't want to redefine these commands, you can
% use the \cs{nouppercase} command that \Package{fancyhdr} makes available in the header
% and footer fields. Note that this may screw other things, like uppercase
% roman numerals in your headers, so it should be used with care. Essentially
% this command typesets its argument in an environment where
% \cs{MakeUppercase} and \cs{uppercase} are changed into identity operations.
%
% ^^A \Example
% \begin{verbatim}
% \fancyhead[L]{\nouppercase{\rightmark}}
% \fancyhead[R]{\nouppercase{\leftmark}}
% \end{verbatim}
%
% Figure~\ref{fig:markers} shows some variants for ``Chapter 2.\ Implementation''
% (the last example is appropriate in some non-English languages). The \texttt{\%}
% signs at the end of the lines are to prevent unwanted space. Normally you
% would continue the lines and remove these \texttt{\%} signs\footnote{The \texttt{\bs
%     MakeUppercase} command is used in \latex/ to generate uppercase text,
%   while \cs{uppercase} is the plain \TeX{} command for this. The difference is
%   that \cs{MakeUppercase} also deals with non-ASCII letters.}.
%
% \begin{figure}[tb]
% \CmdIndex{chaptermark}
% \CmdIndex{uppercase}
% \CmdIndex{MakeUppercase}
% \setlength{\columnsep}{20pt}\small
% \begin{multicols}{2}
% \noindent Code:\\
% \mbox{}\\
% \verb|\renewcommand{\chaptermark}[1]{%|\\
% \verb| \markboth{\chaptername|\\
% \verb| \ \thechapter.\ #1}{}}|\\
% \mbox{}\\
% \verb|\renewcommand{\chaptermark}[1]{%|\\
% \verb| \markboth{\MakeUppercase{%|\\
% \verb| \chaptername}\ \thechapter.%|\\
% \verb| \ #1}{}}|\\
% \mbox{}\\
% \verb|\renewcommand{\chaptermark}[1]{%|\\
% \verb| \markboth{\MakeUppercase{%|\\
% \verb| \chaptername\ \thechapter.%|\\
% \verb| \ #1}}{}}|\\
% \mbox{}\\
% \verb|\renewcommand{\chaptermark}[1]{%|\\
% \verb| \markboth{#1}{}}|\\
% \mbox{}\\
% \verb|\renewcommand{\chaptermark}[1]{%|\\
% \verb| \markboth{\thechapter.\ #1}{}}|\\
% \mbox{}\\
% \verb|\renewcommand{\chaptermark}[1]{%|\\
% \verb| \markboth{\thechapter.%|\\
% \verb| \ \chaptername.\ #1}{}}|\\
% Prints:\\
% \mbox{}\\
% Chapter 2.\ Implementation\\
% \mbox{}\\
% \mbox{}\\
% \mbox{}\\
% CHAPTER 2.\ Implementation\\
% \mbox{}\\
% \mbox{}\\
% \mbox{}\\
% \mbox{}\\
% CHAPTER 2.\ IMPLEMENTATION\\
% \mbox{}\\
% \mbox{}\\
% \mbox{}\\
% \mbox{}\\
% Implementation\\
% \mbox{}\\
% \mbox{}\\
% 2.\ Implementation\\
% \mbox{}\\
% \mbox{}\\
% 2.\ Chapter.\ Implementation\\
% \mbox{}\\
% \end{multicols}
% \caption{Marker variants}\label{fig:markers}
% \end{figure}
%
% It should be noted that the \latex/ marking mechanism works fine with
% chapters (which always start on a new page) and sections (which are
% reasonably long).  It does not work quite as well with short sections and
% subsections.  This is a problem with \latex/, not with
% \Package{fancyhdr}.
%
% As an example let's take a page layout where the leftmarks are generated by
% the sections and the rightmarks by the subsections (as is default in the
% \texttt{article} class). Take a page with some short sections, e.g.,
%
% \begin{samepage}
% \noindent Section 1.\\
% subsection 1.1\\
% subsection 1.2\\
% Section 2.
% \end{samepage}
%
% As the leftmark contains the \emph{last} mark of the page it will be
% ``Section 2.'', and the rightmark will be ``subsection 1.1'' as it will be
% the \emph{first} mark of the page. So the page header info will combine
% section 2 with subsection 1.1 which isn't very nice.
% One thing you can do in these cases is use only the \cs{rightmark}s and
% redefine \cs{sectionmark} accordingly.
%
% However, the \Package{extramarks} package described in section~\ref{sec:xmarks}
% contains a command
% \CmdIndex{firstleftmark}
% \cs{firstleftmark} that can be used to get the first of the leftmarks
% on the page in the header. This might be the best solution in this
% situation. Now the header will contain ``Section 1.'' in the situation
% described above.
% ^^A \Example
% \begin{verbatim}
% \usepackage{extramarks}
%  . . .
% \fancyhead[R]{\firstleftmark}
% \end{verbatim}
%
% Another problem with the marks in the standard \latex/ classes is that the
% higher level sectioning commands (e.g.\ \cs{chapter}) call
% \cs{markboth} with an empty right argument. This means that on the first
% page of a chapter (or a section in article style) the \cs{rightmark}
% will be empty. The underlying problem is that the \tex/ machinery has
% only one \cs{mark}. All the marks must be packed together in
% this one. So there are no independent left or right marks. That also
% applies to the extra marks as described in section~\ref{sec:xmarks}.
% If this is a problem you must manually insert extra
% \cs{markright} commands or redefine the \cs{chaptermark}
% (\cs{sectionmark}) commands to issue a \cs{markboth} command with
% two decent parameters.
%
% As a final remark you should also note that the \verb|*| forms of the
% \cs{chapter} etc.\ commands do \emph{not} call the mark commands. So if
% you want your preface to set the header info but not be numbered nor be put in
% the table of contents, you must issue the \cs{markboth} command
% yourself, e.g.,
%
% \begin{verbatim}
% \chapter*{Preface}
% \markboth{Preface}{}
% \end{verbatim}
%
% Or in a documentclass without chapters:
% \begin{verbatim}
% \section*{Preface}
% \markboth{Preface}{}
% \end{verbatim}
%
% \section{Dictionary style headers}
%
% \index{dictionary}
% \index{concordance}
% Dictionaries and concordances usually have a header containing the first
% word defined on the page or both the first and the last words. This can
% easily be accomplished with \Package{fancyhdr} and \latex/'s
% \texttt{mark} mechanism. Of course if you use the marks for dictionary
% style headers, you cannot use them for chapter and section information, so
% if there are also chapters and sections present, you must redefine the
% \cs{chaptermark} and \cs{sectionmark} to make them harmless:
%
% \begin{verbatim}
% \renewcommand{\chaptermark}[1]{}
% \renewcommand{\sectionmark}[1]{}
% \end{verbatim}
%
% Now you do a \Cmd{markboth\{\#1\}\{\#1\}} for each dictionary or concordance
% entry \verb|#1| and use \cs{rightmark} for the first entry defined on
% the page and \cs{leftmark} for the last one.
%
% If you want to use a header entry of the form \textsf{firstword--lastword}
% it would be nice if this would be reduced to just the form
% \textsf{firstword} if both are the same. This could happen if there is just
% one entry on the page. In this case a test must be made to check if the
% marks are the same.  However, \tex/'s marks are strange beasts, which
% cannot be compared out of the box with the plain \tex/ \cs{if} commands.
% \TTindex{ifthen}
% Fortunately the \Package{ifthen} package works well:
%
% \begin{verbatim}
% \newcommand{\mymarks}{
%   \ifthenelse{\equal{\leftmark}{\rightmark}}
%     {\rightmark} % if equal
%     {\rightmark--\leftmark}} % if not equal
% \fancyhead[LE,RO]{\mymarks}
% \fancyhead[LO,RE]{\thepage}
% \end{verbatim}
%
% \section{Fancy layouts}
% \label{sec:fancy}\label{sec:warning}
%
% \index{multi-line}
% You can make a multi-line field with the \bsbs{} command.  It is also
% possible to put extra space in a field with the \cs{vspace} command.
% Note that if you do this you will probably have to increase the height of
% \CmdIndex{headheight}
% \CmdIndex{footskip}
% the header (\cs{headheight}) and/or of the footer (\cs{footskip}),
% \index{Overfull \verb+\vbox+ \ldots}
% otherwise you may get error messages ``Overfull \cs{vbox} \ldots has
% occurred while \cs{output} is active''^^A
% \footnote{If you use \texttt{11pt} or \texttt{12pt} you will probably also
%   have to do this, because \LaTeX's defaults are quite small}. See the
% warning below.
% See also section 5.1 and 5.2 of the \LaTeX{} \emph{Companion, Third Edition}, (Part I)
% for detail.
%
% For instance, the following code will place  the section title and the
% subsection title of an article in two lines in the upper right hand
% corner:
%
% \begin{verbatim}
% \documentclass{article}
% \usepackage{fancyhdr}
% \pagestyle{fancy}
% \addtolength{\headheight}{\baselineskip}
% \renewcommand{\sectionmark}[1]{\markboth{#1}{}}
% \renewcommand{\subsectionmark}[1]{\markright{#1}}
% \fancyhead[R]{\leftmark\\\rightmark}
% \end{verbatim}
%
% You can also customize the decorative lines.  You can make the decorative
% line in the header quite thick with
%
% \CmdIndex{headrulewidth}
% \begin{verbatim}
% \renewcommand{\headrulewidth}{0.6pt}
% \end{verbatim}
% or you can make the decorative line in the footer disappear with
% \CmdIndex{footrulewidth}
% \begin{verbatim}
% \renewcommand{\footrulewidth}{0pt}
% \end{verbatim}
%
% The decorative lines, themselves, are defined in the two macros
% \cs{headrule} and \cs{footrule}.  For instance,
% if you want a dotted line rather than a solid line in the header,
% redefine the command \cs{headrule}:
%
% \begin{verbatim}
% \renewcommand{\headrule}{\vbox to 0pt
%     {\makebox[\headwidth]{\dotfill}\vss}}
% \end{verbatim}
%
% The redefined \cs{headrule} should preferably take up no vertical space, as in the example above, and as in the standard definition. If it does take vertical space, the header may come too close to the text, or even intrude in the text. In that case \Package{fancyhdr} will give you a warning that \cs{headheight} is too small. Like
% \begin{verbatim}
% Package fancyhdr Warning: \headheight is too small (12.0pt):
% (fancyhdr)                Make it at least 14.0pt, for example:
% (fancyhdr)                \setlength{\headheight}{14.0pt}.
% (fancyhdr)                You might also make \topmargin smaller to compensate:
% (fancyhdr)                \addtolength{\topmargin}{-2.0pt}.
% \end{verbatim}
% \label{page:warning}\index{Warning}
% You will probably get this warning on every page.
% \textbf{Note:} Before version 4.0, \Package{fancyhdr} would change the
% \cs{headheight} itself, causing the text on the following pages
% to come out lower than on this page. This appeared to be confusing, so
% since version~4.0 this is no longer done (except when you give the
% \OPTindex{compatV3}%
% \texttt{compatV3} package option. You should not give this as a
% permanent solution, however, but solve the problem). Therefore you are strongly advised to
% redefine \cs{headheight} in the preamble, like this:
% \begin{verbatim}
% \setlength{\headheight}{14pt}
% \end{verbatim}
% This would cause the main text to be put 2pt lower on the page, which
% might be undesirable. You can compensate this by making \cs{topmargin}
% correspondingly smaller, for example
% \begin{verbatim}
% \addtolength{\topmargin}{-2pt}
% \end{verbatim}
% A similar change would be necessary for \cs{footskip} if the footer comes out too tall.
%
% You can also eliminate this check completely by using the
% \OPTindex{nocheck}
% \texttt{nocheck} option of the package. But this may risk unwanted
% run-ins of the header or footer with other text. So this is generally
% discouraged. It is better to change \cs{headheight}, \cs{footskip},
% and/or \cs{topmargin}. But in cases where you generate the \latex/
% code automatically, and the software does not know how tall the header
% or footer will be, this may be handy.
%
% As an alternative to changing \cs{headrulewidth} to 0 to have the rule
% disappear, you can also make it empty with
% \begin{verbatim}
% \renewcommand{\headrule}{}
% \end{verbatim}
% Visually this makes no difference, but it is more difficult to restore
% it later to its default value.
%
% Finally, let us make a real `decorative' line\footnote{Based upon an idea by Wayne Chan.}.
% \begin{verbatim}
% \usepackage{fourier-orns}
% ...
% \renewcommand\headrule{%
%       \hrulefill
%       \raisebox{-2.1pt}
%           {\quad\decofourleft\decotwo\decofourright\quad}%
%       \hrulefill}
% \end{verbatim}
% This gives us the following headrule:
%
% \noindent\makebox[\textwidth]{\hrulefill
% \raisebox{-2.1pt}[10pt][10pt]{\quad\decofourleft\decotwo\decofourright\quad}\hrulefill}
%
% Note that we haven't taken care to make this decorative line occupy
% zero vertical space. The consequence is that it will extend towards
% the text and that we will get the warning about \cs{headheight} too small. So we
% should change \cs{headheight} as given above. Another problem is that
% the distance between the line and the header text is quite big. We can
% reduce this by putting a negative \cs{vspace} above it, like
% \begin{verbatim}
% \renewcommand\headrule{%
%       \vspace{-6pt}
%       \hrulefill
%       \raisebox{-2.1pt}
%           {\quad\decofourleft\decotwo\decofourright\quad}%
%       \hrulefill}
% \end{verbatim}
%
% We can use the same code for the \cs{footrule}, but we wouldn't need
% the \cs{vspace}. If you want to change the distance between that
% decorative line and the footer text you need to adjust the
% \CmdIndex{footruleskip}
% \DescribeMacro{\footruleskip}
% parameter \cs{footruleskip}. It
% defines the distance between the decorative line in the footer and the top
% of the footer text line. By default it is set to 30\% of the normal line
% distance. You may want to adjust it if you use unusally large or small
% fonts in the footer. Change it with \cs{renewcommand}.
%
% You can also change the distance between the baseline of the header text and the
% decorative line in the header. Normally this distance is determined by
% the maximum depth of possible descenders in the text, which is 30\% of
% the normal line distance. You can increase or decrease this distance
% \CmdIndex{headruleskip}
% \DescribeMacro{\headruleskip}
% by defining the macro \cs{headruleskip}, similar to \cs{footruleskip}
% \footnote{(But \cs{headruleskip} is only available since version~4.0.)}.
% This defines the extra distance. The default value is 0pt, and
% positive values make the distance larger, and negative values make the
% distance shorter.
% Please note that this does not change the position
% of the decorative line with respect to the page, but it shifts the
% header text. If you want to keep the header text fixed, but move the
% decorative line, then you must also change the parameter \cs{headsep}
% (see figure~\ref{fig:layout}). \strut
%
% \pagestyle{showstruts}
% \noindent\begin{minipage}{\textwidth}
% \phantomsection\label{showstruts}
% \indent The header and footer in this page
% show the \emph{strut} (the amount of space in the text area above and
% below the baseline), and the \cs{headruleskip} and \cs{footruleskip}.
% For this page \cs{headruleskip} is 4pt.
% \end{minipage}
%
% \section{Two book examples}
% \label{sec:book-examples}
%
% The following definitions give an approximation of the style
% used in L. Lamport's \latex/ book.
%
% Lamport's header overhangs the outside margin.  This is done as follows.
%
% The width of headers and footers is \cs{headwidth}, which by default
% equals the width of the text: \cs{textwidth}. You can make the width
% \CmdIndex{headwidth}
% wider (or narrower) by redefining \cs{headwidth} with the
% \cs{setlength} and \cs{addtolength} commands.
% To overhang the outside margin where the marginal notes are
% \CmdIndex{marginparsep}
% \CmdIndex{marginparwidth}
% printed, add both \cs{marginparsep} and \cs{marginparwidth} to
% \cs{headwidth} with the commands:
%
% \begin{verbatim}
% \addtolength{\headwidth}{\marginparsep}
% \addtolength{\headwidth}{\marginparwidth}
% \end{verbatim}
%
% \begin{flushleft}
% It is safest to issue these commands \emph{after} the first
% \Cmd{pagestyle\{fancy\}} command.
% \end{flushleft}
%
% And now a complete definition of Lamport's book style. The header has
% the width of the text plus the marginpar area. The header on even
% pages has the page number on the left, and the chapter title on the
% right. On odd pages it has the section title preceded by the section
% number on the left and the page number on the right. All in boldface.
% There is no footer. The \texttt{plain} style is redefined to have no
% header and no footer. (In the \LaTeX{} book this makes sense because
% each chapter begins with a page that contains only a drawing. In most
% other cases you probably would want a page number on the page.)
%
% \begin{verbatim}
% \documentclass{book}
% \usepackage{fancyhdr}
% \pagestyle{fancy}
% \addtolength{\headwidth}{\marginparsep}
% \addtolength{\headwidth}{\marginparwidth}
% \renewcommand{\chaptermark}[1]{\markboth{#1}{}}
% \renewcommand{\sectionmark}[1]{\markright{\thesection\ #1}}
% \fancyhf{}
% \fancyhead[LE,RO]{\textbf{\thepage}}
% \fancyhead[LO]{\textbf{\rightmark}}
% \fancyhead[RE]{\textbf{\leftmark}}
% \fancypagestyle{plain}{%
%    \fancyhead{} % get rid of headers
%    \renewcommand{\headrulewidth}{0pt} % and the line
% }
% \end{verbatim}
% \PSindex{plain}
%
% Notice that the \cs{chaptermark} and \cs{sectionmark} commands have
% been redefined to eliminate the chapter numbers and the uppercaseness.
%
% For more control about the horizontal position of the headers and/or
% footers, \Package{fancyhdr} has additional commands to specify the
% offset of the header and/or footer elements. Use
% \Cmd{fancyhfoffset[place]\{length\}}
% \CmdIndex{fancyhfoffset}
% to offset one or more elements. The \texttt{place} parameter is like
% the optional parameter of \cs{fancyhf}, like \texttt{L R E O}, except
% that \texttt{C} cannot be used. It specifies for which elements the
% offset should be applied. The \texttt{length} parameter specifies the
% actual offset. Positive values move the element outward (into the
% margin), negative values inward. There are also specialised commands
% \cs{fancyheadoffset} and \cs{fancyfootoffset}, which have the
% \texttt{H} and \texttt{F} parameter pre-applied, respectively.
% \CmdIndex{fancyheadoffset}
% \CmdIndex{fancyfootoffset}
%
% When you use these commands, \latex/ will recalculate \cs{headwidth},
% based on the given parameters.
%
% So the above example could also have been done with (N.B. You can only
% use such an expression as a length parameter if the \Package{calc}
% package is used):
%
% \begin{verbatim}
% \fancyheadoffset[LE,RO]{\marginparsep+\marginparwidth}
% \end{verbatim}
%
% \textbf{NOTE:} If you change the \cs{textwidth} in the middle of your
% document, for example by using the \Package{geometry}\TTindex{geometry} package,
% by default the \cs{headwidth} will not change, as it picks up the value
% of \cs{textwidth} at the beginning of the document. If you want it to track
% the changes to \cs{textwidth}, you should use the command \verb|\fancyhfoffset{0pt}|
% in the neighborhood of your header/footer definitions, unless you
% already use such an \texttt{\ldots offset} command, of course.
% \vspace{\baselineskip}
%
% For the second example, we take the \amslatex/ book\footnote{George Gratzer,
% \textit{Math into LaTeX, An Introduction to \LaTeX{} and \amslatex/}, Birkhauser, Boston.}.
%
% Chapter pages have no headers or footers.  So we declare
%
% \begin{verbatim}
% \thispagestyle{empty}
% \end{verbatim}
% for every chapter page, and we do not need to redefine plain.
%
% Chapter and section titles appear in the form: 2.\ IMPLEMENTATION, so we have
% to redefine \cs{chaptermark} and \cs{sectionmark} as follows (see
% Section~\ref{sec:scoop}):
%
% \begin{verbatim}
% \renewcommand{\chaptermark}[1]%
%    {\markboth{\MakeUppercase{\thechapter.\ #1}}{}}
% \renewcommand{\sectionmark}[1]%
%    {\markright{\MakeUppercase{\thesection.\ #1}}}
% \end{verbatim}
%
% On an even page, the page number is printed as the left header and
% the chapter info as the right header; on an odd page, the section info
% is printed as the left header and the page number as the right header.  The
% center headers are empty.  There are no footers.
%
% There is a decorative line in the header.  It is 0.5pt wide, so we need
% the commands:
%
% \begin{verbatim}
% \renewcommand{\headrulewidth}{0.5pt}
% \renewcommand{\footrulewidth}{0pt}
% \end{verbatim}
%
% The font used in the headers is 9 pt bold Helvetica.  The \textsf{PSNFSS} system
% (originally by the late Sebastian Rahtz) uses the short (Karl Berry) name \texttt{phv} for
% Helvetica. The more modern \LaTeX{} solution is to use the \TeX{} Gyre font
% Heros, which uses the short name \texttt{qhv} so this font is selected with the commands^^A
% \footnote{See \emph{The \LaTeX{} Companion, Third Edition}, Part I, section
% 9.5.2, and Part II, section 10.8.16.}:
% \begin{verbatim}
% \fontfamily{qhv}\fontseries{b}\fontsize{9}{11}\selectfont
% \end{verbatim}
% Let us define a shorthand for this:
% \begin{verbatim}
% \newcommand{\helv}{%
%    \fontfamily{qhv}\fontseries{b}\fontsize{9}{11}\selectfont}
% \end{verbatim}
%
% Now we are ready for the page layout:
%
% \begin{verbatim}
% \documentclass{book}
% \usepackage{fancyhdr}
% \pagestyle{fancy}
% \renewcommand{\chaptermark}[1]%
%    {\markboth{\MakeUppercase{\thechapter.\ #1}}{}}
% \renewcommand{\sectionmark}[1]%
%    {\markright{\MakeUppercase{\thesection.\ #1}}}
% \renewcommand{\headrulewidth}{0.5pt}
% \renewcommand{\footrulewidth}{0pt}
% \newcommand{\helv}{%
%    \fontfamily{qhv}\fontseries{b}\fontsize{9}{11}\selectfont}
% \fancyhf{}
% \fancyhead[LE,RO]{\helv \thepage}
% \fancyhead[LO]{\helv \rightmark}
% \fancyhead[RE]{\helv \leftmark}
% \end{verbatim}
%
%
% \section{Special page layout for float pages}
% \label{sec:float}
%
% \index{float page}
% Some people want to have a special layout for float pages (pages only
% containing floats). As these pages
% are generated autonomically by \latex/, the user doesn't have any control
% over them. There is no \cs{thispagestyle} for float pages and any change
% of the page style will at least also affect the page before the float page.
% With \Package{fancyhdr}, however, you can specify in each of
% the header- or footer fields
%
% \medskip
% \Cmd{iffloatpage\{}\meta{value for float page}\verb|}{|\meta{value for other pages}\verb|}|
% \medskip
%
% You can even use this to get rid of the decorative line on float pages only
% by defining:
%
% \begin{verbatim}
% \renewcommand{\headrulewidth}{\iffloatpage{0pt}{0.4pt}}
% \end{verbatim}
%
% \textbf{NOTE:} There is also a package \TTindex{floatpag}%
% \Package{floatpag}\footnote{\url{https://www.ctan.org/pkg/floatpag}} by Vytas
% Statulevičius and Sigitas Tolušis that has a command
% \cs{floatpagestyle}\marg{pagestyle}, that applies \meta{pagestyle} to
% all float pages, where \meta{pagestyle} can be defined with
% \cs{fancypagestyle} (or by any other means).
%
% \textbf{NOTE:} There is also a package \TTindex{floatpag}%
% \Package{floatpag}\footnote{\url{https://www.ctan.org/pkg/floatpag}} by Vytas
% Statulevičius and Sigitas Tolušis that has a command
% \cs{floatpagestyle}\marg{pagestyle}, that applies \meta{pagestyle} to
% all float pages, where \meta{pagestyle} can be defined with
% \cs{fancypagestyle} (or by any other means). In some cases this might
% be simpler than putting \cs{iffloatpage} in various headers or footers.
%
% Sometimes you may want to change the layout also for pages that contain a
% float on the top of the page, a float on the bottom of the page or a footnote on the bottom of the page.
%
% \Package{fancyhdr} gives you the commands \cs{iftopfloat}, \cs{ifbotfloat} and \cs{iffootnote}
% similar to \cs{iffloatpage}. For example:
% \begin{verbatim}
% \fancyhead[R]{\iftopfloat{This page has a topfloat}
%                          {There is no topfloat here}}
% \end{verbatim}
%
% Note: Marks in floats will not be visible in \latex/'s output routine, so
% it is not useful to put marks in floats. So there is currently no way to
% let a float (e.g.\ a figure caption) influence the page header or footer.
%
% \section{Those blank pages}
% \label{sec:blank}
%
% In the \texttt{book} class when the \texttt{openany} option is not given or
% in the \texttt{report} class when the \texttt{openright} option is given,
% chapters start at odd-numbered pages, half of the time causing a blank page
% to be inserted. Some people prefer this page to be completely empty, i.e.\
% without headers and footers. This cannot be done with \cs{thispagestyle}
% as this command would have to be issued on the \emph{previous} page. There
% is, however, no magic necessary to get this done:
%
% \PSindex{empty}
% \CmdIndex{clearpage}
% \CmdIndex{cleardoublepage}
% \begin{verbatim}
% \clearpage\begingroup\pagestyle{empty}\cleardoublepage\endgroup
% \end{verbatim}
%
% As the \Cmd{pagestyle\{empty\}} is enclosed in a group it only affects the
% page that may be generated by the \cs{cleardoublepage}.  You can of
% course put the above in a private command. If you want to have this done
% automatically at each chapter start or when you want some other text on the
% page then you must redefine the \cs{cleardoublepage} command.
% \index{blank page}
% \begin{verbatim}
% \makeatletter
% \def\cleardoublepage{\clearpage\if@twoside \ifodd\c@page\else
%  \begingroup
%   \mbox{}
%   \vspace*{\fill}
%   \begin{center}
%     This page intentionally contains only this sentence.
%   \end{center}
%   \vspace{\fill}
%   \thispagestyle{empty}
%   \newpage
%   \if@twocolumn\mbox{}\newpage\fi
%  \endgroup\fi\fi}
% \makeatother
% \end{verbatim}
%
% \section{\textsf{N} of \textsf{M} style page numbers}
% \label{sec:nofm}
%
% Some document writers prefer the pages to be numbered as \textsf{n} of
% \textsf{m} where \textsf{m} is the number of pages in the document.
% There is a package \Package{lastpage}
% \TTindex{lastpage}
% available which you can use with \Package{fancyhdr} as follows:
%
% \begin{verbatim}
% \usepackage{lastpage}
% ...
% \fancyfoot[C]{\thepage\ of \pageref{LastPage}}
% \end{verbatim}
% Because you want the pages with pagestyle \texttt{plain} to contain
% the same style of page numbers, you will have to redefine this
% pagestyle too.
% \begin{verbatim}
% \fancypagestyle{plain}{\fancyhead{}\renewcommand{\headrule}{}}
% \end{verbatim}
% We clear all the headers including its rule. The footer will be
% ``inherited'' from the pagestyle \texttt{fancy}.
%
% The value of the \texttt{LastPage}\TTindex{LastPage} label can be used to
% make different headers or footers on the last page of a document. E.g.\ if
% you want the footer of every odd page, except if it is the last one, to
% contain the text ``Please turn over'', this can be done by checking if
% the page number is odd, and if it is equal to the number of the last page.
%
% We use the macro \cs{getpagerefnumber} from the package\TTindex{refcount}
% \Package{refcount}, because \cs{pageref} isn't always usable in a
% numerical context (it is meant for typesetting only). This is also done in
% following similar examples.
%
% \TTindex{ifthen}\TTindex{lastpage}\TTindex{refcount}
% \begin{verbatim}
% \usepackage{ifthen}
% \usepackage{lastpage}
% \usepackage{refcount}
% ...
% \fancyfoot[R]{%
%   \ifthenelse{\isodd{\value{page}} \and
%     \not \( \value{page}=\getpagerefnumber{LastPage} \) }%
%       {Please turn over}{}%
% }
% \end{verbatim}
%
% In order to get the number of pages correctly used, you usually have
% to do one additional \LaTeX{} run.
%
%
% \section{Chapter or section related page numbers}
%
% In technical documentation very often page numbers are used of the form
% 2-10 where the first number is the chapter number and the second is the
% pagenumber relative to the chapter. Sometimes section is used rather than
% chapter. The package \Package{chappg} can be used to get this format.
%
% Basically this package redefines \cs{thepage} as
% \cs{thechapter}\cs{chappgsep}\Cmd{arabic\{page\}}, where
% \cs{chappgsep} by default is `-'. If you want do use a different
% separator, you must redefine \cs{chappgsep}, for example to use an
% en-dash:
%
% \begin{verbatim}
% \renewcommand{\chappgsep}{--}
% \end{verbatim}
%
% To use a different prefix, for example the section number, use the
% \Cmd{pagenumbering\{bychapter\}} command with an optional argument
% specifying the prefix.
% \CmdIndex{pagenumbering}
%
% \begin{verbatim}
% \clearpage
% \pagenumbering[\thesection]{bychapter}
% \end{verbatim}
%
% What the package also does is reset the page number to 1 at the beginning
% of each chapter.
%
% In general it is advisable to give a \cs{clearpage} or
% \cs{cleardoublepage} before changing the page numbering.
%
% In the frontmatter of your document (for example the Table of
% Contents) there will be no chapter numbers. Therefore a simple page
% number will be used there. This may be confusing, so you might prefer to use roman pagenumbers
% in the front matter. Do this by using \verb+\pagenumbering{roman}+ in
% the beginning of the document and \verb+pagenumbering{bychapter}+
% after the first \cs{chapter} command. If you want to do it before the
% \cs{chapter} command you must precede it
% by a \cs{newpage} command (see the next section).
% \begin{verbatim}
% \pagenumbering{roman}
% \tableofcontents
% \newpage
% \pagenumbering{bychapter}
% \chapter{Introduction}
% \end{verbatim}
%
% There is a caveat when you have appendices in your document. Before the
% \cs{appendix} command you should give a \cs{clearpage} or
% \cs{cleardoublepage}. See the \Package{chappg} documentation for
% details.
%
% There is a fundamental difference between the page numbering of the style
% ``\emph{m} of \emph{n}'' as described in the previous section and the
% current one. The \emph{m} of \emph{n} style is only used in the page header
% or footer, but not in the table of contents, index, or references like
% ``\emph{See page \emph{xx}}''. Therefore it does not change the command
% \cs{thepage}. The page numbering style ``2-10'', however should be used
% in all references to the page number, therefore it must be done by redefining
% \cs{thepage}.
%
% \section{Switching page styles}
% \label{sec:switching}
%
% Page style \texttt{fancy}, if not redefined, does not have the definitions of the
% headers and footers built-in, but they are defined in the document,
% globally, or locally in a group. This also applies to the definitions of the
% \cs{chaptermark} and/or \cs{[sub]sectionmark} commands. So if you want
% to switch from another page style to the \texttt{fancy} page style
% later in the document, and that other page style has changed for
% example the \cs{chaptermark} and/or \cs{[sub]sectionmark} commands,
% you will have to redefine these yourself and maybe also
% the definitions of the headers and footers, at that point.
% For example
% \begin{verbatim}
% \pagestyle{fancy}
% \renewcommand{\chaptermark}[1]{\markboth{Chapter \thechapter. #1}{}}
% \renewcommand{\sectionmark}[1]{\markright{\thesection\ #1}}
% \end{verbatim}
%
% If the previous page style was one of the standard \LaTeX{} page
% styles, or some page style that is not based on \Package{fancyhdr},
% then the definitions of \cs{fancyhead} or \cs{fancyfoot} are not
% affected. So strictly you don't have to include them. But if it was
% based on \Package{fancyhdr} and had different definitions, you will
% get the wrong headers and/or footers when you switch back to page
% style \texttt{fancy}. So it is safer to include them anyway.
%
% A better possibility is to define your own page style, and include
% these definitions in that page style:
% \begin{verbatim}
% \fancypagestyle{myfancy}{
%   \renewcommand{\chaptermark}[1]{\markboth{Chapter \thechapter. ##1}{}}
%   \renewcommand{\sectionmark}[1]{\markright{\thesection\ ##1}}
%   \fancyhead{...}
% }
% ...
% \pagestyle{myfancy}
% \end{verbatim}
% Please note that you now have to double the \verb|#| signs, because the
% definitions are inside a macro.
%
% In general, when you use only one page style \texttt{fancy} in your
% document, with the occasional \cs{thispagestyle} excursion to page
% style \texttt{plain} or \texttt{empty}, you can just keep the
% definitions globally in your document, but as soon as you use more
% than one page style, and switch between them, it is highly advisable
% to define them (including page style \texttt{fancy}) with
% \cs{fancypagestyle} and put all the relevant definitions inside them.
%
% There is another caveat, when switching page styles, if they have
% different definitions of \cs{chaptermark} in the \texttt{book} or
% \texttt{report} document class or similar ones. When you put the
% \cs{pagestyle} command \emph{after} the \cs{chapter} command, then the
% \cs{chapter} command calls the \cs{chaptermark} of the previous page
% style, which is probably not what you intended. So you must issue the
% \cs{pagestyle} command \emph{before} the \cs{chapter} command. But
% this would probably change the page style of the previous page, which
% is too early. Therefore you would have to give a \cs{newpage},
% \cs{clearpage} or \cs{cleardoublepage} command
% before the \cs{pagestyle} command, so that the last page will be
% finished with the previous page style. I.e., the proper sequence is:
% \begin{verbatim}
% \newpage % (or \clearpage or \cleardoublepage)
% \pagestyle{newstyle}
% \chapter{My New Chapter}
% \end{verbatim}
%
% \section{When to change the headers and footers?}
% \label{sec:change}
%
% In \smartref{sec:change}{sec:switching} we switched page styles at a
% point that has a clear page break (the beginning of a chapter).
% Sometimes you want to change only a header or footer without changing
% the whole page style.
%
% It should be noted that although the \Package{fancyhdr} commands like
% \cs{fancyhead} take effect immediately, this does not mean that any
% ``variables'' used in these commands get the value they have at the place
% where these commands are given. E.g.\ if \Cmd{fancyfoot[C]\{}\Cmd{thepage\}} is given
% the page number that will be inserted in the footer is not the page number
% of the page where this command is given, but rather the page number of
% the actual page where the footer is constructed. Of course for the page
% number this is what you expect, but it is also true for other
% commands. There is a difference, however. The page number is
% incremented \emph{after} the page has been constructed. When we have
% our own ``variables'', however, these are usually changed in the
% middle of our text.
%
% As an example we take a book where each chapter is written by a different author.
% If we want the name of the author in the header opposite the chapter
% title, we can use the following commands:
%
% \begin{verbatim}
% \newcommand{\TheAuthor}{}
% \newcommand{\Author}[1]{\renewcommand{\TheAuthor}{#1}}
% \fancyhead[LE,RO]{\TheAuthor}
% \end{verbatim}
%
% \noindent and start each chapter with the command
% \Cmd{Author\{Real Name\}}.
% If, however, the author name would be changed before a page is
% completed the wrong author could come in the header. This would be the case
% if you gave the above command \emph{before} the \cs{chapter} command
% rather than after it. So we give the \cs{Author} command after the
% \cs{chapter} command:
% \begin{verbatim}
% \chapter{Chapter Title}
% \Author{Author Name}
% \end{verbatim}
% As a chapter starts on a new page, we can be sure that the \cs{Author}
% command comes at the same page as the chapter start.
%
% Another source of problems is the fact that \tex/'s output routine processes
% commands ahead, so it may already have processed some commands that produce
% text that will appear on the next page. So if our book was not divided
% into chapters, but into sections, we cannot use the similar system:
% \begin{verbatim}
% %%% NOTE: This may not work %%%%
% \section{Chapter Title}
% \Author{Author Name}
% \end{verbatim}
% because in this case, when this command comes at the end of a page,
% the ``variable'' \cs{TheAuthor} could be set at that page, but then
% \TeX{} could decide to move the section title to the next page. And
% then the author name would appear one page too early. This problem can
% be solved using marks. In fact this is the whole reason the mark
% mechanism was developed in \TeX. See section~\ref{sec:xmarks}.
%
% The same applies to other changes in the middle of a page, e.g.\ to change the page
% numbering from roman to arabic (with \cs{pagenumbering}). For the same
% reason \Cmd{thispagestyle\{mystyle\}} will not always work in the
% middle of a page.
%
% Some of these changes can be accomplished by using the mark
% mechanism as may be seen in \smartref{sec:change}{sec:scoop} and
% \smartref{sec:change}{sec:xmarks}.
%
% In the remainder of this section we look at two different cases of
% changing the page style in the middle of a page: changing the style of
% the current page and changing the style of the next page.
%
% \subsection{Changing the page style of the current page}
%
% So now we are giving an example how to change the headers and footers,
% only on the current page. In some cases this can be done by the
% \CmdIndex{thispagestyle}%
% \cs{thispagestyle} command. This changes the page style for the
% ``current'' page only. But then we may be hit by the problem mentioned
% above. \LaTeX{} may have a different idea about
% the ``current'' page than you. The use of \cs{thispagestyle} is OK if
% you can be sure that the text where the command \cs{thispagestyle} is
% executed is the same page as where the surrounding text appears. So
% for example directly after a \cs{chapter} command, or after a
% \cs{newpage}. However, when the command is given near the end of a
% page, \LaTeX{} may execute the command, and then decide that the page
% is full and move the text that contains the command to the next page.
% So now the page style is changed on one page earlier than was intended.
%
% A good solution to this problem is to put a label, like
% \Cmd{label\{otherpagestyle\}} in the text where you want the different
% page style, and then in the header and/or footer definitions compare
% the page number with the label page number and choose the proper
% value. For example, if we want to replace the section title on the
% special page with ``MYFANCY SECTION'', like in
% \begin{verbatim}
% \fancypagestyle{myfancy}{
%   \fancyhead[LE,RO]{MYFANCY SECTION}
% }
% \end{verbatim}
% ^^A\Example
% we define a new pagestyle that makes the choice:
% \TTindex{ifthen}\TTindex{refcount}
% \begin{verbatim}
% \usepackage{ifthen}
% \usepackage{refcount}
% . . .
% \fancypagestyle{switch}{
%   \fancyhead[LE,RO]{%
%     \ifthenelse{\value{page}=\getpagerefnumber{otherpagestyle}}
%       {MYFANCY SECTION}
%       {\textsl{\rightmark}}}
% }
% \end{verbatim}
% \CmdIndex{ifthenelse}
% where \verb|\textsl{\rightmark}| is the normal value of the header
% field from \Cmd{pagestyle\{fancy\}}.
% Now we choose \Cmd{pagestyle\{switch\}} before our text, or even for
% the whole document.
%
% There can still be some ambiguity on which page gets the different
% header. For example, if the text says:
% \begin{quote}
%   This page gets a different header than the surrounding pages.
% \end{quote}
% where do you put the \cs{label}? \LaTeX{} could break the page between
% ``This'' and ``page'', and then would you want the special heading on
% the page where ``This'' appears, or on the page where ``page''
% appears. It depends on the positioning of the \cs{label} command.
% Probably it is safer to make sure the sentence isn't broken. This can
% be done by putting the text in a \cs{parbox} or \texttt{minipage} environment.
% \begin{verbatim}
% \noindent
% \begin{minipage}{\textwidth}
%   This page should have a different header than the surrounding pages.
%   \label{otherpagestyle}
%   It is done with the \verb|\pagestyle{switch}| command, that
%   has tests in the header field definitions. This chooses the actual
%   header depending on the page number.
% \end{minipage}
% \end{verbatim}
% The \cs{noindent} is necessary, otherwise the whole \texttt{minipage}
% will be shifted right by the paragraph indentation.
%
% Note that you cannot reset the page style immediately after this code,
% as this may still influence the current page. If you want to reset it,
% for example to \Cmd{pagestyle\{fancy\}}, you must be sure that it
% happens on a following page. But in this case it isn't even necessary,
% as the special page style acts as the default on all pages except the
% special page.
%
% The special header and footer in page~\pageref{showstruts}, which
% show the struts are done in a similar way, although the header and
% footer are a bit more elaborated there.
% Also there is another complication there, as we also want to make both
% \cs{headruleskip} and \cs{footrulewidth} dependent on the page number.
% Unfortunately, this cannot be done with a simple \cs{ifthenelse}
% \CmdIndex{ifthenelse}
% command.
% Both \cs{headruleskip} and \cs{footrulewidth} are eventually
% used as length parameters, and this requires that they are
% \emph{expandable}. However, the \cs{ifthenelse} construct is not
% expandable, so you will get strange error messages if you use
% something like
% \begin{verbatim}
% %%% NOTE: This does not work %%%%
% \renewcommand{\footrulewidth}{%
%   \ifthenelse{\value{page}=\getpagerefnumber{otherpagestyle}}{0.4pt}{0pt}%
% }
% \end{verbatim}
% For cases like this \Package{fancyhdr} version~4.0 and later has some
% new commands \cs{fancyheadinit}, \cs{fancyfootinit} and \cs{fancyhfinit}.
% \DescribeMacro{\fancyheadinit}
% With \Cmd{fancyheadinit\{\meta{code}\}} you can define some code that will be executed
% just before the construction of the header. As it is executed in the
% header, it can test the correct page number, because the counter
% \texttt{page} is guaranteed to have the correct value in the headers
% and footers. Similarly, the code in \Cmd{fancyfootinit\{\meta{code}\}} is executed in
% \DescribeMacro{\fancyfootinit}
% the footer. And \Cmd{fancyhfinit\{\meta{code}\}} sets its code for both the header
% \DescribeMacro{\fancyhfinit}
% and the footer. Now we can set for example \cs{headruleskip} or
% \cs{footrulewidth} depending on the page number. So instead of putting
% the test inside the definition of \cs{headruleskip}, we can put it
% outside, and then we can use the command \cs{ifthenelse}. So we put
% the following in \Cmd{pagestyle\{switch\}}\footnote{Assuming we have
% already loaded package \Package{refcount}.}:
% \begin{verbatim}
%   \fancyheadinit{%
%     \ifthenelse{\value{page}=\getpagerefnumber{otherpagestyle}}
%       {\renewcommand{\headruleskip}{4pt}}
%       {\renewcommand{\headruleskip}{0pt}}
%   }
%   \fancyfootinit{%
%     \ifthenelse{\value{page}=\getpagerefnumber{otherpagestyle}}
%       {\renewcommand{\footrulewidth}{0.4pt}}
%       {\renewcommand{\footrulewidth}{0pt}}
%   }
% \end{verbatim}
% Now here is the definition of the page style used for page~\pageref{showstruts}.
% \begin{verbatim}
% \fancypagestyle{showstruts}{%
%   \fancyhead[L]{%
%     \ifthenelse{\value{page}=\getpagerefnumber{showstruts}}%
%       {\strutheader}%
%       {\rightmark}%
%   }
%   \fancyfoot[L]{%
%     \ifthenelse{\value{page}=\getpagerefnumber{showstruts}}%
%       {\strutfooter}%
%       {}%
%   }
%   \fancyheadinit{%
%     \ifthenelse{\value{page}=\getpagerefnumber{showstruts}}%
%       {\renewcommand{\headruleskip}{4pt}}%
%       {\renewcommand{\headruleskip}{0pt}}%
%   }
%   \fancyfootinit{%
%     \ifthenelse{\value{page}=\getpagerefnumber{showstruts}}%
%       {\renewcommand{\footrulewidth}{0.4pt}}%
%       {\renewcommand{\footrulewidth}{0pt}}%
%   }
% }
% \end{verbatim}
% The label used on that page is \texttt{showstruts}. \cs{strutheader}
% and \cs{strutfooter} are macros that contain the code to draw these
% pictures. In this example the values for \cs{headruleskip} and
% \cs{footrulewidth} in the \emph{else} case are the same as the global
% values. So we could have left these \emph{else} parts empty. Then they
% would keep the global values.
% However, often explicit is better than implicit.
%
% These initialisation commands cannot be used to make global changes to
% the page, for example to \cs{headheight}. Neither can you use them to
% change \cs{fancyhead} or \cs{fancyfoot}, because these have already
% been set up. But you can use it to set the color and font of the
% header and/or footer, for example to get large, red text in the
% headers and footers on this specific page:
% \begin{verbatim}
%  \fancyhfinit{%
%    \ifthenelse{\value{page}=\getpagerefnumber{otherpagestyle}}
%      {\color{red}\Large}
%      {}
%  }
% \end{verbatim}
%
% \subsection{\Package{Fancyhdr} hooks}
% \label{sec:hooks}
%
% \LaTeX{} has a system of \emph{hooks}\index{hooks} since the 2020/10/01 release.
% This allows packages and classes (and other \LaTeX{} software) to
% define points in its code where other \LaTeX{} code can insert a piece
% of code. For more details, see  \emph{The \LaTeX{} Companion, Third
% Edition}, part I, pp. 671ff or the documentation that can be read
% with the command `\texttt{texdoc lthooks-doc}'.
%
% \Package{Fancyhdr} version 4.5 or later defines a number of hooks to be executed at the
% beginning or end of the header and/or footer, if your \LaTeX{} version
% supports it. The hooks are defined in
% mirrored pairs, which means the second one of the pair is executed in the
% reverse order compared to the first one (see the hooks documentation).
% \begin{description}
% \item[\texttt{fancyhdr/before}, \texttt{fancyhdr/after}]
% \TTindex{fancyhdr/before}\TTindex{fancyhdr/after}
% these are executed before the
% header or footer is constructed, and after the header or footer is
% finished, respectively.
% \item[\texttt{fancyhdr/head/begin}, \texttt{fancyhdr/head/end}]
% \TTindex{fancyhdr/head/begin}\TTindex{fancyhdr/head/end}
% these are run at the
% beginning and the end of the header construction, respectively
% \item[\texttt{fancyhdr/foot/begin}, \texttt{fancyhdr/foot/end}]
% \TTindex{fancyhdr/foot/begin}\TTindex{fancyhdr/foot/end}
% these are run at the
% beginning and the end of the footer construction, respectively
% \end{description}
%
% The interaction of the hooks and the \cs{fancyhfinit} code described in
% the previous section with the construction of the
% header and footer is as follows: for the header construction
% \begin{itemize}
% \item first the \texttt{fancyhdr/before} hooks are run, then the
% \texttt{fancyhdr/head/begin} hooks, then the \cs{fancyheadinit} code.
% Then the header is constructed. Finally, the
% \texttt{fancyhdr/head/end} hooks are run followed by the
% \texttt{fancyhdr/after} hooks.
% \item For the construction of the footer, it is similar, just replace
% \texttt{head} by \texttt{foot}.
% \item Note that between the construction of the header and the footer,
% \LaTeX{} builds the body of the page. This process consists mainly of
% putting boxes next to each other, and \Package{fancyhdr} does not
% interfere with this, and neither should the hook code.
% \end{itemize}
%
% The reason there are separate \texttt{fancyhdr/before} and
% \texttt{fancyhdr/after} hooks and the \texttt{head} and \texttt{foot}
% hooks, is
% \begin{enumerate}
% \item If you want to use the same hooks for headers and footers, use
% the \texttt{fancyhdr/before} and \texttt{fancyhdr/after} hooks. This
% prevents you to have to specify the same hook code twice.
% \item If you want to have different hooks for the header and footer,
% use the \texttt{head} and \texttt{foot} hooks.
% \end{enumerate}
% The \texttt{after} and \texttt{end} hooks are meant to undo changes
% made in the \texttt{before} and \texttt{begin} hooks, respectively. If
% the hooks make only local changes (which is recommended), the \TeX{}
% grouping mechanism will take care of this, so you can leave out the
% \texttt{after} and \texttt{end} hooks in that case.
%
% At first sight it may seem that the \cs{fancyhfinit} mechanism is no
% longer useful with the introduction of hooks. One reason it exists is
% that hooks were not available at the time it was introduced, and for
% compatibility reasons it remains. However, there are some significant
% differences between the \cs{fancyhfinit} mechanism and the hook
% mechanism, so you should choose carefully which one to use.
% \begin{itemize}
% \item Hooks are global, but the \cs{fancyhfinit} declarations are
% local. That is, if \cs{fancyhfinit} (or its siblings
% \texttt{fancyheadinit} or \cs{fancyfootinit}) are given in a \TeX{}
% group, they last until the end of the group. They will disappear
% outside of the group, or be reset to the value they had outside of the group.
% \item \cs{fancyhfinit} is meant to be used by the user who writes the
% document, i.e. it is meant for the current document.
% \cs{fancyhfinit} \emph{should not be used by package or class writers
% and similar. They should use the hooks mechanism.} On the other hand
% the user can also use hooks in the document instead of, or in addition
% to the \cs{fancyhfinit} mechanism.
% \item Hooks can be added multiple times, but the \cs{fancyhfinit} code
% can only be given once (i.e. a new one overwrites the previous one).
% \item \cs{fancyhfinit} has no corresponding \texttt{exit} function, so
% if you need some code to be executed after the construction of the header or
% footer, you have to use hooks.
% \end{itemize}
%
% \subsection{Changing the page style of the next page}
%
% If you want the change of the page style to take effect
% at the next page you must make sure that the current page is finished. In
% most cases this can be done by issuing a
% \CmdIndex{clearpage}\CmdIndex{newpage}%
% \cs{newpage} or \cs{clearpage} command before % any changes. However,
% this will immediately end the current page, possibly leaving you with a
% half-empty page, which may be undesirable.
%
% If this is not what you want, you can use the
% \TTindex{afterpage.sty}%
% \Package{afterpage} package with:\\[1ex]
% \CmdIndex{afterpage}\Cmd{afterpage\{}\Cmd{fancyhead[L]\{new value\}\}} or\\
% \CmdIndex{pagenumbering}\Cmd{afterpage\{}\Cmd{pagenumbering\{roman\}\}}.
% \\[1ex]
% You cannot use \cs{afterpage}
% to change the \cs{pagestyle} as the commands issued by \cs{afterpage}
% are local in a group, and the \cs{pagestyle} command makes only local
% changes. The \cs{pagenumbering} and the \cs{thispagestyle}
% command make global changes, as well as changes to \LaTeX's counters,
% such as \cs{setcounter} and \cs{addtocounter}.
% So these can be used\footnote{In \Package{fancyhdr} version~3 and
% earlier the commands like \cs{fancyhead} and \cs{fancyfoot} also made
% global changes. This is no longer the case in version~4.0 and later.}.
% Here is an example to change the page style of the next page with \cs{afterpage}:
% ^^A \Example
% \begin{verbatim}
% \usepackage{afterpage}
% \usepackage{fancyhdr}
% \fancypagestyle{myfancy}{
%   \fancyhead[LE,RO]{\textbf{MYFANCY SECTION}}
%   \fancyhead[LO,RE]{\textbf{MYFANCY CHAPTER}}
%   \fancyfoot[C]{\textbf{--~\thepage~--}}
% }
% . . .
% \afterpage{\thispagestyle{myfancy}}
% \end{verbatim}
% Then the page after this code will have the page style \texttt{myfancy}.
%
% \section{Headers and footers induced by the text}
% \label{sec:xmarks}
%
% We have seen how we can use \LaTeX's marks to get information from the
% document contents to the headers and footers. The marks mechanism is the
% only reliable mechanism that you can use to get changing information to the
% headers or footers. This is because \latex/ may be processing your document
% ahead before deciding to break the page.
%
% Sometimes the two marks that \latex/ offers are not enough. An example is
% the following:
% \begin{quote}
%  If a solution to an exercise goes across a page break, then I would like
%  to have ``(Continued on next page\ldots)'' at the bottom of the
% \index{Continued\ldots}
%  first page and ``(Continued\ldots)'' at the top in the margin of the next page.
% \end{quote}
%
% You cannot use \latex/'s mark mechanisms for this if you also want to use
% chapter and section information.
%
% The \Package{extramarks} package gives you
% two extra marks that can be used in this situation.
% Here is a way to use this package:
%
% \begin{verbatim}
% \usepackage{extramarks}
% ...
% \pagestyle{fancy}
% \fancyhead[L]{\firstxmark}
% \fancyfoot[R]{\lastxmark}
% \fancypagestyle{plain}{\fancyhead{}\renewcommand{\headrule}{}}
% ...
% \extramarks{}{}% 1
% \extramarks{Continued\ldots}{Continued on next page\ldots}% 2
% ...
% Some text that may or may not cross a page boundary...
% ...
% \extramarks{Continued\ldots}{}% 3
% \extramarks{}{}% 4
% \end{verbatim}
%
% \CmdIndex{extramarks}
% Note that we redefine the \texttt{plain} page style, so that on the
% first page of a chapter also the footer will be given if necessary. We
% assume that a `Continued' block will not cross chapter boundaries, so no
% header will be necessary on these pages.
% Also the \cs{extramarks} command must be close to the text, i.e no
% empty lines (paragraph boundaries) should intervene. Otherwise the page may
% be broken at that boundary and the extramarks would come on the wrong page.
% The final \verb+\extramarks{}{}+ is to prevent the `Continued\ldots'
% header to appear on the following pages.
%
% Explanation: There are two new marks that can be used in the page layout with this
% package: If commands of the form
% \verb|\extramarks{|$m_1$\verb|}{|$m_2$\verb|}| are given
% \CmdIndex{firstxmark}
% \CmdIndex{lastxmark}
% \cs{firstxmark} gives you the first $m_1$ value and
% \cs{lastxmark} gives you the last $m_2$ value
% of the current page. In the above example, when the complete block
% falls on the same page, the \cs{firstxmark} will be the empty
% parameter of the first \cs{extramarks} command (indicated by \texttt{\%~1}), and
% the \cs{lastxmark} will be the empty parameter from the last
% \cs{extramarks} command (indicated by \texttt{\%~4}).
%
% However, when the page break falls inside the block, the mark generated by
% \texttt{\%~2} will be the last one on the first page. Therefore on that page
% \cs{lastxmark} will be `Continued on next page\ldots'. On the following
% pages, there are two possibilities: (1) when the block ends
% on that page the first mark will be \texttt{\%~3}, therefore
% \cs{firstxmark} will be `Continued\ldots'; (2) the block ends at a
% later page, therefore it does not contribute any marks to that page,
% and the marks are `inherited' from the last values of the previous page,
% i.e., those from \texttt{\%~2}.
% On all of the pages after the block the values of \texttt{\%~4} will be used,
% i.e., empty ones.
% This final \verb+\extramarks{}{}+ is to prevent the `Continued\ldots'
% header to spill over to the following pages.
% Of course in real life you would leave out the numbers.
%
% In case you want the last $m_1$ value or the first $m_2$ value, you
% can use the \cs{lastleftxmark} or \cs{firstrightxmark}, respectively.
% For symmetry reasons there are also commands \cs{firstleftxmark}
% (=\cs{firstxmark}), \cs{lastrightxmark} (=\cs{lastxmark}),
% \cs{topleftxmark} (=\cs{topxmark}) and \cs{toprightxmark}. The
% top-marks are basically the last-marks of the previous page.
% \CmdIndex{lastleftxmark}
% \CmdIndex{firstrightxmark}
% \CmdIndex{firstleftxmark}
% \CmdIndex{lastrightxmark}
% \CmdIndex{topleftxmark}
% \CmdIndex{toprightxmark}
%
% The package also gives you the \cs{firstleftmark} and \cs{lastrightmark}
% commands that complement the standard \latex/ marks.
% \CmdIndex{firstleftmark}
% \CmdIndex{lastrightmark}
%
% To stress the point that marks are the correct way to do this, let me
% give you a ``solution'' that will not work\footnote{Actually there is
%   another way but it requires two \latex/ passes: you can put \cs{label}
%   commands before and after the text and compare the \cs{pageref}s.}:
%
% \begin{verbatim}
% \fancyhead[L]{Continued}
% \fancyfoot[R]{Continued on next page\ldots}
% Some text that may or may not cross a page boundary...
% \fancyhead[L]{}
% \fancyfoot[R]{}
% \end{verbatim}
%
% You may be tempted to think that the first \cs{fancyhead} and \cs{fancyfoot}
% will be in effect when \tex/ breaks the page in the middle of the text,
% and the last ones when the page breaks after the text. This is not true as
% the whole paragraph (including the last definitions) will be processed
% \index{page break}
% before \tex/ considers the page break, so at the time of the page break the
% last definitions are effective, whether the page break occurs inside the text
% or outside of it. Putting a paragraph boundary between the
% text and the last definitions will not work either, because you don't want
% the first definitions to be in effect when \tex/ decides to break the page
% exactly at this boundary. Actually the marks mechanism was invented to get
% rid of these kinds of problems.
%
% In the above example the text ``Continued'' appears in the page header. It
% \index{margin}
% may be nicer to put it in the  margin. This can be easily
% accomplished by positioning it at a fixed place relative to the page header.
% In plain \tex/ you would use a concoction of \Cmd{hbox to 0pt},
% \Cmd{vbox to 0pt}, \cs{hskip},\cs{vskip}, \cs{hss} and
% \cs{vss} but fortunately
% \latex/'s \texttt{picture} environment gives a much cleaner way to do this.
% In order not to disturb the normal header layout we put the text in a zero-sized
% \texttt{picture}. Generally this is the best way to position things on fixed
% places on the page. You can then also use the normal headings. See also
% section~\ref{sec:thumb} for another example of
% this technique.
%
% \TTindex{picture}
% \begin{verbatim}
% \fancyhead[L]{\setlength{\unitlength}{\baselineskip}%
% \begin{picture}(0,0)
%   \put(-2,-3){\makebox(0,0)[r]{\firstxmark}}
%   \end{picture}\rightmark} % \rightmark = section title
% \end{verbatim}
%
% This solution can of course also be used for the footer. Make sure you put the
% \texttt{picture} as the first thing in left-handside entries and last in right-handside
% ones.
%
% Finally you may want to put ``(Continued\ldots)'' in the \emph{text}
% rather than in the header or the margin. Then you have to use the
% \TTindex{afterpage.sty}
% \Package{afterpage} package. We also decide to make a separate
% environment for it.
%
% \begin{verbatim}
% \newenvironment{continued}{\par
%   \extramarks{}{}%
%   \extramarks{(Continued\ldots)}{Continued on next page\ldots}%
%   \afterpage{\noindent\firstxmark\vspace{1ex}}%
%   \ignorespaces
%   }{%
%   \unskip\extramarks{(Continued\ldots)}{}%
%   \extramarks{}{}\par
% }
% \end{verbatim}
%
% Note how we use \cs{ignorespaces}, \cs{unskip} and \texttt{\%} to
% prevent unwanted spaces to creep into the text.
%
% It is a bit dangerous to use \cs{firstxmark} outside the page layout
% routine, but apparently with \cs{afterpage} this works. If you would
% need the information further on in the page you must remember the state of
% the marks in your own variable. You can set this in one of the
% \Package{fancyhdr} fields. For example if you want to add something
% \emph{after} the broken piece of text you can use the following:
%
% \begin{verbatim}
% \newcommand{\mysaved}{}
%
% \newenvironment{continued}{\par
%   \extramarks{}{}%
%   \extramarks{(Continued\ldots)}{Continued on next page\ldots}%
%   \ignorespaces
%   }{%
%   \unskip\extramarks{(Continued\ldots)}{}%
%   \extramarks{}{}\par\vspace{1ex}\mysaved}%
% }
% \fancyhead[L]{\leftmark}
% \fancyhead[C]{\ifthenelse{\equal{\lastxmark}{}}
%   {\gdef\mysaved{}}
%   {\gdef\mysaved{\noindent[Continued from previous page]}}}
% \end{verbatim}
%
% If you want to include one of the marks or other varying information in the
% saved text, you must use \cs{xdef} rather than \cs{gdef}.
%
%
% \section{A movie}
% \label{sec:movie}
%
% \index{movie}
% \TTindex{picture}
% If you put at each page on the same place a picture that slightly changes
% from page to page you can get a movie-like effect by flipping through the
% pages. You can create such a movie easily with fancyhdr. For
% simplicity we assume that we use a PDF-producing \LaTeX{} (such as
% \texttt{pdflatex}) and each picture is in a PNG file called
% \texttt{pic}$\langle n\rangle$.\texttt{png}%
% \footnote{With \texttt{pdflatex} we could also use PDF or JPG
% pictures. With a DVI based \texttt{latex} we could use PS or EPS
% pictures. Or any other supported image format.}
% where $\langle n\rangle$ is
% the page number and that we use the \Package{graphics} or  \Package{graphicx} package.
% \TTindex{graphics}
% \TTindex{graphicx}
% To put the movie in the  righthandside bottom corner the following will work:
%
% \begin{verbatim}
% \fancyfoot[R]{\setlength{\unitlength}{1mm}
%   \begin{picture}(0,0)
%     \put(5,-20){\includegraphics[width=1cm]{pic\thepage}}
%   \end{picture}}
% \end{verbatim}
%
% If the document is two-sided, it would be better to put them only on
% the odd pages, by specifying \verb|\fancyfoot[RO]|.
%
% Notice that the \cs{unitlength} parameter should
% be set locally in the fancyhdr field in order to avoid unwanted
% interference with its value in the text.
%
% \section{Thumb-indexes}
% \label{sec:thumb}
%
% \index{bible}
% Some railroad guides and expensive bibles have so called
% \index{thumb-index}
% \emph{thumb-indexes}, i.e.\ there are marks on the sides of the pages that
% indicate where the chapters are. You can create these by printing black
% blobs in the margin of the pages. The vertical position should be
% determined by the chapter number or some other counter. As the position is
% independent of the contents of the page, we print these blobs as part of
% the header in a zero-sized \texttt{picture} as described in the previous
% section.
%
% Of course we have to take care of two-sided printing, and we may want to
% have an index page with all the blobs in the correct position. The solution
% requires some hand-tuning to get the blobs nicely spaced out vertically.
% For the application that I originally designed this for, there were 12 sections,
% so I made the blobs
% 18 mm apart, i.e., 9~mm blob separated by 9~mm whitespace. In order to avoid
% calculations they are set in a \texttt{picture} environment with the
% \cs{unitlength} set to 18~mm. Page numbers are set in the headers at the
% outer sides, and the blobs are attached to these. In this example the
% section numbers are used to position the blobs, but you can replace this
% with any numeric value.
% See figure~\ref{fig:overview} for the resulting
% overview page and figure~\ref{fig:thumb} for the code.
%
% \begin{figure}[htbp]
% \setlength{\unitlength}{9mm}
% \newcommand{\blob}{\rule[-.2\unitlength]{1\unitlength}{.5\unitlength}}
% \newcounter{line}
% \newcommand{\secname}[1]{\addtocounter{line}{1}%
%   \put(1,-\value{line}){\blob}
%   \put(-7.5,-\value{line}){\arabic{line}}
%   \put(-7,-\value{line}){#1}}
%
% \newcommand{\overview}{1
%   \begin{picture}(0,0)
%     \secname{Introduction}
%     \secname{The first year}
%     \secname{Specialisation}
%   \end{picture}}
%
%   \begin{center}
%     \leavevmode
%     \begin{picture}(11.3,5)
%       \put(0,0){\framebox(11.3,5)[tr]{}}
%       \put(9,4.5){\overview}
%     \end{picture}
%   \end{center}
%   \caption{Thumb-index overview page}
%   \label{fig:overview}
% \end{figure}
% \begin{figure}[hp]\small
% \begin{verbatim}
% \setlength{\unitlength}{18mm}
% \newcommand{\blob}{\rule[-.2\unitlength]{2\unitlength}{.5\unitlength}}
%
% \newcommand\rblob{\thepage
%   \begin{picture}(0,0)
%     \put(1,-\value{section}){\blob}
%   \end{picture}}
%
% \newcommand\lblob{%
%   \begin{picture}(0,0)
%     \put(-3,-\value{section}){\blob}
%   \end{picture}%
%   \thepage}
%
% \pagestyle{fancy}
% \fancyfoot[C]{}
%
% \newcounter{line}
% \newcommand{\secname}[1]{\addtocounter{line}{1}%
%   \put(1,-\value{line}){\blob}
%   \put(-7.5,-\value{line}){\Large \arabic{line}}
%   \put(-7,-\value{line}){\Large #1}}
%
% \newcommand{\overview}{\thepage
%   \begin{picture}(0,0)
%     \secname{Introduction}
%     \secname{The first year}
%     \secname{Specialisation}
% ...etc...
%   \end{picture}}
%
% \begin{document}
% \fancyhead[R]{\overview}\mbox{}\newpage % This produces the overview page
% \fancyhead[R]{} % Front matter may follow here
% \clearpage
% \fancyhead[RE]{\rightmark}
% \fancyhead[RO]{\rblob}
% \fancyhead[LE]{\lblob}
% \fancyhead[LO]{{\leftmark}
% ...
% \end{verbatim}
%   \caption{Thumb-index code}
%   \label{fig:thumb}
% \end{figure}
%
% \section{Float placement}
%
% \textbf{Note: This section is not about \Package{fancyhdr}, but about
% page layout, especially about the placement of floats.}
%
% Floats are page elements that float with respect to the rest of the
% document. Standard floats are tables and figures, but with the
% \TTindex{float}%
% \Package{float} package you can easily make new ones, like algorithms. Most
% of the time floats work satisfactory, but sometimes \LaTeX{} seems too
% stubborn to do what you want. This section describes how you can influence
% \LaTeX{} so that it will do most of the time what you want. There might,
% however, be some pathological cases where it is impossible to convince
% \LaTeX{} to do things your way. In the following we will use figures as an
% example but everything applies to other floats as well.
%
% The most encountered problems with floats are:
% \begin{enumerate}
% \item You want a float at a certain position in the text, but \LaTeX{}
%   moves it, usually to the next page.
% \item From a certain point, \LaTeX{} moves all your floats to the end of
%   the document or the end of a chapter.
% \item \index{Too many floats}%
%   \LaTeX{} complains about ``Too many floats''.
% \end{enumerate}
%
% In the first two cases you must first check if you have given the correct
% ``placement'' parameter to you float, e.g.\ \Cmd{begin\{figure\}[htp]}
% specifies that your figure may be placed either: Here (i.e., in the text
% position where the command is given), on the Top of a page (which may be
% the page where you put the command), or on a separate Page of floats. You
% could also have specified ``\texttt{b}'' for Bottom of the page. The order of the
% letters is insignificant, you cannot force \LaTeX{} to try Bottom first
% and then Top by specifying \texttt{[bt]}.
%
% If \LaTeX{} doesn't put the float at the place where you expected it, it is
% usually caused by the following:
% \begin{enumerate}
% \item The float didn't fit on the page. In this case it has to move to the
%   next page or even further. If you didn't specify either \texttt{[t]} or
%   \texttt{[b]} in the position parameter, \latex/ must save it until it has
%   enough for a page of floats. So don't specify only \texttt{[h]}. If you
%   want to give \latex/ a chance to put the float on a page of floats, you
%   must also specify ``\texttt{p}''.
% \item The placement would violate the constraints imposed by \latex/'s
%   float placement parameters. This is one of the most occurring causes and
%   it can easily be corrected by changing the parameters. Here is a list of
%   them with their default values:
% \end{enumerate}
% \begin{center}
% \CmdIndex{topfraction}
% \CmdIndex{bottomfraction}
% \CmdIndex{textfraction}
% \CmdIndex{floatpagefraction}
% \TTindex{topnumber}
% \TTindex{bottomnumber}
% \TTindex{totalnumber}
%   \begin{tabular}{>{\tt}llc}
%     \toprule
%     \multicolumn{3}{c}{Counters -- change with \cs{setcounter}}\\
%     \midrule
%     topnumber & max. number of floats at top of page & 2 \\
%     bottomnumber & max. number of floats at bottom of page & 1 \\
%     totalnumber &  max. number of floats on a page & 3\\
%     \midrule
%     \multicolumn{3}{c}{Other -- change with \cs{renewcommand}}\\
%     \midrule
%     \bs topfraction & max fraction of page for floats at top & 0.7 \\
%     \bs bottomfraction & max fraction of page for floats at bottom & 0.3 \\
%     \bs textfraction & min fraction of page for text & 0.2 \\
%     \bs floatpagefraction & min fraction of floatpage that should have
%     floats  & 0.5 \\
%     \bottomrule
%   \end{tabular}
% \end{center}
%
% There are also some others for double column floats in two-column documents.
%
% The values in the righthand column are the defaults for the standard
% \latex/ classes. Other classes could use different defaults. As you see
% with the default values a float will not be put in the bottom of a page if
% its height is more than 30\% of the page height. So if you specify \texttt{[hb]} for
% a float which is taller it has to move to a float page. But if it is less
% than 50\% of the page height it will have to wait until some more floats
% are given before a float page can be filled to satisfy the
% \cs{floatpagefraction} parameter. If you have this kind of behaviour you
% can easily adapt the parameters, e.g.\ with:
% \begin{verbatim}
% \renewcommand{\textfraction}{0.05}
% \renewcommand{\topfraction}{0.95}
% \renewcommand{\bottomfraction}{0.95}
% \renewcommand{\floatpagefraction}{0.35}
% \setcounter{totalnumber}{5}
% \end{verbatim}
% You may want to be careful not to make \cs{floatpagefraction} too small,
% otherwise you may get too many small floatpages.
%
% You can force \latex/ to ignore most of the parameters for one specific float
% occurrence by
% including an exclamation mark (!) in the placement parameters, e.g.,
% \begin{verbatim}
% \begin{figure}[!htb]
% \end{verbatim}
%
% Floats which contain a ``\texttt{t}'' in the position parameter could be
% placed before the place where they are referenced (but on the same page).
% This is normal behaviour for \latex/ but some people just don't like it.
% There are a number of ways to prevent this:
% \begin{enumerate}
% \item Of course deleting the ``\texttt{t}'' will help, but in general this is
%   undesirable, as you may want the float to be placed at the top of the
%   next page.
% \item use the \Package{flafter} package which causes floats never to be
%   placed ``backwards''.
% \item use the command \cs{suppressfloats[t]}.  This
%   command will cause floats for the top position \emph{on this page} to be
%   moved to the next page. This can also be done with \texttt{[b]} or
%   without parameter for all floats on this page.
% \end{enumerate}
%
% If in spite of all your attempts \latex/ still moves your floats to the end
% of the document or the end of a chapter, you can insert a \cs{clearpage}
% command. This will start a new page and insert all pending floats before
% continuing. If it is undesirable to have a pagebreak you can use the
% \Package{afterpage} package and the following command:
% \TTindex{afterpage}\CmdIndex{afterpage}\CmdIndex{clearpage}%
% \begin{verbatim}
% \afterpage{\clearpage}
% \end{verbatim}
%
% This will wait until the current page is finished and then flush all
% outstanding floats. In some pathological circumstances \Package{afterpage}
% may give strange results, however.
%
% Finally, if you want a float only at the place where you define it, without
% \latex/ moving it whatsoever, you can use the \Package{float} package and
% give the command:
% \TTindex{float}\CmdIndex{restylefloat}%
% \begin{verbatim}
% \restylefloat{figure}
% \end{verbatim}
%  in the preamble. Now you will be able to
% specify \texttt{[H]} as the position parameter, which will mean ``HERE
% and only HERE''. This may cause an unwanted page break however.
% If you want to avoid the unwanted pagebreak, i.e., let
% \LaTeX{} move the float only if it doesn't fit on the page, then use the
% \Package{afterpage} package with:
% \TTindex{afterpage}\CmdIndex{afterpage}\CmdIndex{clearpage}%
% \begin{verbatim}
% \afterpage{\clearpage \begin{figure}[H] ... \end{figure}}
% \end{verbatim}
%
% Complaints from \latex/ about ``Too many floats'' are usually caused by one
% of the above problems: floats not being able to be placed and \latex/
% collecting too many of them. The solutions given above, especially those
% with \cs{clearpage} in them will usually help. In some cases there
% really are too many floats, as \latex/ has a limited number of ``boxes'' to
% store the floats. The package
% \TTindex{morefloats}%
% \Package{morefloats} can be used to increase
% this number. If you need still more then you must edit a private copy of
% this file, but even then there will be some limit that you cannot pass.
% Then your only resort will be to change your document.
%
% A much more elaborate article about float placement by Frank
% Mittelbach appeared in 2014 in TUGboat\footnote{%
% Frank Mittelbach, \emph{How to influence the position of float
% environments like figure and table in LATEX?}, TUGboat, Volume 35
% (2014), No. 3, pp. 248–254.\\
% \url{https://www.latex-project.org/publications/2014-FMi-TUB-tb111mitt-float-placement.pdf}
% \\Also on Stackexchange:\\
%  \url{https://tex.stackexchange.com/questions/39017/how-to-influence-the-position-of-float-environments-like-figure-and-table-in-lat}}.
%
% \section{Multipage Floats}
%
% \LaTeX's floats cannot be split across pages. Sometimes, however, you want
% to have a table or figure that doesn't fit on one page. The easiest way is
% to split these into multiple table or figure environments, but this has a
% number of undesirable effects:
% \begin{itemize}
% \item Where do you split it? This is generally a more difficult decision
%   for tables than for figures.
% \item How do you keep them together?
% \item You don't want more than one entry in the list of figures/tables.
% \end{itemize}
%
% Although these problems are not fully solvable in all cases, here are a
% couple of suggestions:
%
% \subsection{Tables}
%
% For tables longer than a page you can use the \Package{longtable} package.
% \TTindex{longtable}
% This package defines a \texttt{longtable} environment that is a kind of
% amalgamation of \texttt{table} and \texttt{tabular}. It has approximately
% the same syntax as the  \texttt{tabular} environment, but it adds some
% features of \texttt{table}, like captions. Longtables will be automatically
% split when they don't fit on the page. And they will be entered in the list
% of tables when a caption is given. They will not float, however, and cannot
% be used inside a float environment. This could mean that another
% \texttt{table} environment, which was defined before the
% \texttt{longtable}, will float past it, and therefore the numbers may get
% out of order. Another problem could be that the \texttt{longtable} starts
% rather far down the page, which isn't a pleasant sight. If you want the
% \texttt{longtable} to start at the top of the page, the best thing to do is
% to include it in an \cs{afterpage} command (using the \Package{afterpage}
% package). As a \texttt{longtable} is by definition large, it is best to put
% it in a separate file, and \cs{input} it in the \cs{afterpage} command:
% \CmdIndex{afterpage}\TTindex{afterpage}\CmdIndex{clearpage}%
% \begin{verbatim}
% \afterpage{\input{mytable}}
% \end{verbatim}
% \begin{verbatim}
% \afterpage{\clearpage\input{mytable}}
% \end{verbatim}
% The last form has the additional advantage that most of the outstanding
% floats will be printed first.
%
%
% \subsection{Figures}
%
% There isn't an equivalent ``\texttt{longfigure}'' solution, so for figures you
% will have to split yourself. In general this is less of a
% problem. However, the problem you get now is how to keep them together,
% i.e., how to get the parts on subsequent pages, and how to get a single
% entry in the list of figures.
%
% You will have to split the figure into pieces and put each part
% in a separate \texttt{figure} environment. To keep them together it is best
% to use only the \texttt{[p]} placement, so that they will be put on
% floatpages. As they are bigger than a page this is appropriate. The first
% part would then get a \cs{caption}, the subsequent parts would be used
% without a caption, or a caption that will not go to the list of figures.
% If you want to add a caption-like text, enter it as
% normal text rather than a \cs{caption}, so that it will not be entered in
% the list of figures. It may also be desirable to issue a \cs{clearpage}
% first, just like we did for the \texttt{longtable}, and to encapsulate this
% in the \cs{afterpage} command. E.g.,
% \begin{verbatim}
% \afterpage{\clearpage\input{myfigure}}
% \end{verbatim}
% where \texttt{myfigure.tex} contains:
% \begin{verbatim}
% \begin{figure}[p]
% \includegraphics{myfig1.eps}
% \caption{This is a multipage figure}
% \label{fig:xxx}
% \end{figure}
% \begin{figure}[p]
% \includegraphics{myfig2.eps}
% \begin{center}
% Figure~\ref{fig:xxx} (continued)
% \end{center}
% \end{figure}
% \end{verbatim}
%
% You have to make sure that the last part is big enough, otherwise \LaTeX{}
% could decide to postpone it until it has collected some more floats. This
% can be done either by making the figure big enough (e.g.\ by adding some
% \cs{vspace}), or by tweaking the \cs{floatpagefraction}
% \CmdIndex{floatpagefraction} parameter.
%
% If you want your multipage figure to start at a lefthand-side
% (even-numbered) page you can use a test in the \cs{afterpage} command
% (using the \Package{ifthen} package):
% \CmdIndex{afterpage}
% \CmdIndex{ifthenelse}
% \begin{verbatim}
% \afterpage{\clearpage
% \ifthenelse{\isodd{\value{page}}{\afterpage{\input{myfigure}}} % odd page
%     {\input{myfigure}}}} % even page
% \end{verbatim}
% If there are too many floats on the skipped page, this may still fail to
% start your multipage figure on an even page, however.
%
% \section{Deprecated commands}
% \label{sec:depr}
%
% This section contains the description of deprecated commands. These
% were parts of the original implementation of \Package{fancyheadings}.
% They continue to work for compatibility reasons,
% but it is recommended not to use them anymore. This description is
% given so that you know what they mean and how to convert them to the
% standard commands. To be honest, I use these sometimes myself in quick
% examples, because \cs{lhead} is less typing than \Cmd{fancyhead[L]}.
%
% These commands for specifying the header or footer fields and their translation to
% the modern commands are given in table~\ref{tab:depr}.
%
% \begin{table}[h!t]
% \CmdIndex{lhead}
% \CmdIndex{chead}
% \CmdIndex{rhead}
% \CmdIndex{lfoot}
% \CmdIndex{cfoot}
% \CmdIndex{rfoot}
%   \begin{tabular}{ll}
%   \toprule
%   \Cmd{lhead\{xx\}} & \Cmd{fancyhead[L]\{xx\}} \\
%   \Cmd{lhead[xx]\{yy\}} & \Cmd{fancyhead[LE]\{xx\}} \Cmd{fancyhead[LO]\{yy\}} \\
%   \Cmd{chead\{xx\}} & \Cmd{fancyhead[C]\{xx\}} \\
%   \Cmd{chead[xx]\{yy\}} & \Cmd{fancyhead[CE]\{xx\}} \Cmd{fancyhead[CO]\{yy\}} \\
%   \Cmd{rhead\{xx\}} & \Cmd{fancyhead[R]\{xx\}} \\
%   \Cmd{rhead[xx]\{yy\}} & \Cmd{fancyhead[RE]\{xx\}} \Cmd{fancyhead[RO]\{yy\}} \\
%   \midrule
%   \Cmd{lfoot\{xx\}} & \Cmd{fancyfoot[L]\{xx\}} \\
%   \Cmd{lfoot[xx]\{yy\}} & \Cmd{fancyfoot[LE]\{xx\}} \Cmd{fancyfoot[LO]\{yy\}} \\
%   \Cmd{cfoot\{xx\}} & \Cmd{fancyfoot[C]\{xx\}} \\
%   \Cmd{cfoot[xx]\{yy\}} & \Cmd{fancyfoot[CE]\{xx\}} \Cmd{fancyfoot[CO]\{yy\}} \\
%   \Cmd{rfoot\{xx\}} & \Cmd{fancyfoot[R]\{xx\}} \\
%   \Cmd{rfoot[xx]\{yy\}} & \Cmd{fancyfoot[RE]\{xx\}} \Cmd{fancyfoot[RO]\{yy\}} \\
%   \bottomrule
% \end{tabular}
% \caption{Deprecated commands and their translation\label{tab:depr}}
% \end{table}
%
% As you see, if there is an optional parameter, this one applies to the
% even pages, whereas the required parameter applies to the odd pages. Of
% course this only works if the \texttt{twoside} option is given in the
% documentclass. If there is no optional parameter, the required
% parameter applies to both even and odd pages.
%
% \CmdIndex{fancyplain}
% \PSindex{fancyplain}
% There was also a special pagestyle \texttt{fancyplain} that could be
% used to define both the pagestyle \texttt{fancy} and to redefine the
% pagestyle \texttt{plain} at the same time. In order to use that you say
% \begin{verbatim}
% \pagestyle{fancyplain}}
% \end{verbatim}
% and then in the headers/footers you use for example:
% \begin{verbatim}
% \fancyhead[L]{\fancyplain{value for `plain' page}{value for other pages}}}
% \end{verbatim}
%
% The \cs{fancyplain} command is only useful within the pagestyle \texttt{fancyplain}.
% Nowadays you would just redefine pagestyle \texttt{plain} with the
% \Cmd{fancypagestyle\{plain\}\{xxxx\}} command (see section~\ref{sec:pagestyle-plain}).
%
% \CmdIndex{plainheadrulewidth}
% \CmdIndex{plainfootrulewidth}
% There are also \cs{plainheadrulewidth} and \cs{plainfootrulewidth}
% commands to define the values of \cs{headrulewidth} and
% \cs{footrulewidth} to be used on `\texttt{plain}' pages. This also
% only works with the pagestyle \texttt{fancyplain}, not when you
% redefine pagestyle \texttt{plain} with the \cs{fancypagestyle} command.
%
% \section{Contact information}
%
% Pieter van Oostrum\\
% E-mail: pieter@vanoostrum.org \\
% WWW: http://pieter.vanoostrum.org
% \\[1ex]
% The source code can be found on Github:\\
% \url{https://github.com/pietvo/fancyhdr}\\
% Bugs and suggestions for improvements can be reported at\\
% \url{https://github.com/pietvo/fancyhdr/issues}\\
% Example files can be found at\\
% \url{https://github.com/pietvo/fancyhdr-examples}
%
% \section{Version information}
% \begin{itemize}
% \item  Version 1.0. March 11,  2003. This is the version that was distributed for a
%   long time on CTAN. Version history before this has been lost.
% \item Version 2.0. August 27, 2016:
%   \begin{itemize}
%   \item Removed references to fixmarks.sty as that is no longer used.
%   \item References to older \LaTeX{} versions removed.
%   \item Removed obsolete source code of \Package{extramarks.sty}
%   \item Changed font commands to \cs{textbf} and \cs{textsl}.
%   \item Added description of the \Cmd{fancy\ldots offset} commands.
%   \item Added various \Cmd{\ldots xmark} commands from \Package{extramarks.sty}.
%   \item Various corrections applied.
%   \item Updated contact information.
%   \item Added Version information. :)
%   \end{itemize}
% \item Version 2.1. August 28, 2016
%   \begin{itemize}
%   \item Explain what the top-marks are.
%   \end{itemize}
% \item Version 2.1. Sept. 6, 2016
%   \begin{itemize}
%   \item Add \verb|\string| to special indexing commands to get a neater index file.
%   \item Add a decorative headrule example.
%   \end{itemize}
% \item Version 3.9, October 13, 2016.
%   \begin{itemize}
%   \item Documentation integrated in \texttt{fancyhdr.dtx}.
%   \item Version number unified with \Package{fancyhdr.sty}.
%   \item All deprecated commands moved to a separate section (\ref{sec:depr}).
%   \item Documentation expanded.
%   \end{itemize}
% \item Version 3.9a, June 30, 2017.
%   \begin{itemize}
%   \item Updated contact information.
%   \item Restore \cs{newtoks}\cs{@temptokenb}
%   \end{itemize}
% \item Version 3.10, Januari 25, 2019
%   \begin{itemize}
%   \item Distribution based on fancydhr.dtx.
%   \item Use \cs{f@nch@ifundefined} instead of \cs{ifx} or \cs{@ifundefined}.
%   \item Replace \cs{def} with \cs{newcommand} in several places.
%   \item Don't use \cs{global}\cs{setlength}.
%   \item Put \cs{footrule} in a \cs{vbox} to accommodate for flexible
%     footrules, and then \cs{unvbox} that. Move the \cs{footruleskip}
%     vertical space outside of the definition of \cs{footrule}.
%   \end{itemize}
% \end{itemize}
% \subsection{Changes in version 4}
% \label{sec:version-4}
% Version 4 is a significant rewrite of the package. It also introduces
% a number of new features.
% \begin{itemize}
% \item Version 4.0, March 15, 2019--Jan 04, 2021
%   \begin{itemize}
%   \item Options introduced on the \cs{usepackage} command.
%   \item The check whether the header or footer fits in
%     \cs{headheight} and \cs{footskip}, respectively, no longer
%     adjusts these values for the following pages. This appeared to be too
%     confusing. However, when the package option \texttt{compatV3} is given, the old
%     behaviour is kept. \\
%     The \texttt{nocheck} option now eliminates these checks completely, on
%     your own risk. (See section~\ref{sec:warning} on page~\pageref{page:warning}.)
%   \item Eliminated global definitions. All definitions are now local.
%     The \cs{global} case was originally so that you could do definitions in
%     a group and they would be applied globally. This was a mistake. If
%     you make them locally they should stay local. And it caused
%     problems with switching page styles, because then the global style
%     would be changed, which you generally don't want.\\
%     However, when the package option \texttt{compatV3} is given, the old
%     behaviour is kept. (See section~\ref{sec:options}.)
%   \item The page style \texttt{fancydefault}.
%   \item The \cs{headruleskip} parameter.
%   \item The \cs{fancyheadinit}, \cs{fancyfootinit}, and
%     \cs{fancyhfinit} commands.
%   \item[] \textbf{Note:} The following changes were mostly copied from the
%     \texttt{nccfancyhdr} package by Alexander I. Rozhenko.
%   \item The \cs{fancycenter} command (section~\ref{sec:fancycenter}).
%   \item The \texttt{headings} and \texttt{myheadings} package options
%     (see section~\ref{sec:options}).
%   \item The \cs{fancypagestyle} command has an optional parameter \oarg{base-style}.
%
%   \end{itemize}
%
% \item Version 4.0.1, Jan 28, 2021
%   \begin{itemize}
%   \item Some documentation corrections, especially in sections
%     \ref{sec:xmarks} and \ref{sec:movie}.
%   \end{itemize}
% \item Version 4.0.2, May 9, 2022
%   \begin{itemize}
% \item Added \cs{leavevmode}\cs{ignorespaces} to each header/footer
%   field. The \cs{leavevmode} prevents a bug when a field starts with a
%   \cs{color} command. The \cs{ignorespaces} skips initial spaces in
%   the parameter, as is usual in a \cs{parbox}, for backwards
%   compatibility. However, there are some rare cases where spurious
%   spaces can still show up in the header/footer fields. In that case
%   the user will have to eliminate these.
% \item Cleanup the documentation of the \cs{fancycenter} command.
% \item Miscellaneous small documentation changes.
% \item Make \cs{fancyhead} etc. \cs{long}.
%   \end{itemize}
% \item Version 4.0.3, May 18, 2022
%   \begin{itemize}
%   \item Initialize \cs{@mkboth} in \texttt{extramarks.sty} so that
%     it will pick up changes to \cs{markboth}.
%   \end{itemize}
% \item Version 4.1, Sept 6-Nov 9, 2022
%   \begin{itemize}
%   \item Implement \texttt{twoside} package option to allow two-sided headers
%     and footers in one-sided documents.
%   \item Make \Package{fancyhdr} compatible with the document class \Package{newlfm}.
%   \item Make \cs{nouppercase} compatible with newer definitions of \cs{MakeUppercase}.
%   \end{itemize}
% \item Version 4.2, April 19-23, 2024
%   \begin{itemize}
%   \item Reset catcodes to their default values in order to facilitate
%         \cs{input} in headers/footers when \texttt{verbatim} is active.
%         (Issue \# 8 \url{https://github.com/pietvo/fancyhdr/issues/8}.)
%   \end{itemize}
% \item Version 4.3, July 17, 2024
%   \begin{itemize}
%   \item Changed \cs{f@nch@everypar}. If the LaTeX kernel has
%     \texttt{expl3}, use \cs{tex\_everypar:D}, and reset \cs{par},
%     \cs{@@par} and \cs{endgraf} to their original \TeX{} definitions, so that
%     no paragraph hooks will intrude in \Package{fancyhdr} code\footnote
%     {See \url{https://tex.stackexchange.com/q/691262/113546}}.
%     Therefore paragraph hooks will not work inside \Package{fancyhdr} headers and
%     footers to avoid unwanted interactions with the main text.
%   \end{itemize}
% \item Version 4.3.1, July 23, 2024
%   \begin{itemize}
%   \item Also reset \cs{everypar} to its original \TeX{} value
%     \cs{tex\_everypar:D} in \cs{f@nch@resetpar}, otherwise environments
%     based on \cs{trivlist} will not work properly in \Package{fancyhdr}
%     headers and footers.
%   \end{itemize}
% \item Version 4.4, Nov 20, 2024
%   \begin{itemize}
%   \item Add setting the new style marks for \cs{leftmark}
%     (\texttt{2e-left}) and \cs{rightmark} (\texttt{2e-right} and
%     \texttt{2e-right-nonempty}) in \Package{extramarks.sty}.
%   \end{itemize}
% \item Version 4.5, Nov 21-Dec 5, 2024
%   \begin{itemize}
%   \item \Package{extramarks}: Don't redefine \cs{leftmark} and \cs{rightmark} in
%   \LaTeX{} kernel 2025-06-01 and later.
%   \item \Package{fancyhdr}: use a better method to disable paragraph
%   hooks than the v4.3 code.
%   \item \Package{extramarks}: add commands \cs{extramarksleft} and
%   \cs{extramarksright}.
%   \item \pkg{fancyhdr}: added hooks.
%   \end{itemize}
% \end{itemize}
%
%
%
% \StopEventually{%
% \PrintChanges
% \PrintIndex}
%
% \part{Questions \& Answers}
%
% This part contains answers to questions that have been emailed to me,
% or have been asked at various internet forums, and don't have a
% logical place in the other documentation. It is expected to grow
% gradually.
%
%
% \section{Long chapter/section titles}
% \label{sec:longtitles}
%
% \index{long titles}
% Sometimes a chapter or section title is too long to fit in the header
% or footer. It may take more than one line in the header/footer, or it
% may overwrite other parts. How can we shorten these titles in the
% header/footer without changing the actual title?
%
% Here is an example:
% \begin{verbatim}
% \fancyhead[LE,RO]{\nouppercase{\rightmark}} % Section title
% \fancyhead[LO,RE]{\nouppercase{\leftmark}} % Chapter title
% \fancyfoot[C]{\thepage}
%  . . .
% \chapter{This is a very long chapter title}
%  . . .
% \section{This is a very long section title that will not fit in the header}
%  . . .
% \end{verbatim}
% With these settings the header will come out as:
%
% \medskip
% {\noindent\hbox to \textwidth{^^A
%    \rlap{\parbox[b]{\textwidth}{\raggedright Chapter 1. This is a very long chapter title}}^^A
%    \hfill
%    \llap{\parbox[b]{\textwidth}{\raggedleft 1.2. This is a very long
%                   section title that will not fit in the header}}^^A
%  }
%  \hrule height\headrulewidth width\textwidth}
% \bigskip
% \noindent which isn't very nice.
% There are basically three options to solve this problem.
%
% \subsection{Using optional arguments}
%
% As we have seen in section~\ref{sec:scoop}, the header info comes from
% the marks. So if we want the text in the header to be shorter we have
% to supply shorter marks. This can be done by giving these as optional
% arguments in the \cs{chapter} and \cs{section} commands.\footnote{At
% least in the \texttt{book} and \texttt{report} documentclasses. In the
% \texttt{article} class this would be the \cs{section} and
% \cs{subsection} commands.}
% \begin{verbatim}
% \chapter[Short chapter title]{This is a very long chapter title}
%  . . .
% \section[Short section title]
%         {This is a very long section title that will not fit in the header}
% \end{verbatim}
% The short titles will now appear in the header. However, these will
% also appear in the table of contents. If that is what you want then
% you are ready. But if you want to use the long titles in the table of
% contents, you have to use some trickery. In particular you have to
% supply the marks yourself.
%
% \subsection{Using explicit marks}
%
% First we show how you can supply a different value for the chapter
% title in the heading, because this is the easiest. Remember from
% section~\ref{sec:scoop} that this mark is defined by calling
% \cs{chaptermark}\CmdIndex{chaptermark}. Also, because it is used as \cs{leftmark}, the last
% value of this mark on the page is used. So we can easily overrule the
% value that is supplied by the \cs{chapter} command, by supplying an
% additional \cs{chaptermark} command after the \cs{chapter} command,
% like this:
% \begin{verbatim}
% \chapter{This is a very long chapter title that does not fit in the header}
% \chaptermark{This is a not so long chapter title}
% \end{verbatim}
% For the section titles the situation is more complicated. Here we use
% the \cs{rightmark}, which uses the first mark of its kind on the page.
% So you might think putting a \cs{sectionmark}\CmdIndex{sectionmark} before the \cs{section}
% command would be the solution. Unfortunately, it is not that simple.
% In many cases, this will work, but not when there is a page break just
% before the section title, because in that case the \cs{sectionmark}
% will stay behind on the previous page. However, we can put the
% \cs{sectionmark} inside the argument of the \cs{section} command.
% Because \LaTeX{} first typesets the title (which will execute the
% included \cs{sectionmark} command), and after that executes its own
% \cs{sectionmark}, our \cs{sectionmark} will be the first. But
% there is one case in which this fails: if the next page does not have any
% \cs{sectionmark} commands, it will inherit the \textbf{last} mark from the page
% before it, which will be the long title. To correct this we must also
% give an additional \cs{sectionmark} with the short title
% \textbf{after} the \cs{section} command.
%
% As if this isn't enough, there is still a problem with this setup. Our
% section title is not only used to typeset the title in the text, but
% it is also included in the table of contents. But the table of
% contents does not accept a \cs{sectionmark} in its title. It will
% generate an ugly error message. To prevent this we must give the long
% title (that we want to appear in the table of contents) also as the
% optional argument to the \cs{section} command. Of course this will
% also generate a mark for the header, but this will be overruled by
% our included \cs{sectionmark} commands
%
% So the complete code would be:
% \begin{verbatim}
% \section[Long title]{Long title\sectionmark{Short title}}
% \sectionmark{Short title}
% \end{verbatim}
% To avoid all the repetitions, it is better to make a macro:
% \begin{verbatim}
% \newcommand{\Section}[2]{\section[#1]{#1\sectionmark{#2}}\sectionmark{#2}}
%  . . .
% \Section{Text title}{Header title}
% \end{verbatim}
% And if you want to use yet a different text in the table of contents,
% you can make a macro with three parameters. The third parameter is the
% text to be put in the table of contents. We use this parameter as the
% optional argument for the \cs{section} command.
% \begin{verbatim}
% \newcommand{\Sectioniii}[3]{\section[#3]{#1\sectionmark{#2}}\sectionmark{#2}}
%  . . .
% \Sectioniii{Text title}{Header title}{TOC title}
% \end{verbatim}
% Please note that if you use the \texttt{article} class, instead of
% \cs{chaptermark} and \cs{sectionmark}, you would probably use
% \cs{sectionmark} and \cs{subsectionmark}.
%
% \subsection{Using automatic truncation}
%
% For this solution we use the \Package{truncate} package by Donald
% Arseneau. This has a \cs{truncate}\CmdIndex{truncate} command that
% truncates a text to a maximum size, when it exceeds that size. We put
% both headers in \cs{truncate} to limit it to half the \cs{headwidth}.
% Of course it is also possible to make asymmetric arrangements.
% \begin{verbatim}
% \usepackage[fit]{truncate}
% \fancyhead[LE,RO]{\nouppercase{\truncate{0.5\headwidth}{\rightmark}}}
% \fancyhead[LO,RE]{\nouppercase{\truncate{0.5\headwidth}{\leftmark}}}
% \end{verbatim}
% We don't have to make any changes to the chaper and section titles
% because \cs{truncate} will take care of this.
% This arrangement gives the following header when both titles are too
% big, like in the example above:
%
% \medskip
% {\noindent\hbox to \textwidth{^^A
%    \truncate{0.5\textwidth}{Chapter 1. This is a very long chapter title that does not fit in the header}^^A
%    \hfill
%    \truncate{0.5\textwidth}{1.2. This is a very long section title that will not fit in the header}^^A
%  }
%  \hrule height\headrulewidth width\textwidth}
% \bigskip
%
% Note that we have used the \texttt{[fit]} option of the
% \Package{truncate} package. Otherwise the right header will not be
% right aligned, but it will start at halfway the header.
% Note also that, as each part can occupy half of the available width,
% they could theoretically touch each other. This can be prevented by
% making the widths slightly smaller. And when there is only one title
% in the header, you can make the width equal to or slightly smaller
% than \cs{headwidth}. A more sophisticated solution would be to check
% if one of the header parts is small enough and then truncate the other
% one for the remaining space.
%
% \section{I lost my chapter/section titles}
%
% Some time ago I got a question like this (edited to get the
% essentials):
%
% ``I redefined the \Cmd{pagestyle\{fancy\}} to get my own kind of headings. Also, I
% redefined the \cs{chaptermark}.
% I need the \texttt{fancy} style from chapter 1 and on (mainmatter part), but, until the Introduction
% chapter (that I included into the frontmatter part) I need the \texttt{myheadings}\PSindex{myheadings} style.
%
% When I set the \texttt{myheadings} style into
% the frontmatter the \texttt{fancy} style doesn't show the chapter title any more.
%
% What can I do in order to reestablish the right behavior of the
% \texttt{fancy} style?''
%
% The solution to this problem is actually very simple. The pagestyle
% \texttt{myheadings} (as well as \texttt{headings}\PSindex{headings}) redefines the
% \cs{chaptermark} and \cs{sectionmark}, so when you return to pagestyle
% \texttt{fancy}, the definitions you had given before (or the ones that
% \Package{fancyhdr} provided) are lost. You
% just have to repeat them at the point where you switch back to
% pagestyle \texttt{fancy}.
%
% \begin{verbatim}
% \begin{document}
% \frontmatter
% \pagestyle{myheadings}
%  . . .
% \mainmatter
% \pagestyle{fancy}
% \renewcommand{\chaptermark}[1]{....}
% \end{verbatim}
%
%
% \newpage
% \part{Implementation}
%
% \section{fancyhdr.sty}
%
%<*fancyhdr>
% \changes{fancyhdr v1.4}{1994/09/16}{Correction for use with \cs{reversemarginpar}}
%
% \changes{fancyhdr v1.5}{1994/09/29}{Added the \cs{iftopfloat},
% \cs{ifbotfloat} and \cs{iffloatpage} commands}
%
% \changes{fancyhdr v1.6}{1994/10/04}{Reset single spacing in headers/footers for use with
% \Package{setspace.sty} or \Package{doublespace.sty}}
%
% \changes{fancyhdr v1.7}{1994/10/04}{Changed \cs{let}\cs{@mkboth}\cs{markboth} to
% \texttt{\cs{def}\cs{@mkboth}\{\cs{protect}\cs{markboth}\}} to make it more robust.}
%
% \changes{fancyhdr v1.8}{1994/12/05}{corrections for
% \Package{amsbook}/\Package{amsart}: define \cs{@chapapp} and (more
% importantly) use the \cs{chapter/sectionmark} definitions from \texttt{ps@headings} if
% they exist (which should be true for all standard classes).}
%
% \changes{fancyhdr v1.9}{1995/03/31}{The proposed
% \texttt{\cs{renewcommand}\{\cs{headrulewidth}\}} \texttt{\{\cs{iffloatpage}\ldots}
% construction in the doc did not work properly with the \texttt{fancyplain} style.}
%
% \changes{fancyhdr v1.91}{1995/06/01}{The definition of \cs{@mkboth} wasn't
% restored on subsequent \texttt{\cs{pagestyle}\{fancy\}}'s.}
%
% \changes{fancyhdr v1.92}{1995/06/01}{The sequence
% \texttt{\cs{pagestyle}\{fancyplain\} \cs{pagestyle}\{plain\}
% \cs{pagestyle}\{fancy\}} would erroneously select the plain version.}
%
% \changes{fancyhdr v1.93}{1995/06/01}{\cs{fancypagestyle} command added.}
%
% \changes{fancyhdr v1.94}{1995/12/11}{(suggested by Conrad Hughes
% \texttt{<chughes@maths.tcd.ie!>}): added \cs{footruleskip} to allow control over footrule
% position (old hardcoded value of .3\cs{normalbaselineskip} is far too high
% when used with very small footer fonts).}
%
% \changes{fancyhdr v1.95}{1996/01/31}{call \cs{@normalsize} in the reset code if that is defined,
% otherwise \cs{normalsize}. This is to solve a problem with
% \Package{ucthesis.cls}, as this doesn't define \cs{@currsize}.
% Unfortunately for latex209 calling \cs{normalsize} doesn't
% work as this is optimized to do very little, so there \cs{@normalsize} should
% be called. Hopefully this code works for all versions of LaTeX known to
% mankind.}
%
% \changes{fancyhdr v1.96}{1996/04/25}{Initialise \cs{headwidth} to a
% magic (negative) value to catch most common cases that people change
% it before calling \texttt{\cs{pagestyle}\{fancy\}}.
% Note it can't be initialised when reading in this file, because
% \cs{textwidth} could be changed afterwards. This is quite probable.
% We also switch to \cs{MakeUppercase} rather than \cs{uppercase} and introduce a
% \cs{nouppercase} command for use in headers. and footers.}
%
% \changes{fancyhdr v1.97}{1996/05/03}{Two changes: \\
% 1. Undo the change in version 1.8
% (using the \texttt{\cs{pagestyle}\{headings\}} defaults
% for the chapter and section marks). The current version of amsbook and
% amsart classes don't seem to need them anymore. Moreover the standard
% \LaTeX{} classes don't use \cs{markboth} if twoside isn't selected, and this is
% confusing as \cs{leftmark} doesn't work as expected.\\
% 2. Include a call to \cs{ps@empty}
% in \cs{ps@@fancy}. This is to solve a problem
% in the amsbook and amsart classes, that make global changes to \cs{topskip},
% which are reset in \cs{ps@empty}. Hopefully this doesn't break other things.}
%
% \changes{fancyhdr v1.98}{1996/05/07}{Added \% after the line  \cs{def}\cs{nouppercase}}
%
% \changes{fancyhdr v1.99}{1996/05/07}{This is the alpha version of fancyhdr 2.0\\
% Introduced the new commands \cs{fancyhead}, \cs{fancyfoot}, and \cs{fancyhf}.
% Changed \cs{headrulewidth}, \cs{footrulewidth}, \cs{footruleskip} to
% macros rather than length parameters, In this way they can be
% conditionalized and they don't consume length registers. There is no need
% to have them as length registers unless you want to do calculations with
% them, which is unlikely. Note that this may make some uses of them
% incompatible (i.e., if you have a file that uses \cs{setlength} or \cs{xxxx}!=)}
%
% \changes{fancyhdr v1.99a}{1996/05/10}{Added a few more \% signs.}
%
% \changes{fancyhdr v1.99b}{1996/05/10}{Changed the syntax of
% \cs{f@nch@for} to be resistent to catcode changes of \texttt{:!=}.\protect\\
% Removed the \texttt{[1]} from the defs of \cs{lhead} etc. because the parameter is
% consumed by the \cs{@[xy]lhead} etc. macros.}
%
% \changes{fancyhdr v1.99c}{1997/06/24}{Corrected \cs{nouppercase} to
% also include the protected form of \cs{MakeUppercase}.\\
% \cs{global} added to manipulation of \cs{headwidth}.\\
% \cs{iffootnote} command added.\\
% Some comments added about \cs{f@nch@head} and \cs{f@nch@foot}.}
%
% \changes{fancyhdr v1.99d}{1998/08/24}{Changed the default
% \cs{ps@empty} to \cs{ps@@empty} in order to allow
% \texttt{\cs{fancypagestyle}\{empty\}} redefinition.}
%
% \changes{fancyhdr v2.0}{2000/10/11}{Added LPPL license clause.\\
% A check for \cs{headheight} is added. An errormessage is given (once) if the
% header is too large. Empty headers don't generate the error even if
% \cs{headheight} is very small or even 0pt. \\
% Warning added for the use of '\texttt{E}' option when \texttt{twoside} option is not used.
% In this case the '\texttt{E}' fields will never be used.}
%
% \changes{fancyhdr v2.1beta}{2002/03/10}{New command:
% \texttt{\cs{fancyhfoffset}[place]\{length\}} defines offsets to be applied to
% the header/footer to let it stick into the margins (if length $!>$ 0).
% \texttt{place} is like in \cs{fancyhead}, except that only \texttt{E,O,L,R} can be used.
% This replaces the old calculation based on \cs{headwidth} and the marginpar
% area.
% \cs{headwidth} will be dynamically calculated in the headers/footers when
% this is used.}
%
% \changes{fancyhdr v2.1beta2}{2002/03/26}{\cs{fancyhfoffset} now also
% takes \texttt{H,F} as possible letters in the argument to
% allow the header and footer widths to be different.\\
% New commands \cs{fancyheadoffset} and \cs{fancyfootoffset} added comparable to
% \cs{fancyhead} and \cs{fancyfoot}.\\
% Errormessages and warnings have been made more informative.}
%
% \changes{fancyhdr v2.1x=fancyhdr v2.1}{2002/12/09}{The defaults for
% \cs{footrulewidth}, \cs{plainheadrulewidth} and
% \cs{plainfootrulewidth} are changed from \cs{z@skip} to 0pt. In this
% way when someone inadvertantly uses \cs{setlength} to change any of these, the value
% of \cs{z@skip} will not be changed, rather an errormessage will be given.}
%
% \changes{fancyhdr v3.0}{2004/03/03}{Release of version 3.0.}
%
% \changes{fancyhdr v3.1}{2004/10/07}{Added '\texttt{\cs{endlinechar}!=13}' to
% \cs{f@nch@reset} to prevent problems with \cs{includegraphics} in
% header/footer when \env{verbatiminput} is active.}
%
% \changes{fancyhdr v3.2}{2005/03/22}{Reset \cs{everypar} (the real one)
% in \cs{f@nch@reset} because spanish.ldf does strange things with
% \cs{everypar} between \guillemotleft\ and \guillemotright.}
%
% \changes{fancyhdr v3.3}{2016/08/20}{Replace
% `\texttt{\cs{@ifundefined}\{chapter\}}' with `\cs{ifx}\cs{chapter}\cs{@undefined}'
% because the former subtly makes \cs{chapter} equal to \cs{relax}, which may be
% undesirable in some cases.}
%
% \changes{fancyhdr v3.4}{2016/08/21}{Replace \cs{rm} by
% \cs{normalfont}\cs{rmfamily} and \cs{sl} by \cs{normalfont}\cs{slshape}.}
%
% \changes{fancyhdr v3.5}{2016/08/21}{Don't define \cs{footruleskip} if it is already defined.}
%
% \changes{fancyhdr v3.6}{2016/08/27}{Added a \cs{ProvidesPackage} line.\\
% Updated contact information.}
%
% \changes{fancyhdr v3.7}{2016/08/28}{Removed \cs{normalfont} from default values, as every field
% is already initialised with \cs{normalfont}.\\
% Set \cs{hsize} to \cs{headwidth} in header/footer.}
%
% \changes{fancyhdr v3.8}{2016/09/06}{Reset \bsbs, \cs{raggedleft},
% \cs{raggedright} and \cs{centering} to their default values to avoid a
% clash with the tabu package.\\
% Move the redefinition of \cs{@makecol} to \texttt{\cs{begin}\{document\}} to
% avoid a clash with the \Package{footmisc} package (and maybe others).\\
% Define a working \cs{iffootnote} command.}
%
% \changes{fancyhdr v3.9}{2016/10/11}{Put everything in a \texttt{.dtx} file.}
% \changes{fancyhdr v3.9}{2016/10/12}{Rename some macros to have 'f@nch@'
% in their names, to get a more uniform naming scheme for internal macros.}
%
% \begin{macro}{\if@nch@mpty}
% This macro tests if its argument is empty.
%    \begin{macrocode}
\newcommand\if@nch@mpty[1]{\def\temp@a{#1}\ifx\temp@a\@empty}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\iff@nch@check}
% Boolean for the \texttt{nocheck} option.
% \changes{fancyhdr v4.0}{2019/03/15}{Implement the \texttt{nocheck} option}
% \OPTindex{nocheck}
%    \begin{macrocode}
\newif\iff@nch@check
\f@nch@checktrue
\DeclareOption{nocheck}{%
  \f@nch@checkfalse
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\iff@nch@compatViii}
% Define \cs{iff@nch@compatViii} to track the \texttt{compatV3} option.
%    \begin{macrocode}
\newif\iff@nch@compatViii
%    \end{macrocode}
% \begin{macro}{\f@nch@gbl}
% Initialise \cs{f@nch@gbl} to do nothing (except with the \texttt{compatV3}
% option).
% \changes{fancyhdr v4.0}{2019/03/19}{Remove the \cs{global} in definitions}
% \changes{fancyhdr v4.0}{2019/03/16}{Implement the \texttt{compatV3} option}
%    \begin{macrocode}
\let\f@nch@gbl\relax
\DeclareOption{compatV3}{%
  \let\f@nch@gbl\global
  \f@nch@compatViiitrue
}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\iff@nch@twoside}
% Boolean for the \texttt{twoside} option.
% \changes{fancyhdr v4.1}{2022/09/06}{Implement \texttt{twoside} option.}
% \OPTindex{twoside}
% This is only set if the document itself is not two-sided.
%    \begin{macrocode}
\newif\iff@nch@twoside
\f@nch@twosidefalse
\DeclareOption{twoside}{%
  \if@twoside\else\f@nch@twosidetrue\fi
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\f@nch@def}
% This macro defines another macro (usually a header or footer field).
% Depending on the value of \cs{f@nch@gbl} the definition will be
% global or local.
% Default it is always local. But with the \texttt{compatV3} option it
% is \cs{global} in the normal definitions, and local in \cs{fancypagestyle}.
% The \cs{global} case is now considered a bug (or at least undesirable).
%
% If the value (argument 2) is empty, a \cs{leavevmode} will be substituted.
% If it is not empty, a \cs{strut} will be added.
%
%    \begin{macrocode}
\newcommand\f@nch@def[2]{\if@nch@mpty{#2}\f@nch@gbl\def#1{\leavevmode}\else
                                   \f@nch@gbl\def#1{#2\strut}\fi}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\f@nch@ifundefined}
% This macro tests if a command is undefined. Older versions of
% fancyhdr used \cs{@ifundefined}, but this had an undesired side effect
% in the original \LaTeX{} (the command was made equal to \cs{relax} if
% it was undefined). Another way was\\
% \verb+\ifx\thecommand\undefined ...+ or \verb+\ifx\thecommand\@undefined ...+
% but that could conflict with packages that use the \cs{@ifundefined}
% method. \LaTeX{} versions later than 2018 have a definition of
% \cs{@ifundefined} that avoids these problems, but not everybody may
% have such a version installed. Therefore we define our own version
% \cs{f@nch@ifundefined}.
% This definition is copied from the \Package{tocloft} package by Peter
% Wilson and Will Robertson.
%    \begin{macrocode}
\newcommand{\f@nch@ifundefined}[1]{%
  \begingroup\expandafter\expandafter\expandafter\endgroup
  \expandafter\ifx\csname #1\endcsname\relax
    \expandafter\@firstoftwo
  \else
    \expandafter\@secondoftwo
    \fi}
%    \end{macrocode}
% \end{macro}
%
% \changes{fancyhdr v4.0}{2019/03/17}{Added \texttt{headings} and
% \texttt{myheadings} options.}
% Standard styles are redefined optionally. These definitions are
% borrowed from the \Package{nccfancyhdr} package by by Alexander I. Rozhenko.
%
% \begin{macro}{\ps@myheadings}
% The redefinition of the \texttt{myheadings} style is conditional.
% We test the existence of the \cs{chapter} command and redefine the
% style accordingly.
%
% \OPTindex{myheadings}\PSindex{myheadings}
%    \begin{macrocode}
\DeclareOption{myheadings}{%
  \f@nch@ifundefined{chapter}{%
%    \end{macrocode}
% An article-like class without chapters:
%    \begin{macrocode}
    \def\ps@myheadings{\ps@f@nch@fancyproto \let\@mkboth\@gobbletwo
      \fancyhf{}
      \fancyhead[LE,RO]{\thepage}%
      \fancyhead[RE]{\slshape\leftmark}%
      \fancyhead[LO]{\slshape\rightmark}%
      \let\sectionmark\@gobble
      \let\subsectionmark\@gobble
    }%
  }%
%    \end{macrocode}
% A book/report-like class with chapters:
%    \begin{macrocode}
  {\def\ps@myheadings{\ps@f@nch@fancyproto \let\@mkboth\@gobbletwo
      \fancyhf{}
      \fancyhead[LE,RO]{\thepage}%
      \fancyhead[RE]{\slshape\leftmark}%
      \fancyhead[LO]{\slshape\rightmark}%
      \let\chaptermark\@gobble
      \let\sectionmark\@gobble
    }%
  }%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ps@headings}
% The redefinition of the \texttt{headings} style also differs for
% book-like and article-like classes. It also differs for
% one-side and two-side modes.
% \changes{fancyhdr v4.0.3}{2022/05/18}{Changed definition of
% \cs{@mkboth} from \cs{let}\cs{@mkboth}\cs{markboth} to
% \cs{def}\Cmd{@mkboth\{\cs{protect}\cs{markboth}\}} so that it will pick up changes
% to \cs{markboth}}
%    \begin{macrocode}
\DeclareOption{headings}{%
  \f@nch@ifundefined{chapter}{%
    \if@twoside
%    \end{macrocode}
% An article in two-side mode:
%    \begin{macrocode}
      \def\ps@headings{\ps@f@nch@fancyproto \def\@mkboth{\protect\markboth}
        \fancyhf{}
        \fancyhead[LE,RO]{\thepage}%
        \fancyhead[RE]{\slshape\leftmark}%
        \fancyhead[LO]{\slshape\rightmark}%
        \def\sectionmark##1{%
          \markboth{\MakeUppercase{%
            \ifnum \c@secnumdepth >\z@ \thesection\quad \fi##1}}{}}%
        \def\subsectionmark##1{%
          \markright{%
            \ifnum \c@secnumdepth >\@ne \thesubsection\quad \fi##1}}%
      }%
    \else
%    \end{macrocode}
% An article in one-side mode:
%    \begin{macrocode}
      \def\ps@headings{\ps@f@nch@fancyproto \def\@mkboth{\protect\markboth}
        \fancyhf{}
        \fancyhead[LE,RO]{\thepage}%
        \fancyhead[RE]{\slshape\leftmark}%
        \fancyhead[LO]{\slshape\rightmark}%
        \def\sectionmark##1{%
          \markright {\MakeUppercase{%
            \ifnum \c@secnumdepth >\z@ \thesection\quad \fi##1}}}%
        \let\subsectionmark\@gobble % Not needed but inserted for safety
      }%
    \fi
  }{\if@twoside
%    \end{macrocode}
% A book in two-side mode:
%    \begin{macrocode}
      \def\ps@headings{\ps@f@nch@fancyproto \def\@mkboth{\protect\markboth}
        \fancyhf{}
        \fancyhead[LE,RO]{\thepage}%
        \fancyhead[RE]{\slshape\leftmark}%
        \fancyhead[LO]{\slshape\rightmark}%
        \def\chaptermark##1{%
          \markboth{\MakeUppercase{%
            \ifnum \c@secnumdepth >\m@ne \if@mainmatter
              \@chapapp\ \thechapter. \ \fi\fi##1}}{}}%
        \def\sectionmark##1{%
          \markright {\MakeUppercase{%
            \ifnum \c@secnumdepth >\z@ \thesection. \ \fi##1}}}%
      }%
    \else
%    \end{macrocode}
% A book in one-side mode:
%    \begin{macrocode}
      \def\ps@headings{\ps@f@nch@fancyproto \def\@mkboth{\protect\markboth}
        \fancyhf{}
        \fancyhead[LE,RO]{\thepage}%
        \fancyhead[RE]{\slshape\leftmark}%
        \fancyhead[LO]{\slshape\rightmark}%
        \def\chaptermark##1{%
          \markright{\MakeUppercase{%
            \ifnum \c@secnumdepth >\m@ne \if@mainmatter
              \@chapapp\ \thechapter. \ \fi\fi##1}}}%
        \let\sectionmark\@gobble % Not needed but inserted for safety
      }%
    \fi
  }%
}
%    \end{macrocode}
% \end{macro}
%
% Process the options.
% \changes{fancyhdr v4.0}{2019/03/15}{Process package options.}
% \SpecialUsageIndex{\ProcessOptions}
%    \begin{macrocode}
\ProcessOptions*
%    \end{macrocode}
%
% \changes{fancyhdr v4.3}{2024/05/08}{Removed \cs{f@nch@errmsg} and
% \cs{f@nch@warning} and used \cs{PackageError} and \cs{PackageWarning} directly.}
% \begin{macro}{\f@nch@forc}
%   Usage: \cs{f@nch@forc} \cs{var} \texttt{\{charstring\}\{body\}}.\\
%   Execute the body for each character in \texttt{charstring} bound
%   to \cs{var}.
%   This is similar to \LaTeX's \cs{@tfor}, but it expands the \texttt{charstring}.
%    \begin{macrocode}
% \changes{fancyhdr v3.10}{2019/01/25}{Use \cs{newcommand} instead of \cs{def}.}
% \changes{fancyhdr v4.0.2}{2022/05/10}{Make \cs{f@nch@rc} \cs{long}.}
\newcommand{\f@nch@forc}[3]{\expandafter\f@nchf@rc\expandafter#1\expandafter{#2}{#3}}
\newcommand{\f@nchf@rc}[3]{\def\temp@ty{#2}\ifx\@empty\temp@ty\else
                                    \f@nch@rc#1#2\f@nch@rc{#3}\fi}
\long\def\f@nch@rc#1#2#3\f@nch@rc#4{\def#1{#2}#4\f@nchf@rc#1{#3}{#4}}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\f@nch@for}
%   Usage: \cs{f@nch@for}\cs{var}\texttt{\{list\}}\texttt{\{body\}} \\
%   Execute the body for each element of the list, bound to \cs{var}.
%   List elements are separated by commas. This is like \LaTeX's \cs{@for} but an empty
%   list is treated as a list with an empty element.
%
%    \begin{macrocode}
\newcommand{\f@nch@for}[3]{\edef\@fortmp{#2}%
  \expandafter\@forloop#2,\@nil,\@nil\@@#1{#3}}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\f@nch@default}
%   Usage: \cs{f@nch@default} \cs{var}\texttt{\{defaults\}\{argument\}} \\
%   Sets \cs{var} to the characters
%   from \texttt{defaults} appearing in \texttt{argument}, or to \texttt{defaults} if it would be
%   empty. All characters are lowercased first.
%
%    \begin{macrocode}
\newcommand\f@nch@default[3]{%
  \edef\temp@a{\lowercase{\edef\noexpand\temp@a{#3}}}\temp@a \def#1{}%
  \f@nch@forc\tmpf@ra{#2}%
  {\expandafter\f@nch@ifin\tmpf@ra\temp@a{\edef#1{#1\tmpf@ra}}{}}%
  \ifx\@empty#1\def#1{#2}\fi}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\f@nch@ifin}
%   Usage: \cs{f@nch@ifin} \meta{char} \meta{set} \meta{truecase} \meta{falsecase} \\
% If \meta{char} is in \meta{set}, then \meta{truecase} else \meta{falsecase}.
%    \begin{macrocode}
\newcommand{\f@nch@ifin}[4]{%
  \edef\temp@a{#2}\def\temp@b##1#1##2\temp@b{\def\temp@b{##1}}%
  \expandafter\temp@b#2#1\temp@b\ifx\temp@a\temp@b #4\else #3\fi}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\fancyhead}
% \changes{fancyhdr v3.9}{2016/10/12}{Let \cs{newcommand} do the
% handling of the optional parameter.}
% \begin{macro}{\fancyfoot}
% \changes{fancyhdr v3.9}{2016/10/12}{Let \cs{newcommand} do the
% handling of the optional parameter.}
% \begin{macro}{\fancyhf}
% \changes{fancyhdr v3.9}{2016/10/12}{Let \cs{newcommand} do the
% handling of the optional parameter.}
% These are the principal user macros. Pick up the parameters,
% and supply an 'h' (\cs{fancyhead}) or 'f' (\cs{fancyfoot}).
%    \begin{macrocode}
\newcommand{\fancyhead}[2][]{\f@nch@fancyhf\fancyhead h[#1]{#2}}%
\newcommand{\fancyfoot}[2][]{\f@nch@fancyhf\fancyfoot f[#1]{#2}}%
\newcommand{\fancyhf}[2][]{\f@nch@fancyhf\fancyhf {}[#1]{#2}}%
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\fancyheadoffset}
% \changes{fancyhdr v3.9}{2016/10/12}{Let \cs{newcommand} do the
% handling of the optional parameter.}
% \begin{macro}{\fancyfootoffset}
% \changes{fancyhdr v3.9}{2016/10/12}{Let \cs{newcommand} do the
% handling of the optional parameter.}
% \begin{macro}{\fancyhfoffset}
% \changes{fancyhdr v3.9}{2016/10/12}{Let \cs{newcommand} do the
% handling of the optional parameter.}
%   The commands for offsets.
% Pick up the parameters,
% and supply an 'h' (\cs{fancyheadoffset}) or 'f' (\cs{fancyfootoffset}).
%    \begin{macrocode}
\newcommand{\fancyheadoffset}[2][]{\f@nch@fancyhfoffs\fancyheadoffset h[#1]{#2}}%
\newcommand{\fancyfootoffset}[2][]{\f@nch@fancyhfoffs\fancyfootoffset f[#1]{#2}}%
\newcommand{\fancyhfoffset}[2][]{\f@nch@fancyhfoffs\fancyhfoffset {}[#1]{#2}}%
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\f@nch@fancyhf@Echeck}
% \changes{fancyhdr v4.1}{2022/09/06}{Implement \texttt{twoside} option.}
% Macro for warning if `E' is used without `twoside' option.
%    \begin{macrocode}
\def\f@nch@fancyhf@Echeck#1{%
  \if@twoside\else
    \iff@nch@twoside\else
      \if\f@nch@@eo e%
        \PackageWarning{fancyhdr} {\string#1's `E' option without twoside option is useless.\MessageBreak
          Please consider using the `twoside' option}%
  \fi\fi\fi
}
% \begin{macro}{\f@nch@fancyhf}
% \changes{fancyhdr v4.0.2}{2022/05/10}{Make \cs{f@nch@fancyhf} \cs{long}.}
% \changes{fancyhdr v4.1}{2022/09/06}{Implement \texttt{twoside} option.}
% This macro interprets the parameters for the headers and footers.\\
% Parameters:\\
% (1) The user command that was used (like \cs{fancyhead}). This is used
% for errors/warnings.\\
% (2) \texttt{h} (for \cs{fancyhead}), \texttt{f} (for \cs{fancyfoot}),
% or \texttt{\{\}} (for \cs{fancyhf}).\\
% (3) The optional parameter that was given to these commands (default \texttt{[]}).\\
% (4) The required parameter that was given to these commands.\\
%   The header and footer fields are stored in command sequences with
%   names of the form: \cs{f@nch@}\meta{x}\meta{y}\meta{z} with \meta{x} from
%   \texttt{[eo]}, \meta{y} from \texttt{[lcr]} and \meta{z} from \texttt{[hf]}.
%
%    \begin{macrocode}
\long\def\f@nch@fancyhf#1#2[#3]#4{%
  \def\temp@c{}%
  \f@nch@forc\tmpf@ra{#3}%
  {\expandafter\f@nch@ifin\tmpf@ra{eolcrhf,EOLCRHF}%
    {}{\edef\temp@c{\temp@c\tmpf@ra}}}%
  \ifx\@empty\temp@c\else \PackageError{fancyhdr}{Illegal char `\temp@c' in
    \string#1 argument: [#3]}{}%
  \fi \f@nch@for\temp@c{#3}%
  {\f@nch@default\f@nch@@eo{eo}\temp@c
    \f@nch@fancyhf@Echeck{#1}%
    \f@nch@default\f@nch@@lcr{lcr}\temp@c
    \f@nch@default\f@nch@@hf{hf}{#2\temp@c}%
    \f@nch@forc\f@nch@eo\f@nch@@eo
        {\f@nch@forc\f@nch@lcr\f@nch@@lcr
          {\f@nch@forc\f@nch@hf\f@nch@@hf
            {\expandafter\f@nch@def\csname
              f@nch@\f@nch@eo\f@nch@lcr\f@nch@hf\endcsname {#4}}}}}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\f@nch@fancyhfoffs}
% \changes{fancyhdr v4.1}{2022/09/06}{Implement \texttt{twoside} option.}
% This macro interprets the parameters for the header and footer
% offsets.\\
% Parameters:\\
% (1) The user command that was used (like \cs{fancyheadoffset}). This is used
% for errors/warnings.\\
% (2) \texttt{h} (for \cs{fancyheadoffset}), \texttt{f} (for \cs{fancyfootoffset}),
% or \texttt{\{\}} (for \cs{fancyhfoffset}).\\
% (3) The optional parameter that was given to these commands (default \texttt{[]}).\\
% (4) The required parameter that was given to these commands.\\
%   The header and footer offsets are stored in command sequences with
%   names of the form: \cs{f@nch@O@}\meta{x}\meta{y}\meta{z} with \meta{x} from
%   \texttt{[eo]}, \meta{y} from \texttt{[lr]} and \meta{z} from \texttt{[hf]}.
%
%    \begin{macrocode}
\def\f@nch@fancyhfoffs#1#2[#3]#4{%
  \def\temp@c{}%
  \f@nch@forc\tmpf@ra{#3}%
  {\expandafter\f@nch@ifin\tmpf@ra{eolrhf,EOLRHF}%
    {}{\edef\temp@c{\temp@c\tmpf@ra}}}%
  \ifx\@empty\temp@c\else \PackageError{fancyhdr}{Illegal char `\temp@c' in
    \string#1 argument: [#3]}{}%
  \fi \f@nch@for\temp@c{#3}%
  {\f@nch@default\f@nch@@eo{eo}\temp@c
    \f@nch@fancyhf@Echeck{#1}%
    \f@nch@default\f@nch@@lcr{lr}\temp@c
    \f@nch@default\f@nch@@hf{hf}{#2\temp@c}%
    \f@nch@forc\f@nch@eo\f@nch@@eo
        {\f@nch@forc\f@nch@lcr\f@nch@@lcr
          {\f@nch@forc\f@nch@hf\f@nch@@hf
            {\expandafter\setlength\csname
              f@nch@O@\f@nch@eo\f@nch@lcr\f@nch@hf\endcsname {#4}}}}}%
  \f@nch@setoffs}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\lhead}
% \changes{fancyhdr v3.9}{2016/10/12}{Let \cs{newcommand} do the
% handling of the optional parameter.}
% \begin{macro}{\chead}
% \changes{fancyhdr v3.9}{2016/10/12}{Let \cs{newcommand} do the
% handling of the optional parameter.}
% \begin{macro}{\rhead}
% \changes{fancyhdr v3.9}{2016/10/12}{Let \cs{newcommand} do the
% handling of the optional parameter.}
% \begin{macro}{\lfoot}
% \changes{fancyhdr v3.9}{2016/10/12}{Let \cs{newcommand} do the
% handling of the optional parameter.}
% \begin{macro}{\cfoot}
% \changes{fancyhdr v3.9}{2016/10/12}{Let \cs{newcommand} do the
% handling of the optional parameter.}
% \begin{macro}{\rfoot}
% \changes{fancyhdr v3.9}{2016/10/12}{Let \cs{newcommand} do the
% handling of the optional parameter.}
%   Fancyheadings version 1 commands. These are deprecated,
%   but they continue to work for compatibility reasons. They have an
%   optional parameter that is used as the value for even pages in a
%   two-sided document. If this is not given (or if the document is not
%   two-sided) the required parameter is used for both even and odd pages.
%   Therefore the default value for the optional parameter is the
%   required parameter. It is not possible to express this directly in
%   the definition. Therefore we use a trick. Both parameters are store
%   in a macro. For example for \cs{lhead} the parameter for even pages
%   is stored in \cs{f@nch@elh}, and the one for odd pages in
%   \cs{f@nch@olh}. For the others it is similar, just replace the
%   \texttt{l} with \texttt{c} or \texttt{r}, and the \texttt{h} with
%   \texttt{f}. In the body of the macro we first store the required
%   parameter in \cs{f@nch@olh}, and we use this macro as default for
%   the optional parameter. The optional parameter is then stored in
%   \cs{f@nch@elh}. The order of the assignments is therefore important.
%
%    \begin{macrocode}
\newcommand{\lhead}[2][\f@nch@olh]%
                     {\f@nch@def\f@nch@olh{#2}\f@nch@def\f@nch@elh{#1}}
\newcommand{\chead}[2][\f@nch@och]%
                     {\f@nch@def\f@nch@och{#2}\f@nch@def\f@nch@ech{#1}}
\newcommand{\rhead}[2][\f@nch@orh]%
                     {\f@nch@def\f@nch@orh{#2}\f@nch@def\f@nch@erh{#1}}
\newcommand{\lfoot}[2][\f@nch@olf]%
                     {\f@nch@def\f@nch@olf{#2}\f@nch@def\f@nch@elf{#1}}
\newcommand{\cfoot}[2][\f@nch@ocf]%
                     {\f@nch@def\f@nch@ocf{#2}\f@nch@def\f@nch@ecf{#1}}
\newcommand{\rfoot}[2][\f@nch@orf]%
                     {\f@nch@def\f@nch@orf{#2}\f@nch@def\f@nch@erf{#1}}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\f@nch@headwidth}
% Length parameter to be used for \cs{headwidth}. We use this rather
% than defining \cs{headwidth} as a length paramater directly to protect
% ourself to someone saying: \verb+\let\headwidth\textwidth+.
%    \begin{macrocode}
\newlength{\f@nch@headwidth} \let\headwidth\f@nch@headwidth
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\f@nch@O@elh}
% \begin{macro}{\f@nch@O@erh}
% \begin{macro}{\f@nch@O@olh}
% \begin{macro}{\f@nch@O@orh}
% \begin{macro}{\f@nch@O@elf}
% \begin{macro}{\f@nch@O@erf}
% \begin{macro}{\f@nch@O@olf}
% \begin{macro}{\f@nch@O@orf}
% Length parameters for the offsets.
%    \begin{macrocode}
\newlength{\f@nch@O@elh}
\newlength{\f@nch@O@erh}
\newlength{\f@nch@O@olh}
\newlength{\f@nch@O@orh}
\newlength{\f@nch@O@elf}
\newlength{\f@nch@O@erf}
\newlength{\f@nch@O@olf}
\newlength{\f@nch@O@orf}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\headrulewidth}
% \begin{macro}{\footrulewidth}
%    \begin{macrocode}
\newcommand{\headrulewidth}{0.4pt}
\newcommand{\footrulewidth}{0pt}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
%  \begin{macro}{\headruleskip}
%  Don't define \cs{headruleskip} if it is already defined.
% \changes{fancyhdr v4.0}{2019/03/22}{Parameter \cs{headruleskip}.}
%    \begin{macrocode}
\f@nch@ifundefined{headruleskip}%
      {\newcommand{\headruleskip}{0pt}}{}
%    \end{macrocode}
% \end{macro}
%
%  \begin{macro}{\footruleskip}
%  Memoir also defines \cs{footruleskip}.
%  Don't define \cs{footruleskip} if it is already defined.
%    \begin{macrocode}
\f@nch@ifundefined{footruleskip}%
      {\newcommand{\footruleskip}{.3\normalbaselineskip}}{}
%    \end{macrocode}
% \end{macro}
%
%  \begin{macro}{\plainheadrulewidth}
%  \begin{macro}{\plainfootrulewidth}
%   Fancyplain stuff shouldn't be used anymore (rather
%   \texttt{\cs{fancypagestyle}\{plain\}} should be used), but we keep it for
%   compatibility reasons.
%
%    \begin{macrocode}
\newcommand{\plainheadrulewidth}{0pt}
\newcommand{\plainfootrulewidth}{0pt}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\if@fancyplain}
% Boolean for the implementation of \cs{fancyplain}
%    \begin{macrocode}
\newif\if@fancyplain \@fancyplainfalse
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\fancyplain}
% Deprecated macro
%    \begin{macrocode}
\def\fancyplain#1#2{\if@fancyplain#1\else#2\fi}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\headwidth}
%   Initialise \cs{headwidth} with a magic constant.
%    \begin{macrocode}
\headwidth=-123456789sp
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\f@nch@raggedleft}
% \begin{macro}{\f@nch@raggedright}
% \begin{macro}{\f@nch@centering}
% \begin{macro}{\f@nch@everypar}
% \changes{fancyhdr v4.3}{2024/07/17}{Changed \cs{f@nch@everypar}. If the
%   LaTeX kernel has  expl3, use \cs{tex\_everypar:D}, and reset \cs{par},
%   \cs{@@par} and \cs{endgraf} to their original \TeX{} definitions, so that
%   no paragraph hooks will intrude in \Package{fancyhdr} code.}
% \changes{fancyhdr v4.3.1}{2024/07/23}{Also reset \cs{everypar} to its
%   original \TeX{} value \cs{tex\_everypar:D} in \cs{f@nch@resetpar},
%   otherwise environments based on \cs{trivlist}
%   will not work properly in \Package{fancyhdr} headers and footers.}
% Save the standard definitions of \cs{raggedleft}, \cs{raggedright},
% \cs{centering} and \cs{everypar} so that we can reset them when we are
% typesetting the headers and footers. Some packages change these to
% incompatible values.\\
% We also disable paragraph hooks, so that no paragraph hooks will
% intrude in \Package{fancyhdr} code. \textbf{NOTE: This is a hack, and
% should be replaced by cleaner code as soon as the \LaTeX{} kernel
% provides the necessary commands.}
% \changes{fancyhdr v4.5}{2024/11/29}{We use a less fragile way to
% disable paragraph hooks, thereby partially reverting the solution in
% version v4.3 and v4.3.1. This is less intruding in the hook system,
% and especially it doesn't affect kernel hooks, only user provided
% ones. We check the kernel version to see if it support paragraph hooks.}
%    \begin{macrocode}
\let\f@nch@raggedleft\raggedleft
\let\f@nch@raggedright\raggedright
\let\f@nch@centering\centering
\let\f@nch@everypar\everypar
\ifdefined\ExplSyntaxOn
  \ExplSyntaxOn
  \providecommand\IfFormatAtLeastTF{\@ifl@t@r\fmtversion}
  \IfFormatAtLeastTF{2021-06-01}{
%    \end{macrocode}
% \begin{macro}{\f@nch@clear@par@hook:n}
% Clear a (paragraph) hook locally.
% We don't need to restore as this will be done by the \TeX{} grouping.
%    \begin{macrocode}
    \cs_new:Npn \f@nch@clear@par@hook:n #1{
      \tl_clear:c {__hook~#1}
    }
    \newcommand\f@nch@resetpar{
      \f@nch@everypar{}
      \f@nch@clear@par@hook:n{para/before}
      \f@nch@clear@par@hook:n{para/begin}
      \f@nch@clear@par@hook:n{para/end}
      \f@nch@clear@par@hook:n{para/after}
    }
  }{
  \newcommand\f@nch@resetpar{
    \f@nch@everypar{}
  }
}
  \ExplSyntaxOff
\else
  \newcommand\f@nch@resetpar{%
    \f@nch@everypar{}%
  }
\fi
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\f@nch@noUppercase}
%   We want \cs{nouppercase} to work with the various evolutionary stages of
%   \cs{MakeUppercase}. The current version (2022/11/09) accepts an optional
%   argument with a language specification. Therefore we define a dummy macro
%   \cs{f@nch@noUppercase} which copies its mandatory agument, as a
%   replacement for \cs{MakeUppercase} while \cs{nouppercase} is active.
%    \begin{macrocode}
\newcommand\f@nch@noUppercase[2][]{#2}
%    \end{macrocode}
%
% \begin{macro}{\f@nch@reset}
%   Command to reset various things in the headers: a.o. single spacing
%   (taken from setspace.sty) and the catcode of ^^M and
%   \cs{endlinechar} (so that epsf files
%   in the header work if a verbatim crosses a page boundary).
%   Also reset the catcodes that are changed in verbatim environments,
%   \cs{makeatother} and \cs{ExplSyntaxOn}. It also
%   defines a \cs{nouppercase} command that disables \cs{uppercase} and
%   \cs{Makeuppercase}. It can only be used in the headers and footers. Set
%   \cs{hsize} to \cs{headwidth} (this helps for multicol); reset
%   \bsbs, \cs{raggedleft}, \cs{raggedright} and \cs{centering} to
%   their default values (for tabu), and \cs{everypar} to empty.\\
%   The font is reset to \cs{normalfont}. Actually this is done in the
%   \LaTeX{} output routine, so we don't have to do it here.
%   \changes{fancyhdr v4.1}{2022/11/09}{Change \cs{nouppercase} to work with
%     new definition of \cs{MakeUppercase}.}
%   \changes{fancyhdr v4.2}{2024/04/19}{Reset catcodes to their default
%   values in order to facilitate \cs{input} in headers/footers when \texttt{verbatim}
%   is active. (Issue \# 8 \url{https://github.com/pietvo/fancyhdr/issues/8}.)}
%   \changes{fancyhdr v4.3}{2024/05/08}{Remove pre-NFSS stuff}
%   \changes{fancyhdr v4.3}{2024/07/17}{Replace \cs{f@nch@everypar} by \cs{f@nch@resetpar}.}
%    \begin{macrocode}
\def\f@nch@reset{\f@nch@resetpar\restorecr\endlinechar=13
  \catcode`\\=0\catcode`\{=1\catcode`\}=2\catcode`\$=3\catcode`\&=4
  \catcode`\#=6\catcode`\^=7\catcode`\_=8\catcode`\ =10\catcode`\@=11
  \catcode`\:=11\catcode`\~=13\catcode`\%=14
  \catcode0=15 %NULL
  \catcode9=10 %TAB
  \let\\\@normalcr \let\raggedleft\f@nch@raggedleft
  \let\raggedright\f@nch@raggedright \let\centering\f@nch@centering
  \def\baselinestretch{1}%
  \hsize=\headwidth
  \def\nouppercase##1{{%
      \let\uppercase\relax\let\MakeUppercase\f@nch@noUppercase
      \expandafter\let\csname MakeUppercase \endcsname\relax
      \expandafter\def\csname MakeUppercase\space\space\space\endcsname
                                                   [####1]####2{####2}%
      ##1}}%
  \f@nch@ifundefined{@normalsize} {\normalsize} % for ucthesis.cls
   {\@normalsize}%
  }
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\fancycenter}
% \changes{fancyhdr v4.0}{2019/03/15}{Macro \cs{fancycenter} added}
% \cs{fancycenter}\oarg{dist}\oarg{stretch}\marg{left-mark}\marg{center-mark}\marg{right-mark}
%    \begin{macrocode}
\newcommand*{\fancycenter}[1][1em]{%
  \@ifnextchar[{\f@nch@center{#1}}{\f@nch@center{#1}[3]}%
}
\def\f@nch@center#1[#2]#3#4#5{%
%    \end{macrocode}
% At first, we execute the case when the \meta{center-mark} is empty\footnote{%
% This code is reused from the \Package{nccfancyhdr} by Alexander I. Rozhenko}:
%    \begin{macrocode}
  \def\@tempa{#4}\ifx\@tempa\@empty
    \hbox to\linewidth{\color@begingroup{#3}\hfil {#5}\color@endgroup}%
  \else
%    \end{macrocode}
% All we need to do is to calculate skips inserted before and after
% \meta{center-mark}. We will calculate them in the |\@tempskipa|
% and |\@tempskipb|. At first:
% \begin{quote}
% \verb|\@tempdima:=|\meta{dist};\\
% \verb|\@tempdimb:=|\meta{dist}\verb|*|\meta{stretch};\\
% \verb|\@tempdimc:=|\meta{dist}\verb|*|\meta{stretch}\verb|-|\meta{dist};\\
% \verb|\@tempskipa:=\@tempskipb:=\@tempdimb + 1fil - \@tempdimc|;
% \end{quote}
%    \begin{macrocode}
    \setlength\@tempdima{#1}%
    \setlength{\@tempdimb}{#2\@tempdima}%
    \@tempdimc \@tempdimb \advance\@tempdimc -\@tempdima
    \setlength\@tempskipa{\@tempdimb \@plus 1fil \@minus \@tempdimc}%
    \@tempskipb\@tempskipa
%    \end{macrocode}
% At this point, the \cs{@tempskipa} and \cs{@tempskipb} registers
% have the natural size \meta{dist}\verb|*|\meta{stretch},
% unlimited stretchability, and the minimum size \meta{dist}.
% Now we decrease the minimum size of \cs{@tempskipa} to zero if
% the \meta{left-mark} is empty:
%    \begin{macrocode}
    \def\@tempa{#3}\ifx\@tempa\@empty
      \addtolength\@tempskipa{\z@ \@minus \@tempdima}%
    \fi
%    \end{macrocode}
% Do the same things with the \cs{@tempskipb} register if the
% \meta{right-mark} is empty:
%    \begin{macrocode}
    \def\@tempa{#5}\ifx\@tempa\@empty % empty right
      \addtolength\@tempskipb{\z@ \@minus \@tempdima}%
    \fi
%    \end{macrocode}
% Finally, we correct the left and right glues taking into
% account the difference between lengths of \meta{left-mark}
% and \meta{right-mark}. We calculate which mark is shorter
% and increase the natural size of the corresponding register
% by the difference between their lengths.
%    \begin{macrocode}
    \settowidth{\@tempdimb}{#3}%
    \settowidth{\@tempdimc}{#5}%
    \ifdim\@tempdimb>\@tempdimc
      \advance\@tempdimb -\@tempdimc
      \addtolength\@tempskipb{\@tempdimb \@minus \@tempdimb}%
    \else
      \advance\@tempdimc -\@tempdimb
      \addtolength\@tempskipa{\@tempdimc \@minus \@tempdimc}%
    \fi
%    \end{macrocode}
% The \cs{@tempskipa} and \cs{@tempskipb} have been calculated.
% Put everything in the box.
%    \begin{macrocode}
    \hbox to\linewidth{\color@begingroup{#3}\hskip \@tempskipa
                      {#4}\hskip \@tempskipb {#5}\color@endgroup}%
  \fi
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\fancyheadinit}
% This macro can be used to define initialisation code that will be run
% before the construction of the header. It can for example set the
% color or the font, or change \cs{headrulewidth} or \cs{headruleskip}.
% It cannot make global changes, just changes for the header.
% \begin{macro}{\f@nch@headinit}
%   Storage for the header initialisation code.
%    \begin{macrocode}
\newcommand{\f@nch@headinit}{}
\newcommand{\fancyheadinit}[1]{%
  \def\f@nch@headinit{#1}%
}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\fancyfootinit}
% This macro can be used to define initialisation code that will be run
% before the construction of the footer. It can for example set the
% color or the font, or change \cs{footrulewidth} or \cs{footruleskip}.
% It cannot make global changes, just changes for the footer.
% \begin{macro}{\f@nch@footinit}
%   Storage for the footer initialisation code.
%    \begin{macrocode}
\newcommand{\f@nch@footinit}{}
\newcommand{\fancyfootinit}[1]{%
  \def\f@nch@footinit{#1}%
}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\fancyhfinit}
% This macro sets both the header and the footer initialisation codes to
% the same value.
%    \begin{macrocode}
\newcommand{\fancyhfinit}[1]{%
  \def\f@nch@headinit{#1}%
  \def\f@nch@footinit{#1}%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{hookdecl}{fancyhdr/before, fancyhdr/after, fancyhdr/head/begin,
%               fancyhdr/head/end, fancyhdr/foot/begin, fancyhdr/foot/end}
% \changes{fancyhdr v4.5}{2024/12/05}{Hooks added}
% Here we define the \Package{fancyhdr} hooks. It will be conditional on
% the presence of hook support in the \LaTeX{} kernel.
%    \begin{macrocode}
\ifdefined\NewMirroredHookPair
  \NewMirroredHookPair{fancyhdr/before}{fancyhdr/after}
  \NewMirroredHookPair{fancyhdr/head/begin}{fancyhdr/head/end}
  \NewMirroredHookPair{fancyhdr/foot/begin}{fancyhdr/foot/end}
\fi
%    \end{macrocode}
% \end{hookdecl}
%
% \begin{macro}{\f@nch@vbox}
% Make a \cs{vbox} with the header or footer. Check whether there is
% enough space and give a warning if not.
%   Use box 0 as a temp box and dimen 0 as temp dimen. This can be done,
%   because this code will always be used inside another box, and
%   therefore the changes are local.\\
%   Parameter 1 is \cs{headheight} or \cs{footskip}, respectively.\\
%   Parameter 2 is the contents of the box.
%
% \changes{fancyhdr v3.10}{2019/01/25}{Don't use \cs{global}\cs{setlength}.}
% \changes{fancyhdr v3.10}{2019/01/26}{Use \cs{newcommand} instead of \cs{def}.}
% \changes{fancyhdr v4.0}{2019/03/15}{Don't adjust the
% \cs{headheight}/\cs{footskip}, except when the \texttt{compatV3} option is given.}
% \changes{fancyhdr v4.0}{2019/03/15}{Don't check when the \texttt{nocheck} option is given.}
%    \begin{macrocode}
\newcommand\f@nch@vbox[2]{%
  \setbox0\vbox{#2}%
  \ifdim\ht0>#1\relax
%    \end{macrocode}
% This is the part where the the header/footer is too tall for the vertical space.
% If the \texttt{[nocheck]} package option is not given, we give a
% warning message.
%    \begin{macrocode}
    \iff@nch@check
      \dimen0=#1\advance\dimen0-\ht0
      \PackageWarning{fancyhdr}{%
        \string#1 is too small (\the#1): \MessageBreak
        Make it at least \the\ht0, for example:\MessageBreak
        \string\setlength{\string#1}{\the\ht0}%
%    \end{macrocode}
% If the \texttt{[compatV3} option was given (and not
% \texttt{[nocheck]}), we will also change the
% \cs{headheight}/\cs{footskip} globally below, and announce this in the warning message.
%    \begin{macrocode}
        \iff@nch@compatViii .\MessageBreak
        We now make it that large for the rest of the document.\MessageBreak
        This may cause the page layout to be inconsistent, however
        \fi
        \ifx#1\headheight .\MessageBreak
          You might also make \topmargin smaller to compensate:\MessageBreak
          \string\addtolength{\string\topmargin}{\the\dimen0}%
        \fi
        \@gobble
      }%
    \fi
    \iff@nch@compatViii
      \dimen0=#1\relax
      \global#1=\ht0\relax
      \ht0=\dimen0 %
    \else
      \ht0=#1%
    \fi
  \fi
  \box0}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\f@nch@head}
% \changes{fancyhdr v4.0}{2019/03/22}{Parameter \cs{headruleskip}.}
% \changes{fancyhdr v4.0}{2019/03/25}{\cs{fancyheadinit} initialisation
% code added and \cs{f@nch@reset} moved up.}
% \changes{fancyhdr v4.0.2}{2022/05/09}{Added
%   \cs{leavevmode}\cs{ignorespaces} to each  header/footer field.
%   The \cs{leavevmode} prevents a bug when a field starts with a
%   \cs{color} command. The \cs{ignorespaces} skips initial spaces in
%   the parameter, as is usual in a \cs{parbox}, for backwards compatibility.}
% \changes{fancyhdr v4.5}{2024/12/05}{Hooks added}
%   Put together a header or footer given the left, center and right
%   text, fillers at left and right and a rule. The \cs{xlap} commands put
%   the text into an hbox of zero size, so overlapping text does not
%   generate an errormessage.\\ These macros have 5 parameters:\\
%   1. LEFTSIDE BEARING.  This determines at which side the header will stick
%   out. When \cs{fancyhfoffset} is used this calculates \cs{headwidth},
%   otherwise it is \cs{hss} or \cs{relax} (after expansion). \\
%   2. \cs{f@nch@olh}, \cs{f@nch@elh}, \cs{f@nch@olf} or \cs{f@nch@elf}.
%   This is the left component. \\
%   3. \cs{f@nch@och}, \cs{f@nch@ech}, \cs{f@nch@ocf} or \cs{f@nch@ecf}.
%   This is the center component. \\
%   4. \cs{f@nch@orh}, \cs{f@nch@erh}, \cs{f@nch@orf} or \cs{f@nch@erf}.
%   This is the right component. \\
%   5. RIGHTSIDE BEARING. This is always \cs{relax} or \cs{hss}
%   (after expansion).\\
% Before constructing the header or footer, the environment is reset to
% a known state, the appropriate hooks (\texttt{fancyhdr/before} and
% \TTindex{fancyhdr/before}
% \TTindex{fancyhdr/head/begin}\TTindex{fancyhdr/foot/begin}
% \texttt{fancyhdr/head/begin} or \texttt{fancyhdr/foot/begin}) are
% executed, and then the corresponding initialisation code as given in
% \cs{fancyheadinit} or \cs{fancyfootinit}, respectively, is run.\\
% After constructing the header or footer, the hooks for the end
% (\texttt{fancyhdr/head/end} or \texttt{fancyhdr/foot/end} and
% \TTindex{fancyhdr/head/end}\TTindex{fancyhdr/foot/end}
% \TTindex{fancyhdr/after}
% \texttt{fancyhdr/after}) are run.
%    \begin{macrocode}
\newcommand\f@nch@head[5]{%
  \f@nch@reset
  \ifdefined\UseHook\UseHook{fancyhdr/before}\UseHook{fancyhdr/head/begin}\fi
  \f@nch@headinit\relax
  #1%
  \hbox to\headwidth{%
    \f@nch@vbox\headheight{%
      \hbox{%
        \rlap{\parbox[b]{\headwidth}{\raggedright\leavevmode\ignorespaces#2}}%
        \hfill
        \parbox[b]{\headwidth}{\centering\leavevmode\ignorespaces#3}%
        \hfill
        \llap{\parbox[b]{\headwidth}{\raggedleft\leavevmode\ignorespaces#4}}%
      }%
      \vskip\headruleskip\relax
      \headrule
    }%
  }%
  #5%
  \ifdefined\UseHook\UseHook{fancyhdr/head/end}\UseHook{fancyhdr/after}\fi
}
%    \end{macrocode}
%
% \begin{macro}{\f@nch@foot}
% \changes{fancyhdr v3.10}{2019/01/26}{Put \cs{footrule} in a \cs{vbox}
% to accommodate for flexible footrules.}
% \changes{fancyhdr v3.10}{2019/01/28}{Use \cs{unvbox} on the footrule \cs{vbox}
% to preserve vertical spacing.}
% \changes{fancyhdr v3.10}{2019/01/28}{Move \cs{footruleskip} outside of the \cs{footrule}
% definition.}
% \changes{fancyhdr v4.0}{2019/03/25}{\cs{fancyfootinit} initialisation
% code added and \cs{f@nch@reset} moved up.}
% \changes{fancyhdr v4.0.2}{2022/05/09}{Added
%   \cs{leavevmode}\cs{ignorespaces} to each  header/footer field.
%   The \cs{leavevmode} prevents a bug when a field starts with a
%   \cs{color} command. The \cs{ignorespaces} skips initial spaces in
%   the parameter, as is usual in a \cs{parbox}, for backwards compatibility.}
% \changes{fancyhdr v4.5}{2024/12/05}{Hooks added}
% We put the \cs{footrule} in a \cs{vbox} to accommodate for flexible
% footrules (e.g.\ using \cs{hrulefill}), so that the \cs{headwidth} will
% be used as the line width. But to preserve the vertical spacing we
% then \cs{unvbox} this box.
%
%    \begin{macrocode}
\newcommand\f@nch@foot[5]{%
  \f@nch@reset
  \ifdefined\UseHook\UseHook{fancyhdr/before}\UseHook{fancyhdr/foot/begin}\fi
  \f@nch@footinit\relax
  #1%
  \hbox to\headwidth{%
    \f@nch@vbox\footskip{%
      \setbox0=\vbox{\footrule}\unvbox0
      \vskip\footruleskip
      \hbox{%
        \rlap{\parbox[t]{\headwidth}{\raggedright\leavevmode\ignorespaces#2}}%
        \hfill
        \parbox[t]{\headwidth}{\centering\leavevmode\ignorespaces#3}%
        \hfill
        \llap{\parbox[t]{\headwidth}{\raggedleft\leavevmode\ignorespaces#4}}%
      }%
    }%
  }%
  #5%
  \ifdefined\UseHook\UseHook{fancyhdr/foot/end}\UseHook{fancyhdr/after}\fi
}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\MakeUppercase}
%   Define \MakeUppercase for old \LaTeX{}en. Note: we used \cs{def} rather
%   than \cs{let}, so that \verb+\let\uppercase\relax+ (from the version 1
%   documentation) will still work.
%
%    \begin{macrocode}
\f@nch@ifundefined{MakeUppercase}{\def\MakeUppercase{\uppercase}}{}%
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@chapapp}
% Define \cs{@chapapp} for classes that don't have it, e.g.\ amsbook
%    \begin{macrocode}
\f@nch@ifundefined{@chapapp}{\let\@chapapp\chaptername}{}%
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\f@nch@initialise}
% \changes{fancyhdr v4.0}{2019/03/21}{Put all the initialisation code in
% \cs{f@nch@initialise}}
% This macro initialises the headers and footers and \cs{chaptermark}
% and/or \Cmd{[sub]sectionmark} for pagestyle \texttt{fancy}
%    \begin{macrocode}
\def\f@nch@initialise{%
%    \end{macrocode}
%
% \begin{macro}{\chaptermark}
% \begin{macro}{\sectionmark}
% \begin{macro}{\subsectionmark}
% Standard definitions for \cs{chaptermark}, \cs{sectionmark} and \cs{subsectionmark}.
%
%    \begin{macrocode}
  \f@nch@ifundefined{chapter}%
   {\def\sectionmark##1{\markboth{\MakeUppercase{\ifnum \c@secnumdepth>\z@
          \thesection\hskip 1em\relax
        \fi ##1}}{}}%
    \def\subsectionmark##1{\markright {\ifnum \c@secnumdepth >\@ne
      \thesubsection\hskip 1em\relax \fi ##1}}}%
   {\def\chaptermark##1{\markboth {\MakeUppercase{\ifnum
        \c@secnumdepth>\m@ne \@chapapp\ \thechapter. \ \fi ##1}}{}}%
    \def\sectionmark##1{\markright{\MakeUppercase{\ifnum \c@secnumdepth >\z@
        \thesection. \ \fi ##1}}}%
   }%
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\headrule}
%    \begin{macrocode}
  \def\headrule{{\if@fancyplain\let\headrulewidth\plainheadrulewidth\fi
      \hrule\@height\headrulewidth\@width\headwidth
      \vskip-\headrulewidth}}%
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\footrule}
% \changes{fancyhdr v3.10}{2019/01/28}{Move \cs{footruleskip} outside of the \cs{footrule}
% definition and remove useless \cs{vskip} at the top.}
%    \begin{macrocode}
  \def\footrule{{\if@fancyplain\let\footrulewidth\plainfootrulewidth\fi
      \hrule\@width\headwidth\@height\footrulewidth}}%
%    \end{macrocode}
% \end{macro}
%
% Default values for \cs{headrulewidth}, \cs{footrulewidth},
% \cs{headruleskip} and \cs{footruleskip}.
%    \begin{macrocode}
  \def\headrulewidth{0.4pt}%
  \def\footrulewidth{0pt}%
  \def\headruleskip{0pt}%
  \def\footruleskip{0.3\normalbaselineskip}%
%    \end{macrocode}
% Initialisation of the head and foot text.
%
% The default values still contain \cs{fancyplain} for compatibility:
% lefthead empty on ``plain'' pages, \cs{rightmark} on even, \cs{leftmark} on odd pages;
% evenhead empty on ``plain'' pages, \cs{leftmark} on even, \cs{rightmark} on odd pages.
%    \begin{macrocode}
  \fancyhf{}%
  \if@twoside
    \fancyhead[el,or]{\fancyplain{}{\slshape\rightmark}}%
    \fancyhead[er,ol]{\fancyplain{}{\slshape\leftmark}}%
  \else
    \fancyhead[l]{\fancyplain{}{\slshape\rightmark}}%
    \fancyhead[r]{\fancyplain{}{\slshape\leftmark}}%
  \fi
  \fancyfoot[c]{\rmfamily\thepage}% page number
}
%    \end{macrocode}
% Call the initialisation
%    \begin{macrocode}
\f@nch@initialise
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ps@f@nch@fancyproto}
% \cs{ps@f@nch@fancyproto} is the
% initial value for pagestyle \texttt{fancy}. The real page style
% is \cs{ps@f@nch@fancycore} but \cs{ps@f@nch@fancyproto} for the first use
% of \Cmd{pagestyle\{fancy\}} or any of its derivatives. It
% initialises \cs{headwidth}, and then resets itself to
% \cs{ps@f@nch@fancycore}. For backwards compatibility it still
% contains \cs{@fancyplainfalse}.
% The reason we have \cs{ps@f@nch@fancyproto} is so that page style
% \texttt{fancy} can be redefined.
% \changes{fancyhdr v4.0}{2019/03/21}{Reorganise \cs{ps@fancy}}
%    \begin{macrocode}
\def\ps@f@nch@fancyproto{%
%    \end{macrocode}
% Initialise \cs{headwidth} if the user didn't. If \cs{headwidth} ${}< 0$,
% then the user did not initialise it, or they just added something to
% it in the expectation that
% it was initialised to \cs{textwidth}. We compensate this now. This loses if
% the user intended to multiply it by a factor. But that case is more
% likely done by saying something like \verb+\setlength{\headwidth}{1.2\textwidth}+.
% The documentation advises to change \cs{headwidth} after the first call to
% \verb+\pagestyle{fancy}+. This code is just to catch the most common cases were
% that is not the case.
%    \begin{macrocode}
  \ifdim\headwidth<0sp
    \global\advance\headwidth123456789sp\global\advance\headwidth\textwidth
  \fi
%    \end{macrocode}
% Now we reset \cs{ps@f@nch@fancyproto} to \cs{ps@f@nch@fancycore} with \cs{@fancyplainfalse}
% and call that version.
%    \begin{macrocode}
  \gdef\ps@f@nch@fancyproto{\@fancyplainfalse\ps@f@nch@fancycore}%
  \@fancyplainfalse\ps@f@nch@fancycore
}%
%    \end{macrocode}
% Let the system know this is a \texttt{fancyhdr} pagestyle.
%    \begin{macrocode}
\@namedef{f@nch@ps@f@nch@fancyproto-is-fancyhdr}{}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{ps@fancy}
% Define \cs{ps@fancy} just to call \cs{ps@f@nch@fancyproto}.
%    \begin{macrocode}
\def\ps@fancy{\ps@f@nch@fancyproto}
\@namedef{f@nch@ps@fancy-is-fancyhdr}{}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ps@fancyplain}
% The pagestyle \texttt{fancyplain} (deprecated).
% After initializing by calling \cs{ps@f@nch@fancyproto} it sets page style
% \texttt{plain} to our version \cs{ps@plain@fancy}, which just sets
% \cs{@fancyplaintrue} and then calls the page style fancy implementation.
%
%    \begin{macrocode}
\def\ps@fancyplain{\ps@f@nch@fancyproto \let\ps@plain\ps@plain@fancy}
\def\ps@plain@fancy{\@fancyplaintrue\ps@f@nch@fancycore}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\f@nch@ps@empty}
% Save the definition of \cs{ps@empty} (pagestyle \texttt{empty}).
% \changes{fancyhdr v4.0}{2019/03/21}{Rename \cs{ps@@empty} to \cs{f@nch@ps@empty}}
%
%    \begin{macrocode}
\let\f@nch@ps@empty\ps@empty
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ps@f@nch@fancycore}
% \changes{fancyhdr v4.0}{2019/03/21}{Rename \cs{ps@@fancy} to \cs{ps@f@nch@fancycore}}
% \changes{fancyhdr v4.1}{2022/09/06}{Implement \texttt{twoside} option.}
% The actual implementation of pagestyle \texttt{fancy}. For amsbook/amsart, which do
% strange things with \cs{topskip}, we start with \cs{f@nch@ps@empty}. We
% construct the even and odd headers and footers from all the parts that
% we have collected.
%    \begin{macrocode}
\def\ps@f@nch@fancycore{%
  \f@nch@ps@empty
  \def\@mkboth{\protect\markboth}%
  \def\f@nch@oddhead{\f@nch@head\f@nch@Oolh\f@nch@olh\f@nch@och\f@nch@orh\f@nch@Oorh}%
  \def\@oddhead{%
    \iff@nch@twoside
      \ifodd\c@page
        \f@nch@oddhead
      \else
        \@evenhead
      \fi
    \else
      \f@nch@oddhead
    \fi
  }
  \def\f@nch@oddfoot{\f@nch@foot\f@nch@Oolf\f@nch@olf\f@nch@ocf\f@nch@orf\f@nch@Oorf}%
  \def\@oddfoot{%
    \iff@nch@twoside
      \ifodd\c@page
        \f@nch@oddfoot
      \else
        \@evenfoot
      \fi
    \else
      \f@nch@oddfoot
    \fi
  }
  \def\@evenhead{\f@nch@head\f@nch@Oelh\f@nch@elh\f@nch@ech\f@nch@erh\f@nch@Oerh}%
  \def\@evenfoot{\f@nch@foot\f@nch@Oelf\f@nch@elf\f@nch@ecf\f@nch@erf\f@nch@Oerf}%
}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{ps@fancydefault}
% \changes{fancyhdr v4.0}{2019/03/21}{Added \cs{ps@fancydefault}}
% This is page style \texttt{fancydefault}. It is in fact page style
% \texttt{fancy} with all the defaults embedded. In contrast with page
% style \texttt{fancy} that gets all its settings from the environment.
% It reruns all initialisations and then calls \cs{ps@f@nch@fancyproto}.
%    \begin{macrocode}
\def\ps@fancydefault{%
  \f@nch@initialise
  \ps@f@nch@fancyproto
}
\@namedef{f@nch@ps@fancydefault-is-fancyhdr}{}
%    \end{macrocode}
%
% \end{macro}
%
% \begin{macro}{\f@nch@Oolh}
% \begin{macro}{\f@nch@Oorh}
% \begin{macro}{\f@nch@Oelh}
% \begin{macro}{\f@nch@Oerh}
% \begin{macro}{\f@nch@Oolf}
% \begin{macro}{\f@nch@Oorf}
% \begin{macro}{\f@nch@Oelf}
% \begin{macro}{\f@nch@Oerf}
%   Default definitions for compatibility mode: These cause the
%   header/footer to take the defined \cs{headwidth} as its width and if
%   required to shift it in the direction of the marginpar area.
%
%    \begin{macrocode}
\def\f@nch@Oolh{\if@reversemargin\hss\else\relax\fi}
\def\f@nch@Oorh{\if@reversemargin\relax\else\hss\fi}
\let\f@nch@Oelh\f@nch@Oorh
\let\f@nch@Oerh\f@nch@Oolh
\let\f@nch@Oolf\f@nch@Oolh
\let\f@nch@Oorf\f@nch@Oorh
\let\f@nch@Oelf\f@nch@Oelh
\let\f@nch@Oerf\f@nch@Oerh
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\f@nch@offsolh}
% \begin{macro}{\f@nch@offselh}
%   New definitions for the use of \cs{fancyhfoffset},
%   \cs{fancyheadoffset}, \cs{fancyfootoffset}.  These calculate the
%   \cs{headwidth} from \cs{textwidth} and the specified offsets.\\
%   First for the header.
%
%    \begin{macrocode}
\def\f@nch@offsolh{\headwidth=\textwidth\advance\headwidth\f@nch@O@olh
                   \advance\headwidth\f@nch@O@orh\hskip-\f@nch@O@olh}
\def\f@nch@offselh{\headwidth=\textwidth\advance\headwidth\f@nch@O@elh
                   \advance\headwidth\f@nch@O@erh\hskip-\f@nch@O@elh}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\f@nch@offsolh}
% \begin{macro}{\f@nch@offselh}
% The same for the footer.
%
%    \begin{macrocode}
\def\f@nch@offsolf{\headwidth=\textwidth\advance\headwidth\f@nch@O@olf
                   \advance\headwidth\f@nch@O@orf\hskip-\f@nch@O@olf}
\def\f@nch@offself{\headwidth=\textwidth\advance\headwidth\f@nch@O@elf
                   \advance\headwidth\f@nch@O@erf\hskip-\f@nch@O@elf}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\f@nch@setoffs}
% Set the offset parts to be used in the construction of the headers and
% footers. Depending on \cs{f@nch@gbl} it will be done globally (for
% pagestyle \texttt{fancy}) or locally (for \cs{fancypagestyle}).
% Just in case \verb+\let\headwidth\textwidth+ was used, we reset
% \cs{headwidth} to the length parameter that it should be.
%    \begin{macrocode}
\def\f@nch@setoffs{%
  \f@nch@gbl\let\headwidth\f@nch@headwidth
  \f@nch@gbl\let\f@nch@Oolh\f@nch@offsolh
  \f@nch@gbl\let\f@nch@Oelh\f@nch@offselh \f@nch@gbl\let\f@nch@Oorh\hss
  \f@nch@gbl\let\f@nch@Oerh\hss \f@nch@gbl\let\f@nch@Oolf\f@nch@offsolf
  \f@nch@gbl\let\f@nch@Oelf\f@nch@offself \f@nch@gbl\let\f@nch@Oorf\hss
  \f@nch@gbl\let\f@nch@Oerf\hss
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\iff@nch@footnote}
% \begin{macro}{\@makecol}
%   Redefine \cs{@makecol} so that we can capture if there are
%   top/bottom floats, footnotes or if we are on a float page. Because
%   of a clash with the footmisc package we do this at
%   \verb+\begin{document}+.\\
%   We need a boolean \cs{iff@nch@footnote} to capture if there was a footnote.
%
%    \begin{macrocode}
\newif\iff@nch@footnote
\AtBeginDocument{%
  \let\latex@makecol\@makecol
  \def\@makecol{\ifvoid\footins\f@nch@footnotefalse\else\f@nch@footnotetrue\fi
    \let\topfloat\@toplist\let\botfloat\@botlist\latex@makecol}%
}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\iftopfloat}
% \begin{macro}{\ifbotfloat}
% \begin{macro}{\iffloatpage}
% \begin{macro}{\iffootnote}
% These can be used in a header/footer field to make them conditional on
% the presence of floats and/or footnotes.
% \changes{fancyhdr v4.3}{2024/05/08}{Replace \cs{empty} with \cs{@empty}}
%    \begin{macrocode}
\newcommand\iftopfloat[2]{\ifx\topfloat\@empty #2\else #1\fi}%
\newcommand\ifbotfloat[2]{\ifx\botfloat\@empty #2\else #1\fi}%
\newcommand\iffloatpage[2]{\if@fcolmade #1\else #2\fi}%
\newcommand\iffootnote[2]{\iff@nch@footnote #1\else #2\fi}%
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\fancypagestyle}
% Define a new page style. The optional second argument is the base page style.
% It defaults to \cs{ps@f@nch@fancyproto}.
% \changes{fancyhdr v4.0}{2019/03/21}{Added optional base style argument.}
%    \begin{macrocode}
\newcommand{\fancypagestyle}[1]{%
  \@ifnextchar[{\f@nch@pagestyle{#1}}{\f@nch@pagestyle{#1}[f@nch@fancyproto]}%
}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\f@nch@pagestyle}
% The actual code for \cs{fancypagestyle}. Build the page style body.
% Declare it as a fancyhdr-based page style.
% \changes{fancyhdr v4.0}{2019/09/05}{Make the definition of \cs{f@nch@pagestyle} \cs{long}.}
%    \begin{macrocode}
\long\def\f@nch@pagestyle#1[#2]#3{%
  \f@nch@ifundefined{ps@#2}{%
    \PackageError{fancyhdr}{\string\fancypagestyle: Unknown base page style `#2'}{}%
  }{%
    \f@nch@ifundefined{f@nch@ps@#2-is-fancyhdr}{%
      \PackageError{fancyhdr}{\string\fancypagestyle: Base page style `#2' is not fancyhdr-based}{}%
    }%
    {%
      \@namedef{ps@#1}{\let\f@nch@gbl\relax\@nameuse{ps@#2}#3\relax}%
      \@namedef{f@nch@ps@#1-is-fancyhdr}{}%
    }%
  }%
}%
%    \end{macrocode}
% \end{macro}
% \changes{fancyhdr v4.1}{202/09/16}{Support for class \Package{newlfm}.}
% The (really outdated) document class \Package{newlfm} uses some internal
% \Package{fancyhdr} commands that have gotten new names. So here we check if
% that class is loaded and then we redefine the affected \Package{newlfm} macros.
% We have to do some of the redefinitions in \cs{AtBeginDocument}, as
% \Package{fancyhdr} is loaded before the affected macros are defined. Also
% the macro \cs{@zfancyhead} is only called once, with wrong (outdated)
% parameters, so instead of changing the call of the macro, we substitute the
% right parameters inline.
%    \begin{macrocode}
\@ifclassloaded{newlfm}
{
  \let\ps@@empty\f@nch@ps@empty
  \AtBeginDocument{%
    \renewcommand{\@zfancyhead}[5]{\relax\hbox to\headwidth{\f@nch@reset
      \@zfancyvbox\headheight{\hbox
        {\rlap{\parbox[b]{\headwidth}{\raggedright\f@nch@olh}}\hfill
          \parbox[b]{\headwidth}{\centering\f@nch@olh}\hfill
          \llap{\parbox[b]{\headwidth}{\raggedleft\f@nch@orh}}}%
        \zheadrule}}\relax}%
  }
}
{}
%    \end{macrocode}
%</fancyhdr>
%
% \section{extramarks.sty}
%
%<*extramarks>
% \changes{extramarks v1.99e}{2000/10/11}{Added a few \% marks to get rid
% of unwanted spaces, and \cs{endinput}. \\
% Added LPPL license clause.}
% \changes{extramarks v2.0beta}{2002/03/12}{Adapted for the new
% implementation of marks in \LaTeX{} to solve bug latex/3203. \\
% Added symmetric commands \cs{firstrightmark}, \cs{lastleftmark}, \cs{firstleftxmark},
% \cs{firstrightxmark}, \cs{lastrightxmark}, \cs{lastleftxmark}, \cs{topleftxmark} and
% \cs{toprightxmark}.}
% \changes{extramarks v2.0x=fancyhdr v 2.0}{2004/03/03}{version 2.0 Release.}
% \changes{extramarks v2.1}{2016/08/27}{Added a \cs{ProvidesPackage} line.\\
% Updated contact information.}
% \changes{extramarks v3.9}{2016/10/12}{Unify version number with \Package{fancyhdr.sty}.}
%
% \changes{extramarks v3.9a}{2017/06/30}{Restore \cs{newtoks}\cs{@temptokenb}}
% \begin{macro}{\@temptokenb}
% A token register to store some marks information
%    \begin{macrocode}
\newtoks\@temptokenb
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\unrestored@protected@xdef}
% Define this macro just in case it isn't defined (should be part of \LaTeX).
%    \begin{macrocode}
\providecommand\unrestored@protected@xdef{%
  \let\protect\@unexpandable@protect \xdef}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\markboth}
% Our own definition of \cs{markboth}, mainly because \cs{@markboth}
% gets more parameters.
% \changes{extramarks v4.4}{2024/11/20}{Add setting the new style marks
% for \cs{leftmark} (\texttt{2e-left}) and \cs{rightmark}
% (\texttt{2e-right} and \texttt{2e-right-nonempty}). We do this only if
% the new marks are defined in the \LaTeX{} kernel.}
% First the definition for modern \LaTeX{} distributions.
%    \begin{macrocode}
\ifdefined\ExplSyntaxOn
\ExplSyntaxOn
\DeclareRobustCommand*\markboth[2]{%
  \begingroup
    \let\label\relax \let\index\relax \let\glossary\relax
    \expandafter\@markboth\@themark{#1}{#2}%
    \@temptokena \expandafter{\@themark}%
    \ifdefined\mark_insert:nn
    % 3 new lines to set the new marks
      \mark_insert:nn{2e-left}{#1}
      \mark_insert:nn{2e-right}{#2}
      \tl_if_empty:nF{#2}{ \mark_insert:nn{2e-right-nonempty}{#2} }
    \fi
    \mark{\the\@temptokena}%
  \endgroup
  \if@nobreak\ifvmode\nobreak\fi\fi}
\ExplSyntaxOff
%    \end{macrocode}
% If we are with a pre-\LaTeX3 kernel, we use the definition from an
% older version of \Package{extramarks}.
%    \begin{macrocode}
\else
\def\markboth#1#2{%
  \begingroup
  \let\label\relax \let\index\relax \let\glossary\relax
  \expandafter\@markboth\@themark{#1}{#2}%
  \@temptokena \expandafter{\@themark}%
  \mark{\the\@temptokena}%
  \endgroup
  \if@nobreak\ifvmode\nobreak\fi\fi}
\fi
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\@mkboth}
% Initialization of \cs{@mkboth}, so that it will pick up changes to
% \cs{markboth}
% \changes{extramarks v4.0.3}{2022/05/18}{Initialize definition of
% \cs{@mkboth} to \cs{def}\Cmd{@mkboth\{\cs{protect}\cs{markboth}\}}
% if it wasn't equal to \cs{@gobbletwo} so that it will pick up
% changes to \cs{markboth}}
%    \begin{macrocode}
\ifx\@mkboth\@gobbletwo\else\def\@mkboth{\protect\markboth}\fi
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\markright}
%   We use the standard definition of \cs{markright}. No use to duplicate here.
% \end{macro}
%
% \begin{macro}{\@markboth}
%   Note: put \texttt{\#3\#4} in toks register.
%    \begin{macrocode}
\def\@markboth#1#2#3#4#5#6{\@temptokena{{#3}{#4}}%
  \unrestored@protected@xdef\@themark{{#5}{#6}\the\@temptokena}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@markright}
%   Note: put \texttt{\#1} and \texttt{\#3\#4} in toks registers.
%   Maybe I can get rid of the extra \cs{@temptokenb} by doing the expansion
%   of \texttt{\#5} to a temp separately. But then, nowadays registers
%   are plenty.
%    \begin{macrocode}
\def\@markright#1#2#3#4#5{\@temptokena{#1}\@temptokenb{{#3}{#4}}%
  \unrestored@protected@xdef\@themark{{\the\@temptokena}{#5}\the\@temptokenb}}
%    \end{macrocode}
% \end{macro}

% \begin{macro}{\@leftmark}
% \begin{macro}{\@rightmark}
% Internal macros to get the standard marks.
%    \begin{macrocode}
\def\@leftmark#1#2#3#4{#1}
\def\@rightmark#1#2#3#4{#2}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \changes{extramarks v4.5}{2024/11/28}{Don't redefine \cs{leftmark}
% and \cs{rightmark} in \LaTeX{} kernel 2025-06-01 and later.}
%
% \begin{macro}{\leftmark}
% \begin{macro}{\rightmark}
% \begin{macro}{\firstleftmark}
% \begin{macro}{\lastrightmark}
% \begin{macro}{\firstrightmark}
% \begin{macro}{\lastleftmark}
% The standard marks + the new ones (based on the standard marks info).
% We provide \cs{IfFormatAtLeastTF} in case we have a rather old \LaTeX{}
% format (in which case the test will always be false).
% If the \LaTeX{} format is 2025-06-01 or later, \cs{leftmark} and
% \cs{rightmark} have definitions based upon the new marks, so we should
% not redefine these in \Package{extramarks}.
%    \begin{macrocode}
\providecommand\IfFormatAtLeastTF{\@ifl@t@r\fmtversion}
\IfFormatAtLeastTF{2025-06-01}{}{%
  \def\leftmark{\expandafter\@leftmark
      \botmark\@empty\@empty\@empty\@empty}
    \def\rightmark{\expandafter\@rightmark
      \firstmark\@empty\@empty\@empty\@empty}
}
\def\firstleftmark{\expandafter\@leftmark
      \firstmark\@empty\@empty\@empty\@empty}
\def\lastrightmark{\expandafter\@rightmark
      \botmark\@empty\@empty\@empty\@empty}
\let\firstrightmark \rightmark
\let\lastleftmark \leftmark
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}

% \begin{macro}{\@themark}
% This is where the marks information is stored.
%    \begin{macrocode}
\def\@themark{{}{}{}{}}
%    \end{macrocode}
% \end{macro}

% \begin{macro}{\extramarks}
% This command is used to define the extra marks.
%    \begin{macrocode}
\newcommand\extramarks[2]{%
  \begingroup
  \let\label\relax \let\index\relax \let\glossary\relax
  \expandafter\@markextra\@themark{#1}{#2}%
  \@temptokena \expandafter{\@themark}%
  \mark{\the\@temptokena}%
  \endgroup
  \if@nobreak\ifvmode\nobreak\fi\fi}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@markextra}
% Internal macro to store the extra marks in the marks storage.\\
%   Note: Put \texttt{\#1\#2} in toks register.
%    \begin{macrocode}
\def\@markextra#1#2#3#4#5#6{\@temptokena {{#1}{#2}}%
  \unrestored@protected@xdef\@themark{\the\@temptokena{#5}{#6}}}
%    \end{macrocode}
% \end{macro}
% \changes{extramarks v4.5}{2024/11/30}{Add commands
% \cs{extramarksleft} and \cs{extramarksright} for compatibility with
% \Package{extramarks} version 5.}
% \begin{macro}{\extramarksleft}
% This command is used to define the left extra mark.
% As this is not independent from the other marks, it is not perfect.
%    \begin{macrocode}
\def\extramarksleft#1{%
  \begingroup
  \let\label\relax \let\index\relax \let\glossary\relax
  \expandafter\@markextraleft\@themark{#1}%
  \@temptokena \expandafter{\@themark}%
  \mark{\the\@temptokena}%
  \endgroup
  \if@nobreak\ifvmode\nobreak\fi\fi}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\@extramarksleft}
% Internal macro to store the left mark in the marks storage.\\
%   Note: Put \texttt{\#1\#2} and \texttt{\#4}in toks registers.
%    \begin{macrocode}
\def\@markextraleft#1#2#3#4#5{\@temptokena {{#1}{#2}}%
  \@temptokenb {{#4}}%
  \unrestored@protected@xdef\@themark{\the\@temptokena{#5}\the\@temptokenb}}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\extramarksright}
% This command is used to define the right extra mark.
% As this is not independent from the other marks, it is not perfect.
%    \begin{macrocode}
\def\extramarksright#1{%
  \begingroup
  \let\label\relax \let\index\relax \let\glossary\relax
  \expandafter\@markextraright\@themark{#1}%
  \@temptokena \expandafter{\@themark}%
  \mark{\the\@temptokena}%
  \endgroup
  \if@nobreak\ifvmode\nobreak\fi\fi}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\@extramarksright}
% Internal macro to store the right mark in the marks storage.\\
%   Note: Put \texttt{\#1\#2\#3} in toks register.
%    \begin{macrocode}
\def\@markextraright#1#2#3#4#5{\@temptokena {{#1}{#2}{#3}}%
  \unrestored@protected@xdef\@themark{\the\@temptokena{#5}}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\firstleftxmark}
% \begin{macro}{\firstrightxmark}
% \begin{macro}{\topleftxmark}
% \begin{macro}{\toprightxmark}
% \begin{macro}{\lastleftxmark}
% \begin{macro}{\lastrightxmark}
% \begin{macro}{\firstxmark}
% \begin{macro}{\lastxmark}
% \begin{macro}{\topxmark}
% The new extra marks.
%    \begin{macrocode}
\def\firstleftxmark{\expandafter\@leftxmark
      \firstmark\@empty\@empty\@empty\@empty}
\def\firstrightxmark{\expandafter\@rightxmark
      \firstmark\@empty\@empty\@empty\@empty}
\def\topleftxmark{\expandafter\@leftxmark
      \topmark\@empty\@empty\@empty\@empty}
\def\toprightxmark{\expandafter\@rightxmark
      \topmark\@empty\@empty\@empty\@empty}
\def\lastleftxmark{\expandafter\@leftxmark
      \botmark\@empty\@empty\@empty\@empty}
\def\lastrightxmark{\expandafter\@rightxmark
      \botmark\@empty\@empty\@empty\@empty}
\let\firstxmark\firstleftxmark
\let\lastxmark\lastrightxmark
\let\topxmark\topleftxmark
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@tleftxmark}
% \begin{macro}{\@rightxmark}
% Internal macros to extract the extra marks out of the marks storage.
%    \begin{macrocode}
\def\@leftxmark#1#2#3#4{#3}
\def\@rightxmark#1#2#3#4{#4}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
%</extramarks>
%
% \section{fancyheadings.sty}
%
% Fancyheadings.sty was the original style file (as they were called
% then) to implement fancy headers and footers in \LaTeX. This was in the time
% when MSDOS was stil quite a dominant ``Operating System''. It had a
% nasty property (amongst others): filenames consisted of at most 8
% characters + a 3 character extension. This meant that the name
% '\texttt{fancyheadings.sty}' was internally truncated in MSDOS to
% '\texttt{fancyhea.sty}', although it was perfectly OK to say
% 'fancyheadings' in \LaTeX. However, some people started to write also
% 'fancyhea' in \LaTeX{} documents, which made them unportable to for
% example Unix systems, unless there a copy or link was made to
% 'fancyhea.sty'. I found this so annoying that I decided to rename the
% package to 'fancyhdr.sty'. This package has evolved to a version that
% is incompatible with the original 'fancyheadings'. Fancyheadings
% should no longer be used, therefore this package is provided that
% issues a clear warning and then switches to fancyhdr.
%
%
%<*fancyheadings>
%    \begin{macrocode}
\PackageWarningNoLine{fancyheadings}{%
  Please stop using fancyheadings!\MessageBreak
  Use fancyhdr instead.\MessageBreak
  We will call fancyhdr with the very same\MessageBreak
  options you passed to fancyheadings.\MessageBreak
  \MessageBreak
  fancyhdr is 99 percent compatible with\MessageBreak
  fancyheadings. The only incompatibility is\MessageBreak
  that \protect\headrulewidth\space and \protect\footrulewidth\space
     and\MessageBreak
  their \protect\plain... versions are no longer length\MessageBreak
  parameters, but normal macros (to be changed\MessageBreak
  with \protect\renewcommand\space rather than \protect\setlength).}
\RequirePackage{fancyhdr}
%    \end{macrocode}
%</fancyheadings>
%
%
% \Finale
\endinput
