LP(4) UNIX Programmer's Manual LP(4) NAME lp - line printer SYNOPSIS /sys/conf/SYSTEM: NLP _l_p__p_r_i_n_t_e_r_s # Line Printer LP_MAXCOL _1_3_2 # Maximum number of columns on line printers /etc/dtab: #Name Unit# Addr Vector Br Handler(s) # Comments lp ? 177514 200 4 lpintr # lp-11 line printer major device number(s): raw: 5 minor device encoding: bit 01 specifies 64-character set (instead of 96-character set) bits 06 are reserved bits 0370 specify line printer unit: * 8 DESCRIPTION _L_p provides the interface to any of the standard DEC line printers on an LP-11 parallel interface. When it is opened or closed, a suitable number of page ejects is generated. Bytes written are printed. The unit number of the printer is specified by the minor device after removing the low 3 bits, which act as per- device parameters. Currently only the lowest of the low three bits is interpreted: if it is set, the device is treated as having a 64-character set, rather than a full 96-character set. In the resulting half-ASCII mode, lower case letters are turned into upper case and certain charac- ters are escaped according to the following table: { -( } -) ` -' | -! ~ -^ The driver correctly interprets carriage returns, back- spaces, tabs, and form feeds. Lines longer than the maximum page width are truncated. The page width is specified via the LP_MAXCOL definition, set to 132 in the GENERIC distri- bution. FILES /dev/lp /dev/MAKEDEV script to create special files /dev/MAKEDEV.local script to localize special files Printed 11/26/99 January 28, 1988 1 LP(4) UNIX Programmer's Manual LP(4) SEE ALSO lpr(1), dtab(5), autoconfig(8) DIAGNOSTICS None. BUGS Although the driver supports multiple printers this has never been tried. Printed 11/26/99 January 28, 1988 2